Description
Harris 50/50 Leaded Solder
Harris 50/50 Leaded Solder 50/50 common lead-bearing solder has a wide melting range. This solder can, with some exceptions, be used to join copper and most copper alloys, lead, nickel alloys and steel. It is not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. 50/50 is available in acid core, rosin core and solid wire versions.
Available configurations have their own diameter, package, core type where applicable and Harris item number. Quantity 1 equals one package of the selected variation.
Product Highlights
- General-Purpose Leaded Solder
- Alloy composition: 50% Tin / 50% Lead with Antimony
- Designed for general-purpose soldering and compatible sheet-metal work
- Compatible with soldering guns, irons or air-fuel torches as permitted by the procedure
- Multiple diameter and package configurations where listed
- Manufactured by The Harris Products Group
Technical Specifications
| Product Type | General-Purpose Leaded Solder |
|---|---|
| Alloy | 50% Tin / 50% Lead with Antimony |
| Available Diameters | 1/8 in. (3.2 mm) |
| Available Packages | 4 ea Box; 5 lb Spool; 50 lb Box |
| Harris Item Numbers | 505061/2POP, 505065, 327883, 331753 |
| Standards | ASTM B32 Alloy Grade Sn50; J-STD-006 Sn50Pb50Sb0.4 |
| Manufacturer | The Harris Products Group |
Typical Applications
Recommended Uses
- general-purpose soldering and compatible sheet-metal work
- Compatible professional repair work
- Shop and fabrication soldering
- Properly prepared approved base metals
Selection Guidance
- Select the correct alloy ratio
- Choose the required diameter and package
- For cored solder, confirm acid or rosin core
- Verify the Harris item number before ordering
Application Guidance
Before Soldering
Identify and clean the base metal, select the correct solder and core type, and follow the current Harris procedure. Use adequate ventilation and appropriate personal protective equipment.
During and After Soldering
Use a compatible heat source and avoid overheating. Allow the joint to cool as required, remove residue according to Harris instructions and inspect the completed connection.
Safety and Use Restrictions
Important: Do not use in plumbing or potable-water applications. This is a lead-bearing product. Review all warning, SDS and regulatory information before use.
Product Resources
Review current Harris specifications, instructions and safety documentation for the selected variation.
View Harris Product InformationNeed Help Selecting Solder?
Our industrial supply specialists can help match the alloy, core, diameter and package to your application.
Frequently Asked Questions
What is Harris 50/50 Leaded Solder?
It is a Harris general-purpose leaded solder formulated for general-purpose soldering and compatible sheet-metal work.
Which variation should I order?
Select the required alloy, diameter, package and core type, then verify the matching Harris item number.
Can this solder be used for potable water?
No. This lead-bearing solder must not be used in plumbing or potable-water applications.
How is the product sold?
Quantity 1 equals one package of the selected variation.
Important Ordering Notes
- Verify the exact Harris item number.
- Select the correct diameter, package and core type.
- Confirm compatibility with the base metal and application.
- Review current Harris instructions, SDS and warning information.
