Prevost
Gray Aluminum Bent Link Pipe for Vacuum
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
Gray Aluminum Bent Link Pipe for Vacuum
Prevost PPS Gray Aluminum Bent Link Pipe provides a factory-formed offset section for industrial vacuum piping installations where a straight pipe run cannot conveniently pass around an obstruction or maintain the required alignment. Its lightweight aluminum construction integrates with compatible Prevost PPS pipe and fittings for a clean, modular piping network.
Available in 1/2", 3/4", and 1" outside diameters, this gray bent link pipe provides a ready-made transition that can simplify vacuum piping layouts while reducing the need to create an offset with multiple fittings.
Product Highlights
- Gray aluminum bent link pipe for Prevost PPS piping systems
- Designed for use in gray PPS vacuum distribution networks
- Factory-formed offset pipe section
- Part of the Prevost 100% aluminum PPS network
- Helps route piping around obstacles and alignment changes
- Can reduce the number of fittings required for certain offset installations
- Lightweight aluminum construction
- Corrosion-resistant piping material
- Maximum operating pressure of 232 PSI
- Operating temperature range of -4°F to 176°F
- Compatible with appropriately sized Prevost PPS components
- Available in 1/2", 3/4", and 1" pipe OD
Technical Specifications
| Manufacturer | Prevost |
|---|---|
| Product System | Prevost Piping System (PPS) |
| Product Type | Gray Aluminum Bent Link Pipe |
| Primary Application | Vacuum Distribution |
| Material | Aluminum |
| Color | Gray |
| Maximum Operating Pressure | 232 PSI |
| Operating Temperature | -4°F to 176°F |
| Available Pipe OD | 1/2", 3/4" and 1" |
Available Sizes & Dimensions
| Pipe OD | Prevost SKU | Dim. A | Dim. B | Dim. C |
|---|---|---|---|---|
| 1/2" | PPS LMCG16 | 3.39" | 18.9" | 0.63" |
| 3/4" | PPS LMCG20 | 3.54" | 19.17" | 0.79" |
| 1" | PPS LMCG25 | 3.74" | 19.17" | 0.98" |
Why Use a Bent Link Pipe?
Navigate Obstacles
- Provides a factory-formed offset in the pipe run
- Useful where straight pipe cannot maintain the required path
- Helps route vacuum piping around structural or mechanical obstacles
- Useful for wall, ceiling, and equipment-clearance transitions
- Supports a clean and organized piping layout
Simplify Installation
- Preformed shape eliminates field bending of straight aluminum pipe
- May reduce the need for multiple elbows to create an offset
- Integrates into compatible PPS piping networks
- Lightweight aluminum simplifies handling
- Supports modular vacuum-system layouts
Common Applications
Vacuum Pipe Routing
- Routing around columns and structural members
- Passing around production equipment
- Creating controlled offsets in vacuum lines
- Wall and ceiling transitions
- Mechanical-room vacuum piping
- Point-of-use vacuum distribution
Industrial PPS Networks
- Manufacturing facilities
- Machine shops
- Production areas
- Central vacuum distribution
- Vacuum main and branch lines
- System modifications and expansions
Selecting the Correct Size
Select the gray bent link pipe according to the outside diameter of the Prevost PPS pipe used in the vacuum network. The pipe OD must match the compatible adjoining pipe and fittings.
Installation clearance should also be reviewed before ordering. Dimensions A, B, and C vary by pipe size, so confirm that the selected bent link pipe fits within the available space and provides the required offset.
Installation Considerations
- Confirm the required pipe outside diameter before ordering.
- Review dimensions A, B, and C to verify available installation clearance.
- Use compatible Prevost PPS fittings sized for the selected pipe OD.
- Keep pipe ends clean and protected from damage before assembly.
- Prepare pipe connections according to Prevost PPS installation requirements.
- Keep the inside of the vacuum piping clean during installation.
- Support the piping network appropriately on both sides of the offset.
- Do not exceed the published maximum operating pressure of 232 PSI.
- Maintain the system within the published -4°F to 176°F operating temperature range.
- Inspect and test the completed piping network before normal operation.
- Installation should be completed by personnel familiar with industrial vacuum piping systems.
Review the Prevost gray aluminum bent link pipe specification sheet for dimensions, operating limits, and product information, or contact the GetPipe.com team for help selecting the correct pipe size and compatible PPS components.
Frequently Asked Questions
What is a gray bent link pipe used for?
A bent link pipe provides a preformed offset in a piping run, helping the vacuum line route around obstacles or transition between sections that are not directly aligned.
What sizes are available?
This listing includes 1/2", 3/4", and 1" outside-diameter options.
What is the maximum operating pressure?
The Prevost specification lists a maximum operating pressure of 232 PSI.
What is the operating temperature range?
The published operating temperature range is -4°F to 176°F.
Is this bent link pipe made from aluminum?
Yes. The gray bent link pipe is part of Prevost's 100% aluminum PPS network.
Can this pipe reduce the number of fittings required?
Depending on the piping layout, the factory-formed offset can reduce the need to create the same routing change with multiple individual fittings.
Can this connect to Prevost PPS gray pipe?
Yes. Select a bent link pipe with the same outside diameter as the compatible adjoining Prevost PPS gray pipe and fittings.
Are the dimensions the same for every size?
No. Dimensions A, B, and C vary by pipe outside diameter. Review the size-and-dimension table before ordering.
Why use a factory-formed bent pipe instead of bending straight pipe?
The preformed bent link provides a consistent factory-produced offset without requiring the installer to bend a straight aluminum pipe section in the field.
Where can I review the manufacturer's dimensions?
The Prevost gray aluminum bent link pipe specification sheet is linked in the Ask Willy section directly above.
Important Ordering Notes
- Select the bent link pipe according to the outside diameter of the adjoining PPS pipe.
- Available sizes are 1/2", 3/4", and 1".
- Each size has its own Prevost part number, weight, dimensions, and EAN-13.
- Review dimensions A, B, and C before ordering to confirm installation clearance.
- Maximum operating pressure is 232 PSI.
- Published operating temperature range is -4°F to 176°F.
- Use compatible Prevost PPS fittings and piping components.
- Confirm the intended vacuum-system layout and support requirements before installation.
- Installation should be completed by personnel familiar with industrial vacuum piping systems.
