Spears
PVC DWV Flush Bushing (SPIGOT x HUB)
- SKU:
- P107
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV Flush Bushing (SPIGOT x HUB)
PVC DWV Flush Bushing (SPIGOT x HUB) provides a compact transition between compatible PVC DWV components using spigot and hub connection interfaces. The flush bushing configuration fits within the adjoining connection arrangement while minimizing additional fitting length.
The SPIGOT x HUB bushing configuration combines two different connection interfaces within one PVC DWV fitting. Selection should account for both nominal sizes, required transition, adjoining components, joining requirements, insertion depth, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- Flush bushing configuration
- Spigot x hub connections
- Provides a compact size transition
- Minimizes additional fitting length
- Connects compatible PVC DWV components
- Provides a compact transition between differing compatible connection sizes
Technical Specifications
| Product Type | Flush Bushing |
|---|---|
| Material | PVC |
| System Type | DWV |
| Connection | Spigot x Hub (SPIGOT x HUB) |
| Connection Count | Two |
| Fitting Configuration | Flush Bushing |
| Spigot Interface | Compatible Receiving Hub |
| Hub Interface | Compatible PVC DWV Pipe or Fitting |
| Connection Style | Spigot x Hub |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Piping Configuration | Compact Size or Connection Transition |
| Primary Function | Provide a Flush Transition Between Compatible PVC DWV Components |
Flush Bushing Design
The flush bushing configuration provides a compact transition between compatible PVC DWV components while limiting additional fitting projection. This can help where the piping arrangement requires a size or connection transition in a confined installation area.
Both nominal sizes should be confirmed before permanent assembly. Planning the transition helps coordinate adjoining fittings, pipe routing, insertion depth, support, and available working clearance.
Spigot & Hub Connections
The spigot connection fits into an appropriately sized compatible receiving hub, while the hub connection receives the corresponding compatible PVC DWV pipe or fitting interface. Each side should be matched carefully before assembly.
The mating surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct orientation, and careful alignment help establish the connection without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the flush bushing to integrate into compatible drain, waste, and vent piping arrangements requiring a compact transition. Matching both nominal sizes and connection interfaces to the adjoining components helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, joining materials, piping support, slope where applicable, and local installation requirements should all be considered during fitting selection.
Compact Transition Application
A PVC DWV Flush Bushing provides a direct transition between compatible connection sizes without adding the length of a larger adapter assembly. The fitting can be useful where installation space around the transition is limited.
Installation planning should consider both nominal sizes, insertion depth, adjoining component alignment, nearby fittings, and available clearance. Connected piping should align naturally so the bushing is not relied upon to correct offsets or support improperly positioned piping.
Installation & Selection Considerations
- Confirm both nominal sizes.
- Verify the SPIGOT x HUB arrangement.
- Check PVC DWV compatibility.
- Match both ends to adjoining components.
- Confirm alignment before final assembly.
Our PVC fitting specialists can help review your nominal sizes, DWV requirements, SPIGOT x HUB configuration, required transition, adjoining components, joining requirements, insertion depth, piping alignment, and available installation clearance before you order.
Frequently Asked Questions
What is a PVC DWV Flush Bushing used for?
It provides a compact transition between compatible PVC DWV components using spigot and hub connection interfaces.
What does SPIGOT x HUB mean?
It identifies a spigot connection at one end and a hub connection at the other.
Why is this called a flush bushing?
The compact bushing configuration minimizes additional fitting projection compared with a larger transition assembly.
What connects to the spigot end?
The spigot end fits into an appropriately sized compatible receiving hub.
How is the fitting assembled?
Compatible PVC DWV components should be joined using the appropriate preparation and joining procedure for the installation.
What should I confirm before ordering?
Confirm both nominal sizes, SPIGOT x HUB arrangement, PVC DWV compatibility, and adjoining connection interfaces.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm both nominal connection sizes.
- Verify the required transition.
- Prepare adjoining components correctly.
- Confirm alignment before final assembly.
