Midland Industries
Midland CSA Gas Ball Valve (Flare x MIP)
- Availability:
- Allow 2-3 Days to Ship
- Weight:
- 0.00 LBS
Description
Midland CSA Gas Ball Valve (Flare x MIP)
Midland CSA Gas Ball Valves provide dependable manual shutoff for compatible natural gas and LP gas piping systems using a flare-to-male-pipe connection configuration.
Manufactured from forged brass, these quarter-turn ball valves combine a male NPT connection with a flare connection to simplify transitions between threaded gas piping and compatible flared tubing. CSA certification supports use in approved residential, commercial, and light industrial fuel-gas applications.
Product Highlights
- Midland CSA-certified gas ball valve
- Flare x MIP connection configuration
- Forged brass body construction
- Full-port valve design
- Quarter-turn lever handle operation
- Designed for natural gas and LP gas service
- Bubble-tight shutoff performance
- Corrosion-resistant brass construction
- Provides a transition between threaded pipe and flared tubing
- Available in multiple connection sizes
Technical Specifications
| Product Type | Gas Ball Valve |
|---|---|
| Brand | Midland |
| Body Material | Forged Brass |
| Connection Configuration | Flare x MIP |
| Pipe Connection | Male NPT / MIP |
| Tubing Connection | Flare |
| Valve Style | Full-Port Ball Valve |
| Operation | Quarter-Turn Lever Handle |
| Certification | CSA |
| Typical Media | Natural Gas and LP Gas |
| Typical Applications | Residential, Commercial, and Light Industrial Fuel-Gas Systems |
Connection Configuration
Male NPT / MIP
The male pipe thread connection installs into a compatible female NPT fitting or piping connection.
Flare Connection
The flare end connects to properly prepared compatible flared tubing using the appropriate flare fitting arrangement.
Quarter-Turn Shutoff
The lever handle rotates 90 degrees between the open and closed positions for quick manual gas shutoff.
Construction Details
The valve body is manufactured from forged brass to provide dependable mechanical strength and corrosion resistance in compatible fuel-gas systems.
A precision-machined ball and seating system provides smooth quarter-turn operation and dependable shutoff with relatively low operating torque.
The combination flare and MIP configuration allows the valve to transition directly between compatible threaded piping and flared tubing without requiring a separate valve and transition fitting in many installations.
Why Use a Flare x MIP Gas Valve?
Simplified Transition
- Combines two connection styles in one valve
- Connects threaded piping to flared tubing
- Can reduce the number of separate fittings required
- Compact installation footprint
- Useful near gas-fired appliances and equipment
Fast Manual Shutoff
- Quarter-turn operation
- Clear open and closed positions
- Simple lever-handle control
- Designed for positive isolation
- No external actuator required
Typical Applications
Residential & Commercial
- Natural gas appliance connections
- LP gas equipment connections
- Fuel-gas branch lines
- Equipment isolation points
- Building gas piping systems
Light Industrial
- Gas-fired equipment
- Utility gas systems
- Process support equipment
- Fuel-gas isolation points
- Compatible flared tubing transitions
CSA Certification
These valves are identified as CSA certified for approved gas applications. Certification helps establish that the valve is intended for applicable fuel-gas service when installed within its specified ratings and in accordance with governing codes.
Our valve, fitting, and industrial product specialists can help review your valve size, FIP connection requirements, pressure rating, handle configuration, media compatibility, and application before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What connection configuration does this valve use?
This valve uses a flare connection on one side and a male pipe thread connection on the other, commonly described as Flare x MIP.
What material is the valve made from?
The supplied product information identifies forged brass construction.
What gases is this valve intended for?
The supplied product information identifies approved natural gas and LP gas applications.
Is this valve CSA certified?
Yes. The supplied product information identifies the valve as CSA certified for gas service.
How is the valve operated?
The valve uses a quarter-turn lever handle for manual opening and closing.
What does MIP mean?
MIP refers to a male iron pipe style threaded connection, commonly used to describe a male NPT pipe connection.
What is the purpose of the flare connection?
The flare connection allows the valve to connect to compatible flared tubing without using pipe threads on that side of the valve.
What should I verify before ordering?
Confirm both connection sizes, flare compatibility, MIP thread size, gas type, system pressure, and applicable code requirements before ordering.
Important Ordering & Installation Notes
- This listing is for Midland CSA Gas Ball Valves with Flare x MIP connections.
- Confirm both connection sizes before ordering.
- Verify the male NPT / MIP connection matches the intended female threaded piping connection.
- Verify the flare connection matches the intended tubing size and flare type.
- Use only with approved natural gas or LP gas applications within manufacturer specifications.
- Do not apply pipe thread sealant to the flare sealing surface.
- Use approved gas-rated thread sealant on the NPT connection where required.
- Do not rely on excessive tightening to seal a flare connection.
- Inspect flare surfaces and tubing for damage before assembly.
- Support connected tubing and piping to prevent excessive mechanical load on the valve.
- After installation, perform required leak testing using an approved method before placing the system into service.
- Never check fuel-gas connections for leaks using an open flame.
- Confirm the valve is fully open or fully closed during normal isolation service.
- Install in accordance with applicable plumbing, fuel-gas, mechanical, and local codes.
- Follow Midland manufacturer installation and operating requirements.
