Braxton Harris

1/2" (FTG Xx C) Wrot 90 Degree Street Elbow 1/2" Fitting X 1/2" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

1/2" (FTG) Wrot Fitting Plug 1/2" Fitting "“ Wrot Copper

1/2" - 13 TPI Plain Finished Hex Nut 1/2" INSIDE DIAMETER. 13 THREADS PER INCH. PLAIN FINISH.

1/2" - 13 TPI Zinc Plated Finished Hex Nut 1/2" INSIDE DIAMETER. 13 THREADS PER INCH. ZINC PLATED FINISH.

1/2" Barb Nylon Hose Splicer

1/2" Barb X 1/2" Barb Nylon Elbow

1/2" Barb X 1/2" Barb X 1/2" Barb Nylon Hose Tee

1/2" BARB X 1/2" FEMALE SWIVEL BRASS ADAPTER 1/2" BARB (HOSE ID) X 1/2" FEMALE PIPE THREADS

1/2" BARB X 1/2" FPT BRASS HOSE BARB ADAPTER 1/2" BARB (HOSE ID) X 1/2" FEMALE PIPE THREADS

1/2" BARB X 1/2" MPT BRASS ELBOW

1/2" Barb x 1/2" MPT Brass Hose Barb Adapter 1/2" BARB (HOSE ID) X 1/2" MALE PIPE THREADS

1/2" BARB X 1/4" FPT BRASS ELBOW

1/2" BARB X 1/4" FPT BRASS HOSE BARB ADAPTER 1/’2" BARB (HOSE ID) X 1/4" FEMALE PIPE THREADS

1/2" Barb x 3/4" MHT Hose Barb ALL BRASS. 1/2″ HOSE BARB X 3/4″ MALE GARDEN HOSE THREAD  

1/2" Barb x 3/4" MPT Brass Hose Barb Adapter 1/2" BARB (HOSE ID) X 3/4" MALE PIPE THREADS

1/2" BARB X 3/8" FPT BRASS HOSE BARB ADAPTER 1/2" BARB (HOSE ID) X 3/8" FEMALE PIPE THREADS

1/2" BARB X 3/8" MPT BRASS ELBOW

1/2" Barb x 3/8" MPT Brass Hose Barb Adapter 1/2" BARB (HOSE ID) X 3/8" MALE PIPE THREADS

1/2" BEVELED FAUCET BIBB WASHER TRADE SIZE 1/2″. ACTUAL OD 3/4″  

1/2" Bolt Type Light Duty Clevis Hanger for Iron Pipe (plain finish) Fits 1/2" Iron Pipe "“ Maximum Load: 600 LBS "“ UL LIisted. FM approved "“ Meets federal specifications: WW-H-171 (Type 1), MSS-SP-69 (Type 1) "“ Plain finish

1/2" Circular Tubing Cutter  

1/2" Closet Flange Extension Kit w/ Gasket INCLUDES: 1PC- 1/2 FLANGE EXTENSION, 1 PAIR 3-1/2" BOLTS/ NUTS/WASHERS AND FOUR WOOD SCREWS. THIS EXTENSION KIT IS USED FOR REPLACING, REPAIRING OR RETILING BATHROOM FLOOR.

1/2" Closet Flange Extension Less Gasket 1/2″ thick flange. This extension is used to bring closet flange to floor height when tiling or repairing bathroom floors. Installation is simple. 1) Clean old flange 2) Place a bead of sealant on original...

1/2" Closet Flange Extension w/ Gasket 1/2″ thick flange comes with gasket. This extension is used for replacing, repairing, retiling bathroom floor. Installation is simple: 1) Clean old flange 2) Replace bolts 3) Must use wax from old wax ring to...

1/2" CPVC Ball Valve- Solvent Weld FITS 1/2″ SCHEDULE 40. CPVC CONSTRUCTION. FOR USE ON BOTH HOT AND COLD WATER LINES. FOR USE ON CPVC PIPE. QUARTER TURN OPERATION. RATED @ 100 PSI @ 160 DEGREES FAHRENHEIT. TEFLON SEATS. SOLVENT ENDS COMPLY WITH...

1/2" CPVC Washing Box w/ Qtr Turn Arrester Valves- Center Drain- Lead Free Fits 1/2" cpvc. Complete kit includes: 2pcs 1/4" Turn brass valve (1/2" cpvc inlet x 3/4" hose thread outlet) w/ box (molded drain adapters, 2pcs molded mounting L-brackets, 1pc...

1/2" CPVC Washing Box w/ Qtr Turn Arrester Valves- Unassembled- Lead Free Fits 1/2" cpvc. Right, center and left drain configurations. Top mount valve option.Complete kit includes: 2pcs 1/4" Turn brass valve (1/2" cpvc inlet x 3/4" hose thread outlet)...

1/2" CPVC Washing Box w/ Qtr Turn Valves- Center Drain- Lead Free Fits 1/2" cpvc. Complete kit includes: 2pcs 1/4" Turn brass valve (1/2" cpvc inlet x 3/4" hose thread outlet) w/ box (molded drain adapters, 2pcs molded mounting L-brackets, 1pc sturdy...

1/2" CPVC WATER HAMMER ARRESTER. AA MINI SIZE. - LEAD FREE CAN BE INSTALLED IN ANY DIRECTION. ABSORBS HAMMER CAUSED BY QUICK CLOSING VALVES. 250 DEGREES (F) MAXIMUM WORKING TEMPERATURE. 300 PSI MAXIMUM WORKING PRESSURE.

1/2" CPVC x 1/4" OD Ice Maker Box w/ Qtr Turn Arrester Valve- Lead Free Box dimensions: 5-1/8"W x 5-1/8"H x 3-1/4"D. Face plate dimensions: 6-3/4"W x 6-3/4"H. NSF 61. QAI Complies w/ Universal Plumbing Code. ASME A112.18.1

1/2" CPVC x 1/4" OD Ice Maker Box w/ Qtr Turn Valve- Lead Free Box dimensions: 5-1/8"W x 5-1/8"H x 3-1/4"D. Face plate dimensions: 6-3/4"W x 6-3/4"H. NSF 61. QAI Complies w/ Universal Plumbing Code. ASME A112.18.1

1/2" CPVC x 3/8" OD Qtr Turn Angle Stop- Lead Free 1/2″ CPVC inlet X 3/8″ OD compression outlet angle valve. quarter turn operation. Meets these codes:Uniform Plumbing Code, National Plumbing Code of Canada. Meets these standards: ASME A112...

1/2" Crimping Tool for Pex 1/2″ crimping tool for Pex and Polybutylene. Tool can be calibrated in the field. For ASTM F1807 pex systems.. Comes with go/no-go gauge. Made in USA.  

1/2" CTS (3/8" IPS) Bronze Compression Coupling- Lead Free 1/2" Copper Tube Size, 3/8" Iron Pipe Size, 3" Length, Maximum Pressure: 125 PSI, Maximum Temperature: 140 Degrees Fahrenheit . All compression coupling must be restrained on ends.

1/2" CTS (3/8"ips)Long Brass Compression Coupling- Lead Free 1/2″ COPPER TUBE SIZE, 3/8″ IRON PIPE SIZE, 5″ LENGTH, MAXIMUM PRESSURE: 125 PSI, MAXIMUM TEMPERATURE: 140 DEGREES FAHRENHEIT. ALL COMPRESSION COUPLING MUST BE RESTRAINED ON...

1/2" CTS (5/8" OD) CPVC Compression Coupling 1/2″ COPPER TUBE SIZE. 3-3/4″ LENGTH. MAXIMUM PRESSURE: 125 PSI. SUITABLE FOR HOT WATER. MUST BE RESTRAINED ON BOTH ENDS.

1/2" cts 16 ga Copper Plated Support Bracket (#101-18) 1-1/4" width x 20" length. 16 gauge thickness. Can be nailed or screwed to metal/wood stud

1/2" CTS 2-Hole Insulating Suspension Clamp 1/2" Copper Tube Size Fits Copper, CPVC, and Polybutylene

1/2" CTS 2-Hole Pipe Clamp 1/2" Copper Tube Size. Fits copper, CPVC, and polybutylene.

1/2" CTS BRASS STOP VALVE- SOLDER 1/2″ X 1/2″ COPPER TUBE SIZE. FOR USE WITH AIR, OIL OR WATER. NEOPRENE SEAL WASHER. HEAVY CAST IRON HANDLE. MOSTLY USED WHERE VALVE WILL BE OPENED AND CLOSED FREQUENTLY OR TO REGULATE FLOW.