Dixon
K-Series Hydraulic Dust Cap & Plug Combination
- SKU:
- NLDIX8KDP-K8DC
- Availability:
- Limited quantity available.
- Weight:
- 0.15 LBS
Description
K-Series Hydraulic Dust Cap & Plug Combination
K-Series Hydraulic Dust Cap & Plug Combination provides protective coverage for compatible 1" Dixon K-Series ISO-A hydraulic quick-disconnect components when the connection is not in use.
Constructed from nitrile, the Dixon 8KDP-K8DC combines a dust plug and dust cap in one matched protective set. The components help shield exposed coupling interfaces from dirt, moisture, and other contamination during storage or disconnected service.
Product Highlights
Dixon 8KDP-K8DC combines a 1" K-Series ISO-A dust plug and dust cap for compatible hydraulic quick-disconnect components.
Nitrile construction helps protect exposed coupling interfaces from contamination while disconnected.
Technical Specifications
K-Series Dust Cap & Plug Configuration
The dust plug covers the open side of the compatible K-Series connection to help keep debris and contamination away from the exposed internal interface.
The matching dust cap covers the mating quick-disconnect component when the hydraulic connection has been separated and is not in active use.
K-Series ISO-A Dust Protection Design
The 8KDP-K8DC provides both protective pieces required for a compatible 1" K-Series ISO-A quick-disconnect connection. Keeping the cap and plug together allows both disconnected halves of the hydraulic connection to be protected at the same time.
This is useful on equipment where hydraulic hoses or components are disconnected between uses. Both protective pieces should be installed promptly after separation so exposed connection surfaces are not left open to surrounding debris.
Dixon specifies nitrile construction for the 8KDP-K8DC combination. The flexible material allows the protective components to fit over their intended K-Series interfaces while providing a reusable barrier around the disconnected ends.
Inspect both pieces periodically for cracking, tearing, hardening, or deformation. A damaged cap or plug may no longer remain securely positioned or provide adequate protection to the exposed hydraulic connection.
Hydraulic quick-disconnect interfaces can be exposed to dirt, dust, moisture, and jobsite debris when left open. The dust cap and plug help cover these exposed areas while the connection is separated from its mating component.
Before reconnecting the hydraulic system, remove the protective pieces and inspect the mating surfaces for contamination. Clean the coupling components as required so debris is not carried into the connection during assembly.
Dixon assigns the 8KDP-K8DC combination specifically to the 1" body size within the K-Series ISO-A dust cap and plug family. Other K-Series body sizes use different combination part numbers.
Confirm the installed body size and K-Series configuration before ordering replacement protection. Selecting the correct size helps ensure the cap and plug fit their intended quick-disconnect components without forcing or loose engagement.
Installation & Selection Considerations
Confirm Dixon part number 8KDP-K8DC.
Verify the 1" body size.
Confirm K-Series ISO-A compatibility.
Inspect both protective components.
Clean connections before reconnection.
Our product specialists can help review 8KDP-K8DC compatibility, 1" body size, K-Series ISO-A configuration, existing quick-disconnect components, and replacement protection requirements before you order.
Frequently Asked Questions
What size does the Dixon 8KDP-K8DC fit?
Dixon lists the 8KDP-K8DC for compatible 1" K-Series ISO-A quick-disconnect components.
What material is the combination made from?
Dixon specifies nitrile construction for the 8KDP-K8DC.
What components are included?
The combination includes a dust plug and a dust cap for protecting both sides of a compatible disconnected hydraulic connection.
What is the purpose of the dust cap and plug?
They cover exposed quick-disconnect interfaces to help keep dirt, moisture, and other contamination away from the connection while it is separated.
Is the 8KDP-K8DC part of the ISO-A family?
Yes. Dixon lists it under the K-Series ISO-A Interchange combination dust cap and plug family.
What should be checked before reconnecting the hydraulic system?
Remove the protective pieces and inspect the mating quick-disconnect surfaces for dirt, damage, or contamination before coupling the components together.
Important Ordering & Installation Notes
- Confirm Dixon part number 8KDP-K8DC.
- Verify the 1" body size.
- Confirm K-Series ISO-A compatibility.
- Verify nitrile construction.
- Inspect both pieces before use.
- Cover disconnected components promptly.
- Keep protective surfaces clean.
- Replace torn or damaged components.
- Inspect mating connections before assembly.
- Clean hydraulic interfaces before reconnection.
