Dixon
HUMF206800CS - Dixon Complete Assembly Frac Fitting
- SKU:
- HUMF206800CS
- Availability:
- Usually Ships Same Day
- Weight:
- 93.00 LBS
Description
Engineered to connect.
Built to perform.
HUMF206800CS - Dixon Complete Assembly Frac Fitting Dixon HUMF206800CS is a male/female complete assembly for transferring water and sand slurry at hydraulic fracturing sites. Its one-piece design removes the threaded joint of two-piece systems; use the specified Dixon King Crimp attachment.
Verify the complete assembly
Match the exact frac fitting, hose and King Crimp attachment. Pressure conditions differ by configuration; do not transfer another size’s assembly rating.
Selection & Installation
Fit: Select the King Crimp sleeve or ferrule and verify the fitting, hose and crimp combination.
Check: Apply the complete-assembly limit: 150 PSI at 70°F with a 3:1 safety factor and matched components.
Product documents
3 PDF REFERENCES
Ask Willy: Need help choosing the right Dixon part?
Willy can help compare male or female configuration, included nut or seal, hose construction, King Crimp attachment and the exact pressure and temperature conditions for this frac assembly.
Frequently Asked Questions
What does the one-piece design change?
Dixon describes the one-piece fitting as eliminating the leak path associated with two-piece threaded systems. It is still part of a hose assembly requiring the specified King Crimp components and correct crimping procedure.
Which seal or assembly distinction applies here?
This is a male/female complete assembly. Dixon identifies an O447BU nitrile rubber O-ring. Use the stated 150 PSI at 70°F assembly limit rather than another size’s rating.
What safety or compatibility checks apply?
150 PSI at 70°F (21°C) 3:1 safety factor
