Lesso America
PVC DWV Vent Ell (HUB x HUB)
- SKU:
- LP331
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV Vent Ell (HUB x HUB)
PVC DWV Vent Ell (HUB x HUB) provides a directional transition within compatible PVC drainage, waste, and vent piping systems, particularly where a vent-line change in direction is required. The fitting incorporates two receiving hub connections within a molded vent elbow body.
The HUB x HUB configuration provides receiving hubs on both ends for connection to compatible PVC DWV piping. Its compact vent elbow design allows the piping run to change direction within the selected vent layout.
Product Highlights
- PVC construction
- DWV vent fitting
- Vent elbow design
- Two hub connections
- HUB x HUB configuration
- Compact molded fitting body
- Supports compatible vent piping layouts
- Provides a directional transition within PVC DWV vent piping
Technical Specifications
| Product Type | Vent Ell |
|---|---|
| Manufacturer | LESSO America |
| Material | PVC |
| Product Series | PVC DWV Fittings |
| Connection | Hub x Hub |
| Connection Abbreviation | HUB x HUB |
| Number of Connections | 2 |
| Configuration | Vent Elbow |
| Primary Function | Provide a Directional Transition in Compatible PVC DWV Vent Piping |
Connection Configuration
The first receiving hub accepts appropriately sized compatible PVC DWV piping using the proper joining procedure.
The opposite receiving hub accepts the adjoining compatible PVC DWV pipe while completing the vent-line transition.
Vent Ell Design
The vent ell provides a directional transition within compatible PVC DWV vent piping.
The two receiving hubs connect adjoining compatible pipe while the molded elbow body redirects the vent-line run.
The compact configuration allows the fitting to integrate into properly selected vent piping layouts without requiring multiple separate connection fittings.
Why Choose a PVC DWV Vent Ell?
- Elbow body
- Two connections
- Directional transition
- Compact configuration
- Supports vent routing
- PVC construction
- Two receiving hubs
- Compatible DWV use
- Vent-line application
- One-piece molded fitting
Typical Applications
- Vent piping
- DWV layouts
- Fixture vents
- Residential vent systems
- Commercial vent installations
- Vent routing
- Pipe alignment
- Vertical transitions
- Horizontal vent changes
- Compatible DWV modifications
Standards & Compliance
- PVC DWV System Compatibility – Select the fitting according to the requirements of the adjoining drainage, waste, and vent piping system.
- Manufacturer Documentation – Confirm applicable dimensions, standards, certifications, listings, and connection requirements using current LESSO technical literature.
- Project Requirements – Verify applicable plumbing, DWV, vent-piping, and local authority requirements before installation.
Requirements can vary according to fitting size, vent layout, installation orientation, adjoining piping, and the complete DWV system.
Refer to the Lesso Product Catalog and PVC Schedule 40 & DWV Technical Manual for current dimensional information, standards, certifications, listings, and technical requirements.
Construction Details
The fitting is manufactured from PVC and incorporates receiving hub connections on both ends.
The molded vent elbow body redirects the adjoining compatible vent piping through the required fitting configuration.
The one-piece construction provides a compact directional transition for properly selected PVC DWV vent applications.
Installation & Selection Considerations
- Confirm the required fitting size.
- Verify the HUB x HUB configuration.
- Check PVC DWV system compatibility.
- Confirm the intended vent application.
- Verify the required fitting orientation before installation.
Review the Lesso Product Catalog and PVC Schedule 40 & DWV Technical Manual for additional vent ell information, hub connection details, dimensions, standards, and technical guidance for compatible PVC DWV piping systems.
Need Help Selecting a PVC DWV Vent Ell?
Our GetPipe.com team can help review the required size, HUB x HUB configuration, vent application, fitting orientation, adjoining DWV pipe, and system compatibility before you order.
Frequently Asked Questions
What is a PVC DWV Vent Ell used for?
It provides a directional transition within a compatible PVC DWV vent piping layout.
What does HUB x HUB mean?
It means both connection ends use receiving hubs for compatible PVC DWV piping.
Is this fitting intended for vent piping?
Yes. This fitting is identified as a vent ell for compatible PVC DWV vent applications.
How many connections does it have?
The fitting has two receiving hub connections.
Does the fitting change the direction of the vent run?
Yes. The molded elbow configuration redirects the adjoining vent piping.
What should I confirm before ordering?
Confirm the required size, HUB x HUB configuration, vent application, fitting orientation, and PVC DWV compatibility.
Important Ordering & Installation Notes
- Confirm the required nominal size.
- Verify the HUB x HUB configuration.
- Inspect both hub connections before use.
- Confirm the intended vent application.
- Verify the required fitting orientation.
