Braxton Harris

48' 3-5/8" ID X 1/2" WALL SEMI-SLIT PIPE INSULATION 1/2" WALL THICKNESS

5 Gallon Bucket Caddy w/ Five Trays

5 lb 4" Face Gas Test Gauge Assembly w/ 3/4" FIP Connection Adapts to 3/4" MIP connection, 4" face and pressure snubber. Gauge has 1/4" MIP connection to body, 5lb increments. Regulates air to even flow. The diaphragm is protected from compressed air...

5 lb Gas Test Gauge Assembly w/ 3/4" FIP Connection Adapts to 3/4" MPT connection, steel casing with 2" shatterproof face and 1/4" MPT connection, 1/10" lb. increments. Brass air valve. Chrome plated body with 3/4" FPT inlet.

5 lb Lead Ingot One 5 lb plug.

5" (C X C X C) Wrot Tee 5" Copper Sweat X 5" Copper Sweat X 5" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

5" (CXC) Wrot 45 Degree Elbow 5" Copper SweatX 5" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

5" (CXC) Wrot Copper 90 Degree Elbow 5" Copper Sweat X 5" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

5" (CXC) Wrot Coupling Less Tube Stop 5" Copper Sweat X 5" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ UL Listed

5" (CXC) Wrot Coupling w/ Dimpled Tube Stop 5" Copper Sweat X 5" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

5" (CXC) Wrot Coupling w/ Rolled Tube Stop 5" Copper Sweat X 5" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

5" 4" Cast Iron Cleanout w/ 4" Raised Head Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 5″ PIPE SIZE. 4″ RAISED HEAD SOUTHERN CODE PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

5" Cast Iron Cleanout w/ 4" Countersunk Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 5″ PIPE SIZE. 4″ COUNTERSUNK SOUTHERN CODE PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

5" Cast Iron Cleanout w/ 4" Heavy Countersunk Brass Plug STANDARD BODY CLEANOUT (PLAIN END). FITS 5″ PIPE SIZE. 4″ COUNTERSUNK HEAVY PATTERN PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

5" CAST IRON CLEANOUT W/ 4" HEAVY R.H. BRASS PLUG STANDARD BODY CLEANOUT (PLAIN END). FITS 5″ PIPE SIZE. 4″ RAISED HEAD HEAVY PATTERN PLUG SIZE. FOR SERVICE WEIGHT OR NO-HUB.

5" Cast Iron Tapped Screw Ferrule w/ 4" Tapping Size Fits 5″ pipe size. 4″ tapping size. Long pattern with 3-1/2″ height. Plain end. Standard weight. Does not come with a plug. Meets ASTM A-74. Made of HT200 cast iron.  

5" Cast Iron Wing Nut Test Plug - Straight STRAIGHT PATTERN. CAST IRON. FITS INSIDE 5″ PIPE. UNEXPANDED OUTER DIMENSION IS 4-1/2″.  

5" Cleanout and Drain Ring- Chrome Plated Fits 5" diameter drains and cleanout spuds and 3"x4" general purpose drains. Includes screws.

5" Cleanout and Drain Ring- Nickel Bronze Fits 5" diameter drains and cleanout spuds and 3"x4" general purpose drains. Includes screws.

5" Cleanout Cover (Cast)- Brushed Brass Fits 5" diameter drains and cleanout spuds and 3"x4" general purpose drains. Includes screws.

5" Cleanout Cover (Cast)- Nickel Bronze Fits 5" diameter drains and cleanout spuds and 3"x4" general purpose drains. Includes screws.

5" Diameter 16 Gauge Stainless Steel Extension Cover 5" outside diameter 16 gauge stainless steel with beveled edge. Made to be used on floors or walls. 1500 degree Fahrenheit fire rating.

5" Diameter 16 Gauge Stainless Steel Extension Cover w/ 1/4" x 4" Length Bolt 5″ outside diameter 16 gauge stainless steel with beveled edge. Made to be used on floors or walls. 1500 degree Fahrenheit fire rating. Chrome plated bolt is 1/4″...

5" Diameter 24 Gauge Stainless Steel Extension Cover w/ 1/4" x 4" Length Bolt 5″ outside diameter 16 gauge stainless steel with beveled edge. Made to be used on floors or walls. 1500 degree Fahrenheit fire rating. Chrome plated bolt is 1/4″...

5" Dual-Tite Gasket Service Weight (Meets ASTM Standard C564) Service weight gasket.

5" Extension Cover Brass Plug (1/4" tapped) 5″ IPS COUNTERSUNK BRASS PLUG DRILLED AND TAPPED IN CENTER FOR 1/4″ – 20 BOLT.

5" Flat Sunction Sink Stopper HELD IN PLACE BY NATURAL SUCTION OF THE DRAIN. TAB MAKES IT EASY TO REMOVE.  

5" Heavy Plastic Test Plug with Metal Bolt and Wing Nut WITH METAL BOLT AND WING NUT. HEAVY PLASTIC FLANGES WITH MOLDED RUBBER GASKETS. FITS BOTH CAST IRON AND PVC PIPE.

5" IPS C.P. Flexible Floor and Ceiling Plate 5" iron pipe size. Non-corrosive. 100% rust proof. One piece split chrome plated Polypropylene. 8.531" OD.

5" IPS Flange Connection Kit w/ Asbestos Free Full Face Gasket FITS 5" IRON PIPE. BOLT SIZE: 3/4" DIAMETER X 3-1/4" LENGTH. KIT INCLUDES: 8 BOLTS, 8 NUTS, 1 ASBESTOS FREE FULL FACE GASKET. HEX BOLTS AND NUTS MEET ASTM A307. GASKETS MEET ASTM F152, F36A,...

5" IPS Flange Connection Kit w/ Asbestos Free Gasket FITS 5" IRON PIPE. BOLT SIZE: 3/4" DIAMETER X 3-1/4" LENGTH. KIT INCLUDES: 8 BOLTS, 8 NUTS, 1 ASBESTOS FREE RING GASKET. HEX BOLTS AND NUTS MEET ASTM A307. GASKET MEETS ASTM F152, F36A, F146. 150 LBS...

5" IPS Flange Connection Kit w/ Asbestos Free Gasket/ Zinc Plated Bolts

5" IPS Flange Connection Kit w/ Full Face Rubber Gasket FITS 5" IRON PIPE. BOLT SIZE: 3/4" DIAMETER X 3-1/4" LENGTH. KIT INCLUDES: 8 BOLTS, 8 NUTS, 1 RED RUBBER FULL FACE GASKET. HEX BOLTS AND NUTS MEET ASTM A307. RUBBER GASKETS MEET ASTM D1330. 150 LBS...

5" IPS Flange Connection Kit w/ Red Rubber Gasket FITS 5" IRON PIPE. BOLT SIZE: 3/4" DIAMETER X 3-1/4" LENGTH. KIT INCLUDES: 8 BOLTS, 8 NUTS, 1 RED RUBBER GASKET. HEX BOLTS AND NUTS MEET ASTM A307. RUBBER GASKETS MEET ASTM D1330. 150 LBS. DO NOT USE FOR...

5" IPS NEW ORLEANS RAISED BRASS CLEANOUT PLUG 5" IRON PIPE SIZE. NEW ORLEANS CODE CLEANOUT. RAISED HEAD.

5" IPS Ohio (Heavy) Countersunk Brass Cleanout Plug 5" IPS Ohio (Heavy) Countersunk Brass Cleanout Plug

5" IPS OHIO RAISED HEAD BRASS CLEANOUT PLUG 5" IRON PIPE SIZE. OHIO, NEW YORK & RICHMOND CODE. RAISED HEAD. HEAVY PATTERN.

5" LEAD FIT-ALL PLUG FITS 5″ PIPE. CAST IRON CORE.

5" OD 24 Gauge Stainless Steel Extension Cover 5″ outside diameter. Cleanout access wall cover.

5" Plastic Arm Tank Lever for American Standard (#73392-02) FITS BRIGGS, AMERICAN STANDARD, & ELJER 1 PC. TOILETS; 5″ PLASTIC ARM WITH MOLDED SPUD & NUT; USE WITH BEADED OR LINK CHAIN; FOR #3156 FLUSH VALVE