Lesso America
PVC DWV Trap Adapter-Male (SPG x SLIP)
- SKU:
- LP103
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV Trap Adapter-Male (SPG x SLIP)
PVC DWV Male Trap Adapters provide a convenient transition between PVC DWV piping and tubular slip-joint trap assemblies used beneath sinks, lavatories, and other plumbing fixtures.
Featuring a male spigot (SPG) end and a slip-joint connection, this adapter allows the spigot end to fit into a compatible hub fitting while the slip connection accepts compatible tubular drain components. Durable, corrosion-resistant PVC construction provides dependable service while allowing the trap assembly to be removed when cleaning, maintenance, or replacement is required.
Product Highlights
- PVC DWV male trap adapter
- Spigot (SPG) x Slip connection
- Connects PVC DWV piping to tubular slip-joint traps
- Male spigot end fits into a compatible hub fitting
- Slip-joint connection allows trap removal
- Designed for non-pressurized drain, waste, and vent systems
- Durable PVC construction
- Corrosion-resistant material
- Suitable for sink and fixture drain applications
- Allows easier trap cleaning and maintenance
- Suitable for residential and commercial plumbing systems
Technical Specifications
| Product Type | Male DWV Trap Adapter |
|---|---|
| Material | PVC |
| Connection Type | Spigot (SPG) x Slip |
| Spigot Connection | Fits Into Compatible Hub |
| Trap Connection | Tubular Slip-Joint |
| System Type | Drain, Waste & Vent (DWV) |
| Pressure Service | Non-Pressure |
| Primary Function | Transition from PVC DWV Piping to Tubular Trap Assembly |
| Typical Applications | Sinks, Lavatories, and Compatible Fixture Drains |
Connection Configuration
Male Spigot End
The SPG end is designed to fit into a compatible PVC hub fitting, providing a compact connection to the DWV piping system.
Trap Transition
The adapter creates the transition between the permanent PVC DWV piping and the removable tubular trap assembly.
Slip Connection
The slip-joint side accepts compatible tubular drain components and allows the trap assembly to be removed for service.
Construction Details
The adapter is manufactured from durable PVC for corrosion resistance and dependable service in compatible non-pressure drain, waste, and vent systems.
The male spigot end is designed to fit into a compatible hub fitting, while the slip-joint side provides the connection point for a tubular trap or fixture drain assembly.
This configuration combines a permanent DWV-side connection with a serviceable trap connection, allowing the tubular assembly to be disconnected when cleaning or maintenance is necessary.
Why Use a Male Trap Adapter?
DWV-to-Trap Transition
- Transitions PVC DWV piping to tubular drain components
- Spigot end fits into a compatible hub
- Compact connection configuration
- Designed for fixture drain applications
- Useful beneath sinks and lavatories
Serviceable Slip Joint
- Allows trap assembly removal
- Simplifies drain cleaning
- Provides access for maintenance
- Allows replacement of compatible tubular components
- Convenient for under-sink plumbing installations
Typical Applications
Sink & Lavatory Drains
- Kitchen sink drains
- Bathroom lavatories
- Utility sinks
- Compatible fixture drains
- Under-sink DWV connections
Trap Connections
- Tubular trap assemblies
- Removable P-trap connections
- Fixture drain transitions
- Maintenance-accessible drain connections
- Residential and commercial plumbing
Installation Considerations
Install the spigot end into a compatible PVC hub using the appropriate solvent-weld procedure. Clean and prepare mating surfaces and use compatible PVC primer and solvent cement where required.
Assemble the tubular slip-joint connection using compatible slip-joint components. Position and tighten the connection sufficiently to create a secure seal while maintaining the ability to disassemble the trap for future maintenance.
Our plumbing specialists can help review your DWV connection, tubular trap size, fixture drain configuration, and installation requirements before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is a PVC DWV trap adapter?
A trap adapter provides a transition between PVC DWV piping and a compatible tubular slip-joint trap or fixture drain assembly.
What does SPG mean?
SPG means spigot. The male spigot end is designed to fit into a compatible hub fitting.
What does SLIP mean?
SLIP refers to the slip-joint connection used with compatible tubular drain and trap components.
Where is this fitting commonly used?
It is commonly used beneath sinks, lavatories, and other compatible plumbing fixtures where tubular traps connect to PVC DWV piping.
Why use a slip-joint trap connection?
The slip-joint connection allows the tubular trap assembly to be removed when cleaning, maintenance, or replacement is required.
Does the spigot end fit over or inside a hub?
The supplied product information identifies the male spigot end as fitting into a compatible hub fitting.
Is this fitting designed for pressure piping?
No. This trap adapter is intended for non-pressurized drain, waste, and vent applications.
What material is the adapter made from?
The adapter is manufactured from corrosion-resistant PVC.
Can the trap be removed after installation?
Yes. The slip-joint side is specifically useful because it allows the compatible tubular trap assembly to be disconnected for service.
What should I verify before ordering?
Confirm the spigot connection size, tubular slip-joint size, trap configuration, and compatibility with the existing PVC DWV system.
Important Ordering & Installation Notes
- This listing is for a PVC DWV Trap Adapter-Male with SPG x SLIP connections.
- Verify both connection sizes before ordering.
- The male spigot end is designed to fit into a compatible hub fitting.
- The slip-joint side is designed for compatible tubular trap components.
- Designed for non-pressurized drain, waste, and vent applications.
- Use compatible PVC primer and solvent cement on the permanent DWV-side connection where required.
- Clean and prepare mating surfaces before solvent welding.
- Allow solvent-weld joints to cure according to the cement manufacturer's recommendations.
- Use the appropriate slip-joint components for the tubular drain connection.
- Align tubular components before tightening the slip-joint connection.
- Avoid excessive tightening that could damage compatible tubular components.
- Maintain access to the trap where required for cleaning and maintenance.
- Do not use this DWV fitting for pressure applications.
- Check completed connections for leaks before normal use.
- Follow applicable plumbing codes and installation requirements.
