Lesso America
PVC DWV 90 Elbow Short Bend (HUB x HUB)
- SKU:
- LP300S
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
PVC DWV 90° Elbow Short Bend (HUB x HUB)
PVC DWV 90° Short Bend Elbows provide a compact 90-degree directional change for drain, waste, and vent piping systems where installation space is limited.
Featuring hub connections on both ends, this short-bend elbow is designed to connect compatible PVC DWV pipe while redirecting the piping run by 90 degrees within a compact footprint. The short-radius configuration is useful in confined plumbing layouts where a broader sweep fitting may not fit. Constructed from corrosion-resistant PVC, this fitting is designed for dependable service in residential, commercial, and industrial DWV applications.
Product Highlights
- PVC DWV 90-degree short bend elbow
- Hub x Hub connection configuration
- Provides a compact 90-degree directional change
- Designed for tight-space plumbing layouts
- Two hub connections accept compatible PVC DWV pipe
- Short-radius configuration
- Designed for solvent-weld installation
- Corrosion-resistant PVC construction
- Suitable for drain, waste, and vent systems
- Suitable for residential applications
- Suitable for commercial applications
- Suitable for industrial DWV applications
- Designed for secure, leak-resistant joining
- Provides a compact alternative where space is limited
Technical Specifications
| Product Type | PVC DWV 90° Elbow Short Bend |
|---|---|
| Material | PVC |
| Connection Type | Hub x Hub |
| Angle | 90 Degrees |
| Pattern | Short Bend |
| Number of Connections | 2 |
| Joint Method | Solvent Weld |
| System Type | Drain, Waste, and Vent (DWV) |
| Primary Function | Provide a Compact 90-Degree Change of Direction in PVC DWV Piping |
| Typical Applications | Residential, Commercial, and Industrial Drain, Waste, and Vent Piping Systems |
Connection Configuration
Inlet Hub
One hub connection accepts compatible PVC DWV pipe for solvent-weld installation.
Outlet Hub
The second hub redirects the piping run by 90 degrees and accepts compatible PVC DWV pipe.
Short Bend Design
The short-bend configuration provides a tighter 90-degree turn than a long-sweep elbow, allowing the fitting to occupy less installation space.
This compact geometry can be useful in confined plumbing layouts where available clearance is limited.
Both hub connections are designed for solvent-weld assembly with compatible PVC DWV pipe.
Why Choose a PVC DWV 90° Short Bend Elbow?
Compact Direction Change
- Creates a full 90-degree turn
- Short-radius configuration
- Useful where installation space is limited
- Two simple hub connections
- Suitable for compact DWV layouts
PVC DWV Benefits
- Corrosion-resistant construction
- Lightweight and easy to handle
- Simple solvent-weld installation
- Compatible with PVC DWV piping
- Suitable for a wide range of drainage applications
Typical Applications
DWV Piping
- Drain lines
- Waste piping
- Vent piping
- General drainage
- PVC DWV branch piping
Space-Restricted Layouts
- Confined plumbing spaces
- Compact piping assemblies
- Residential plumbing
- Commercial plumbing
- Industrial DWV systems
Installation
Verify both nominal hub sizes before installation and confirm that the short-bend configuration is appropriate for the intended PVC DWV piping layout.
Cut all mating PVC pipe ends square and remove burrs. Clean and prepare the pipe and hub surfaces according to accepted PVC solvent-weld installation procedures.
Dry-fit the elbow and adjoining pipe before applying solvent cement to confirm orientation, alignment, and available clearance.
Apply compatible PVC primer and solvent cement as required for the piping system and fully seat each pipe into its corresponding hub while maintaining the intended 90-degree alignment.
Allow completed joints to cure according to the solvent cement manufacturer's recommendations before placing the drainage system into service.
Our piping specialists can help review your pipe size, directional change, available installation space, and PVC DWV compatibility before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is a PVC DWV 90° short bend elbow used for?
It is used to create a compact 90-degree directional change in a PVC drain, waste, and vent piping system.
What does HUB x HUB mean?
It means both ends are hub-style socket connections designed to accept compatible PVC DWV pipe.
What makes this fitting a short bend?
The fitting uses a tighter bend radius than a long-sweep elbow, allowing the 90-degree turn to fit into a smaller space.
How is this different from a long-sweep elbow?
A short-bend elbow makes the directional change within a more compact radius, while a long-sweep elbow uses a broader curve and requires more installation space.
How are the hub connections installed?
The hub connections are designed for solvent-weld installation using compatible PVC joining materials.
Is PVC resistant to corrosion?
Yes. The supplied product information identifies this fitting as corrosion-resistant PVC suitable for long-term DWV service.
Can this fitting be used in residential plumbing?
Yes. The supplied product information identifies residential DWV systems as a typical application.
Can it be used in commercial or industrial applications?
Yes. The supplied product information also identifies commercial and industrial DWV applications.
Should the fitting be dry-fitted before cementing?
Yes. Dry-fitting helps confirm orientation, pipe engagement, and available clearance before the solvent-weld joints are completed.
What should I verify before ordering?
Confirm both hub sizes, the required 90-degree directional change, available installation space, and compatibility with the intended PVC DWV piping system.
Important Ordering & Installation Notes
- This listing is for a PVC DWV 90° Elbow Short Bend with HUB x HUB connections.
- Verify both nominal hub sizes before ordering.
- The fitting provides a 90-degree directional change.
- The short-bend design uses a tighter radius than a long-sweep elbow.
- Confirm that the compact bend configuration is appropriate for the intended installation.
- Both connections are hub-style connections.
- Both hubs accept compatible PVC DWV pipe.
- Dry-fit the complete assembly before applying solvent cement.
- Confirm available clearance and piping alignment before final assembly.
- Use compatible PVC primer and solvent cement as required for the piping system.
- Cut pipe square and remove burrs before assembly.
- Clean and prepare all mating surfaces before solvent-weld installation.
- Fully seat each PVC pipe into its corresponding hub.
- Maintain correct 90-degree alignment while the joints set.
- Allow completed joints to cure according to the solvent cement manufacturer's recommendations before service.
- Confirm installation requirements for the intended residential, commercial, or industrial DWV application.
- Consult manufacturer documentation for complete dimensions and application requirements.
- Follow applicable plumbing codes and manufacturer installation recommendations.
