Braxton Harris

6" STRAINER FOR HUB OPENINGS IN SOIL PIPE 6-7/8" DIAMETER

6" Wrot Cap 6" Copper Sweat "“ Wrot Copper

6" x 10" Extension Cleanout Cover Set 6″ IPS COUNTERSUNK BRASS PLUG DRILLED AND TAPPED FOR 1/4″ – 20 BOLT. 10″ 24 GAUGE STAINLESS STEEL WALL ACCESS COVER. FURNISHED WITH 1/4″-20 X 4″ FLAT HEAD MACHINE SCREW. MINIMUM/...

6" X 3" (C X C) Wrot Reducer Coupling 2" Copper Sweat X 1" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

6" x 4" Flexible Transition Coupling Complies with ASTM C1173-2002, CSA B602-2005, UPC approved. Fits plastic, cast iron, copper and lead in any combination. All stainless steel clamps. Internal sealing beads for absolutely leak free operation and...

6" x 6" Flexible Transition Coupling Complies with ASTM C1173-2002, CSA B602-2005, UPC approved. Fits plastic, cast iron, copper and lead in any combination. All stainless steel clamps. Internal sealing beads for absolutely leak free operation and...

6" x 6" Valve Seat Wrench w/ Angle Step Pattern Hardened Steel for easy removal and Installation of faucet seats.  

6" X 6" Valve Seat Wrench w/ Angle Tapered Pattern HARDENED STEEL. FOR EASY REMOVAL AND INSTALLATION OF FAUCET SEATS.  

6" x 6" w/ 1-1/2" x 2" Outlet PVC Bell Trap Drain w/ Snap-in Lid (strainer) Molded bell snap-in lid. 6″x6″ top grate. Use 2″ coupling to convert to 2″ outlet.  

6" x 8" Extension Cleanout Cover Set 6″ IPS COUNTERSUNK BRASS PLUG DRILLED AND TAPPED FOR 1/4″ – 20 BOLT. 8″ 24 GAUGE STAINLESS STEEL WALL ACCESS COVER. FURNISHED WITH 1/4″-20 X 4″ FLAT HEAD MACHINE SCREW. MINIMUM/...

6" x 9" Plastic Snap-in Access Panel Made of durable white ABS. Panel snaps into frame. Corners on back side have pivot holes for drilling when more secure anchoring is necessary. Save on costly sheetrock repairs by providing future access now. Provides...

6"-11" OD Corrugated Roof Flashing Fits pipes 6″ (152mm) to 11″ (729mm) OD. Base diameter 14-1/2″ (368mm). Height 6″. Made of virgin gray EPDM rubber with continuous service range of -65 degrees F to 250 degrees F. Aluminum round...

6' (72") S.S. Braided Ice Maker Connector- Lead Free 1/4″ O.D. Female Compression x 1/4″ O.D. Female Compression x 6′ (72″) length. Fits all standard ice makers. Includes nickel plated brass ends.

6' Garbage Disposal Angled Pigtail Cord 16/3 SPT-3 wire. 13 Amps @ 125 VOLTS. UL Listed for gabage disposals, motors, tools & appliances

6' Garbage Disposal Straight Pigtail Cord 16/3 SPT-3 wire with ground. 13 amps @ 125 volts. UL listed for garbage disposal, motors, tools and appliances.

6' Pipe Heating Cable / Heat TapeFor use with Kennedy Series Workbench (see related items tab).Drawers - many additional sizes available. Rolling Drawers - many additional combinations available. Power Strips - many additional combinations available...

6' S.S. Washing Machine Inlet Hose w/ 3/4" FHT 90 Degree Elbow- Bagged 6′ length 304 grade stainless steel braided connector. 800 PSI leak point. 3/8″ ID hose with 3/4″ FHT (Female Hose Thread) connections. For hot and cold water use...

6' S.S. Washing Machine Inlet Hose w/ 3/4" FHT Connections- Bagged 6′ length 304 grade stainless steel braided connectors with 3/4″ female hose thread connections. 1000 PSI leak point. 3/8″ ID hose with 3/4″ FHT (Female Hose...

6' S.S. Washing Machine Inlet Hose w/ 3/4" FHT Connections-- Bulk 6′ length 304 grade stainless steel braided connectors with 3/4″ female hose thread connections. 1000 PSI leak point. 3/8″ ID hose with 3/4″ FHT (Female Hose...

6' X 1" OD "L" BAR CURTAIN ROD POLISHED ALUMINUM. 2PCS- 48″ WIDE X 6′ LONG  

6' X 1" OD SHOWER ROD POLISHED ALUMINUM

6' x 1" OD Shower Rod w/ 1" Round Flange and Screws 1" outside diameter x 6' length aluminum shower rod with 2pcs round chrome plated steel flanges with 8pcs exposed screws.

6' x 50' PVC Shower Pan Liner 40 MIL THICK. 300 SQ FEET. 90 LBS. MEETS ASTM D-4551

6' x 9' Cotton Canvas Drop Cloth (8 oz)

6-1/8" OD Cast Strainer w/ 4-7/8" Screw Holes- Nickel Bronze

6-way Heavy Duty Screwdriver Display (24pcs) 24 PACK DISPLAY CARTON. DURABLE BITS: 2 SLOTTED AND 2 PHILLIPS. SHAFT ENDS ARE1/4? & 3/16? HEX SIZES FOR USE AS NUT DRIVERS. 7-1/2? LENGTH.

6-way screwdrive/ nut drive 12-pack. Carton-priced per each Priced per screwdriver in display.

6-WAY SCREWDRIVER SLOTTED REPLACEMENT BIT  

60 lb Gas Test Gauge Assembly w/ 1" FIP Connection Steel casing with 2" shatterproof face and 1/4" MPT connection, 1/2" lb. increments. Brass air valve. Chrome plated body with 1" FPT inlet.

60 lb Gas Test Gauge Assembly w/ 3/4" FIP Connection Adapts to 3/4" MPT connection, steel casing with 2" shatterproof face and 1/4" MPT connection, 1/2" lb. increments. Brass air valve. Chrome plated body with 3/4" FPT inlet.

60' 1-5/8" ID x 1" Wall Self Seal Pipe Insulation, 10 Per Carton 1-5/8" ID x 1" Wall Thickness. 6 Foot Lengths. Fits 1-1/2" CTS, 1-1/4" IPS. R Factor: 6.9. Flame Spread Rating & Smoke Rating: 25/50. Will Not Contribute Significantly To Fire. Thermal...

60lb Mega No Hub Torque Wrench (5/16" socket) Slide down rocking reversing feature. Heavy duty build with chrome vanadium sockets. 60lb rated with 5/16″ socket.  

65" Brass Riser For AAS & AASDSR

66' 1-7/8" ID x 3/4" Wall Self Seal Pipe Insulation, 11 Per Carton 1-7/8" ID x 3/4" Wall Thickness. 6 Foot Lengths. Fits 1-1/2" IPS. R Factor: 4.8. Flame Spread Rating & Smoke Rating: 25/50. Will Not Contribute Significantly To Fire. Thermal...

66' 2-5/8" ID X 1/2" WALL SEMI-SLIT PIPE INSULATION 1/2" WALL THICKNESS

7" Channel Lock Tongue and Groove Pliers (426) RIGHT ANGLE TEETH. UNDERCUT TONGUE & GROOVE. WITH COMFORT GRIPS.  

7" Diameter 16 Gauge Stainless Steel Extension Cover 7" outside diameter 16 gauge stainless steel with beveled edge. Made to be used on floors or walls. 1500 degree Fahrenheit fire rating.

7" Diameter 24 Gauge Stainless Steel Extension Cover w/ 1/4" x 4" Length Bolt 7″ DIAMETER WALL ACCESS COVER WITH CHROME PLATED BOLT. BOLT HAS 1/4″ THREADS X 4″ LENGTH.

7" Griplock* Tongue and Groove Water Pump Pliers (GL6) 1″ CAPACITY  

7" Length (1/2cts) Long Tub Spout with Slip Connection Zinc die cast. 1/2" copper slip connection. 2-3/4" minimum nipple length from wall. 4-1/4" maximum nipple length from wall. 2-7/16" OD of spout at wall. Width at nose of spout is 1-7/8".