Wal-Rich Corporation

1/2″ IPS Con-Stab Coupling SDR-9

1/2″ IPS Con-Stab Elbow SDR-9

1/2″ IPS Con-Stab Male Adapter SDR-9

1/2″ IPS Con-Stab Tee SDR-9

1/2″ IPS Floor & Ceiling Plate Less Spring Design Features: Steel Construction Chrome Finish Imported Print / View Specs PDF

1/2″ IPS Snap Well For Thermometer

1/2″ Light Duty Copper-Plated Clevis Hanger Design Features: Steel Construction Copper Plated Domestic Print / View Specs PDF

1/2″ Light Duty Steel Clevis Hanger Design Features: Steel Construction Domestic Print / View Specs PDF

1/2″ M X F Expansion Tank Isolation Valve

1/2″ Male Chrome Plated Flex Adapter (Lead-Free) Design Features: Lead Free* Brass Construction Imported Print / View Specs PDF

1/2″ Malleable Iron Railing Flange – Black Design Features: Malleable Iron Construction Available in Galvanized or Black Finish Imported Print / View Specs PDF

1/2″ Mepco # Angle Steam Trap

1/2″ Mepco Angle Steam Trap Design Features: Cast Brass Body and Cover Non-Corrosive Working Parts Stainless Steel Thermostatic Disks Simple Rugged Construction Sensitive Thermostatic Action Minimum Wear on Working Parts Thoroughly Tested Free...

1/2″ OD X 100′ White Polyethylene Tubing

1/2″ PEX Chrome-Plated Quarter Turn Sillcock (Lead-Free)

1/2″ PEX Drop Ear Ball Valve (Lead-Free)

1/2″ PEX Drop Ear Ball Valve With Drain (Lead-Free)

1/2″ Pipe Tap

1/2″ PVC “All-Around” Nailer Design Features: Isolates Supply Tubing from Wood Framing Preload with Nail Print / View Specs PDF Operating Specifications:Max Temperature: 160° F ContinuousImpact Resistant to 0° F Use:...

1/2″ PVC 2-Hole Clamp Operating Specifications:Max Temperature: 160° F ContinuousImpact Resistant to 0° F Use: Supports copper, PEX, polybuthyleneand ideally isolates CPVC tubing from wood.Reduces noise from tubing expansion and contraction...

1/2″ PVC Pipe Insulator Operating Specifications: Max Temperature: 160° F ContinuousImpact Resistant to 0° F Use: Supports copper, PEX,polybuthylene and ideally isolatesCPVC tubing from wood. Reducesnoise from tubing expansion and...

1/2″ Recessed Fire Head Guard

1/2″ Sheet Metal “ZIP” Screws Design Features: Hard Zinc Plated 1/4” Slotted Hex Head Imported Print / View Specs PDF

1/2″ Skinner Emergency Pipe Clamp

1/2″ Swivel Hanger

1/2″ SWT Hammer Arrester (Lead-Free) Design Features: Lead Free* Brass Construction Imported Print / View Specs PDF Operating Specifications:Pressure: 200 psi Use: Designed to protect water linesduring pressure surges caused by quickvalve closure...

1/2″ x 1/2″ #48 Flare Adapter Less Nut Design Features: Brass Construction Imported Print / View Specs PDF

1/2″ x 1/2″ #68 Compression X MIP Adapter (Lead-Free) Design Features:  Lead Free* Brass Construction Imported Print / View Specs PDF

1/2″ X 1/2″ #68T Tank Compression Fitting Design Features: Brass Construction Less Tube Stop Tubing Slips through Fitting Imported Print / View Specs PDF Use: For use in duplex tank bushings.

1/2″ x 1/2″ #69 Compression X MIP Elbow (Lead-Free) Design Features: Lead Free* Brass Construction Imported Print / View Specs PDF

1/2″ X 1/2″ -FIP- EZ-Bite Push-Fit

1/2″ x 1/2″ Barbed Coupling Lead-Free)

1/2″ X 1/2″ EZ-Bite Push-Fit Elbow

1/2″ X 1/2″ MIP EZ-Bite Push-Fit

1/2″ X 1/4″ #48 Flare Adapter Less Nut

1/2″ X 1/4″ #49 Flare Elbow Less Nut Design Features: Brass Construction Imported Print / View Specs PDF

1/2″ X 1/4″ Brass Vent Fitting Design Features: Brass Construction Imported Print / View Specs PDF

1/2″ X 1/8″ Brass Vent Fitting Design Features: Brass Construction Imported Print / View Specs PDF

1/2″ X 10″ Chrome-Plated 45 Degree Shower Arm Design Features: Brass Construction Chrome-Plated Imported Print / View Specs PDF

1/2″ X 12″ Chrome-Plated 90 Degree Shower Arm Design Features: Brass Construction Chrome-Plated Imported Print / View Specs PDF