Braxton Harris

1500W 120V Screw-in Element for Water Heater- Bagged “S” MODEL ELEMENTS- THREADED, 1500 WATT (HIGH DENSITY), 120 VOLT, TANK DIAMETER 11″. COMES WITH RUBBER GASKET

156' 1-1/8" ID x 1/2" Wall Seamless Rubber Pipe Insulation, 26 Per Carton 1-1/8" ID x 1/2" Wall Thickness. 6 Foot Lengths. Fits 1" CTS, 3/4" IPS. R Factor: 3.1. Flame Spread Rating & Smoke Rating: <25/50. Will Not Contribute Significantly To Fire...

16 oz Spray Bottle

16" Channel Lock Tongue and Groove Pliers (460) 16″ LENGTH. 4-1/4″ CAPACITY. 8 ADJUSTABLE SETTINGS. RIGHT ANGLE TEETH. UNDERCUT TONGUE & GROOVE. WITH COMFORT GRIPS.  

16.4 OZ. Hornet and Wasp Spray 16.4 OZ. Hornet and Wasp Spray

160 lb Gas Test Gauge Assembly w/ 3/4" FIP Connection Adapts to 3/4" MPT connection, steel casing with 2" shatterproof face and 1/4" MPT connection, 1/2" lb. increments. Brass air valve. Chrome plated body with 3/4" FPT inlet.

162' 3/4" ID x 3/4" Wall Self Seal Pipe Insulation, 27 Per Carton 3/4" ID x 3/4" Wall Thickness. 6 Foot Lengths. Fits 5/8" CTS, 1/2" IPS. R Factor: 5.3. Flame Spread Rating & Smoke Rating: 25/50. Will Not Contribute Significantly To Fire. Thermal...

18" GALVANIZED PIPE BRACKET, 20 GAUGE COMPARABLE TO HOLDRITE* 601-20  

18" Plastic Water Heater Pan Drilled w/ Fitting BOTTOM ID: 18", TOP ID: 19-1/2", 1" ADAPTER HOOK UP.

18" TOWEL BAR W/ CONCEALED SCREW - STAINLESS STEEL

18" TOWEL BAR W/ CONCEALED SCREW- CHROME PLATED CHROME PLATED ZINC DIE CAST. COMES W/ SCREW. BAR IS 5/8" SQUARE. QUICK INSTALLATION.

18" TOWEL BAR W/ EXPOSED SCREW - STAINLESS STEEL

18" Universal Thermocouple All copper with brass fittings. Adaptable to five different pilot valves. Available in five lengths. Kit includes two clips and nuts. Works with most gas furnaces and water heaters. Also fits Miller and Coleman mobile home...

18' Pipe Heating Cable / Heat Tape 126 WATTS. 120 VOLTS. UL LISTED. PREVENTS FROZEN WATER PIPES. FOR METAL OR RIGID PLASTIC PIPE. BUILT-IN AUTOMATIC THERMOSTAT AND PILOT LIGHT. USES LESS ENERGY DUE TO LOW WATTAGE. 7 WATTS PER FOOT.

180' 1-3/8" ID X 3/8" WALL SEMI-SLIT PIPE INSULATION 1-3/8" ID X 3/8" WALL THICKNESS

180' 5/8" ID x 3/4" Wall Self Seal Pipe Insulation, 30 Per Carton 5/8" ID x 3/4" Wall Thickness. 6 Foot Lengths. Fits 1/2" CTS, 3/8" IPS. R Factor: 5.3. Flame Spread Rating & Smoke Rating: 25/50. Will Not Contribute Significantly To Fire. Thermal...

186' 1-1/8" ID x 1/2" Wall Self Seal Pipe Insulation, 31 Per Carton 1-1/8" ID x 1/2" Wall Thickness. 6 Foot Lengths. Fits 1" CTS. R Factor: 3.0. Flame Spread Rating & Smoke Rating: 25/50. Will Not Contribute Significantly To Fire. Thermal Conductivity ...

186' 1-1/8" ID X 1/2" WALL SEMI-SLIT PIPE INSULATION 1/2" WALL THICKNESS

19-1/2" x 13-3/4" solid black lid for #JWMB LID ONLY. FOR COMPLETE LID & BODY ORDER BHC # JWMB.  

1lb Phosphorus/ Copper Easy Brazing Rod .050 x 1/8″ thick x 28″ length. Brazing range: 1350 to 1500 degrees Fahrenheit, Liquid: 1460 Fahrenheit. Solid:1310 degrees Fahrenheit. Self fluxing. Tensile strength: 91,000psi. Specifications...

1lb Self Cleaning Flux Paste Water soluble. Meets ASTM-B813. All weather formula. Cleans as it solders. Non-toxic, non-acid, lead free. Contains no zinc chloride. Use with all lead free and common soft solder. Meets Mil. Spec F-4995 Type 11.

1lb Tube 5% Silver Solder (28 Sticks) Contains 5% Silver, 6% Phosphorus and the remainder is Copper. Similar to 15% silphos with the ability to fill gaps and form fillets without adversely affecting strength. Meets AWS BCuP-3 and recommended brazing...

2 oz Heat-Proof Grease MAKES HARD TURNING FAUCETS WORK SMOOTHLY. LUBRICATES STEMS OF FAUCETS, VALVES, ETC. WATERPROOF. WILL NOT MELT LIKE ORDINARY GREASE. FOR HOT WATER OR STEM.

2 Oz. Tube- Pipe Joint Compound FOR SEALING AND LUBRICATING THREADED PIPE JOINTS. IN SMOOTH PASTE FORM. FOR STEAM, WATER, AIR AND NATURAL GAS. DOES NOT CONTAIN LEAD. WIPES CLEAN FROM HANDS. NOT FOR USE ON OXYGEN LINES. BRUSH IN CAN.  

2" (C X C X C) Wrot Tee 2" Copper Sweat X 2" Copper Sweat X 2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (C X FPT) Wrot Female Adapter 2" Copper Sweat X 2" Female pipe threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (C X MPT) Cast Male Adapter 2" (C X MPT) Cast Male Adapter - 2" Copper sweat x 2" male pipe threads - Cast brass pressure fitting

2" (C X MPT) Wrot Male Adapter 2" Copper Sweat X 2" Male Pipe Threads "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (CXC) Wrot 45 Degree Elbow 2" Copper Sweat X 2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (CXC) Wrot 90 Degree Long Turn Elbow 2" Copper Sweat X 2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (CXC) Wrot Copper 90 Degree Elbow 2" Copper Sweat X 2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (CXC) Wrot Coupling Less Tube Stop 2" Copper Sweat X 2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ UL Listed

2" (CXC) Wrot Coupling w/ Dimpled Tube Stop 2" Copper Sweat X 2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (CXC) Wrot Coupling w/ Rolled Tube Stop 2" Copper Sweat X 2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (FTG X C) Wrot 45 Degree Street Elbow 2" Fitting X 2"Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (FTG X C) Wrot 90 Degree Street Elbow 2" Fitting X 2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

2" (FTG X FPT) WROT FITTING FEMALE ADAPTER 2″ FITTING X 2″ FEMALE PIPE THREADS. WROT COPPER.  

2" (FTG X MPT) WROT FITTING MALE ADAPTER 2″ FITTING X 2″ MALE PIPE THREADS. WROT COPPER.  

2" Aluminum Roof Flashing FITS 2" PIPE. HEIGHT OF BOOT: 2-1/2". FLANGE SIZE: 8-3/4" X 12-1/2". COMPLETELY WATERPROOF AND LEAKPROOF. WILL NOT CRACK, CHIP OR PEEL. ADJUSTABLE TO MOST PITCHED ROOFS. UPC, BOCA & SBCCI APPROVED.

2" Bolt Type Light Duty Clevis Hanger for Iron Pipe (plain finish) Fits 2" Iron Pipe "“ Maximum Load: 600 LBS "“ UL LIisted. FM approved "“ Meets federal specifications: WW-H-171 (Type 1), MSS-SP-69 (Type 1) "“ Plain finish