Dixon
HUMF100600CS - Dixon Complete Assembly Frac Fitting
- SKU:
- HUMF100600CS
- Availability:
- Usually Ships Same Day
- Weight:
- 69.40 LBS
Description
Engineered to connect.
Built to perform.
HUMF100600CS — Dixon Complete Assembly Frac Fitting The one-piece fitting design avoids the additional leak path of a two-piece threaded arrangement. The complete male/female assembly pairs the fitting components with the listed forged-steel hammer nut.
Frac Transfer Fittings
Dixon identifies water and sand-slurry transfer at hydraulic-fracturing sites; pressure capability depends on the specified complete assembly.
Selection & Installation
Build: Complete male/female assembly with the listed forged-steel hammer nut.
Check: Match hose, fitting, ferrule, seals, and exact-model operating conditions.
Product documents
4 PDF REFERENCES
Ask Willy: Need help choosing the right Dixon part?
Tell Willy your hose size, fitting half, seal requirement, ferrule, transfer medium, and working conditions. Include the existing model or a connection photo so the required configuration can be checked before ordering.
Frequently Asked Questions
What distinguishes Dixon HUMF100600CS?
The one-piece fitting design avoids the additional leak path of a two-piece threaded arrangement. The complete male/female assembly pairs the fitting components with the listed forged-steel hammer nut.
What should I check when selecting HUMF100600CS?
Dixon identifies water and sand-slurry transfer at hydraulic-fracturing sites; pressure capability depends on the specified complete assembly. Check the exact fitting drawing and applicable crimp requirements before specifying the hose assembly.
What safety or compatibility checks apply?
Confirm the complete hose assembly rating; it must not exceed its lowest-rated component. Apply the following conditions only to the specified, properly crimped Dixon combination. 230 PSI at 70°F (21°C) 4:1 safety factor
