Braxton Harris

5" Square Cast Brass Screw-in Strainer w/ Metal Spud Made of Nickel Bronze  

5" x 18" 16 Gauge Protective Plate (Boca Plate) Galvanized steel. 5" width. 18" length. Protects pipe during installation.

5" x 8" Extension Cleanout Cover Set 5″ IPS COUNTERSUNK BRASS PLUG DRILLED AND TAPPED FOR 1/4″ – 20 BOLT. 8″ 24 GAUGE STAINLESS STEEL WALL ACCESS COVER. FURNISHED WITH 1/4″-20 X 4″ FLAT HEAD MACHINE SCREW. MINIMUM/...

5" x 8" Self Nailing Stud Protector (Guard) 16 Gauge (Boca Plate) GALVANIZED STEEL. 5" WIDTH. 8" LENGTH. PROTECTS PIPE DURING INSTALLATION. COMES WITH FOUR HOLES AND TWO SELF NAILING TEETH.

5"-8" Inflatable Water/ Air Test Plug FITS 5″, 6″AND 8″ PIPES. FOR PRESSURE TESTING DRAIN LINES. USER SAFE: PRE-SET PRESSURE RELIEF VALVE PREVENTS OVER-INFLATION. HOLDING POWER: MULTI-RIBBED BODY CREATES TIGHT EFFECTIVE SEAL. VERSATILE...

5"-9" OD Corrugated Roof Flashing Fits pipes 5″ (127mm) to 9″ (228mm) OD. Base diameter 10-1/2″ (266mm). Height 6″. Made of virgin gray EPDM rubber with continuous service range of -65 degrees F to 250 degrees F. Aluminum round...

5"x18" 16 Ga Galvanized Steel FHA Strap (6 Offset Hole Pattern)

5' (60") S.S. Flexible Ice Maker Connector- Lead Free 1/4″ O.D. Female Compression x 1/4″ O.D. Female Compression x 5′ (60″) length. Fits all standard ice makers. Includes nickel plated brass ends.

5' Aluminum Shower Rod w/ 1" Metal Adjustable Rod Holder 1" OUTSIDE DIAMETER X 5' LENGTH ALUMINUM SHOWER ROD WITH METAL ADJUSTABLE ROD HOLDERS.

5' Aluminum Shower Rod w/ 1" Plastic Adjustable Rod Holder 1" OUTSIDE DIAMETER X 5' LENGTH ALUMINUM SHOWER ROD WITH PLASTIC ADJUSTABLE ROD HOLDERS.

5' Aluminum Shower Rod w/ 1" Plastic Adjustable Rod Holder (Mini pack) 1" OUTSIDE DIAMETER X 5' LENGTH ALUMINUM SHOWER ROD WITH PLASTIC ADJUSTABLE ROD HOLDERS.

5' S.S. Washing Machine Inlet Hose w/ 3/4" FHT Connections- Bagged 5′ length 304 grade stainless steel braided connectors with 3/4″ female hose thread connections. 1000 PSI leak point. 3/8″ ID hose with 3/4″ FHT (Female Hose...

5' S.S. Washing Machine Inlet Hose w/ 3/4" FHT Connections- Bulk 5′ length 304 grade stainless steel braided connectors with 3/4″ female hose thread connections. 1000 PSI leak point. 3/8″ ID hose with 3/4″ FHT (Female Hose Thread)...

5' Steel Probing Rod Welded-steel construction. 24″ Tee handle. 1/2″ steel. 60″ length.  

5' Utility Sink Hose 5′ LENGTH. 5/6″ HOSE. 3/4″ FEMALE HOSE THREAD ON ONE END.  

5' Washing Machine Fit-all Hook Hose 5′ Length Grey Hose. THREE SIZE (3/4″, 7/8″, 1″) Step Down Drain Outlet  

5' x 1" OD "D" Bar Curtain Rod w/ 24" Ceiling Support and Flange POLISHED ALUMINUM. 4PCS. 26″ WIDE X 5′ LONG  

5' x 1" OD "L" Bar Curtain Rod (26"Wx60"L)w/ Support and Flange- POLISHED ALUMINUM. 2PCS- 26″ WIDE X 5′ LONG  

5' x 1" OD Aluminum Shower Rod POLISHED ALUMINUM

5' x 1" OD Aluminum Shower Rod Polished Aluminum. Less Flanges and Screws

5' x 1" OD Aluminum Shower Rod w/ 1" Round Flange and Screws 1" OUTSIDE DIAMETER X 5' LENGTH ALUMINUM SHOWER ROD WITH METAL FIXED ROD HOLDERS. COMES WITH MOUNTING SCREWS

5' x 40' PVC Shower Pan Liner 40 MIL THICK. 200 SQ FEET. 60 LBS. MEETS ASTM D-4551

5-1/16" x 3" Log Lighter Key (Cast Brass)

5-1/2" Lower Lift Wire Brass Brass

5-1/4" OD Bell Cleanout Cover Plate- Matte Chrome Finish 5-1/4″ OUTSIDE DIMENSIONS. BELL DESIGN USED WHEN CLEANOUT FITTING IS NOT RECESSED INTO WALL. BELL IS 1-1/4″ DEEP. CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH...

5-1/4" OD Flat Cleanout Cover Plate- Matte Chrome Finish 5-1/4″ OUTSIDE DIMENSIONS. FLAT DESIGN HIDES CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14 WOOD SCREW.  

5.5 oz White Boss Siliconized Acrylic Latex Tub/Tile Caulk BONDS AND SEALS

5/16" (CXC) Wrot 90 Degree Long Turn Elbow 5/16" Copper Sweat X 5/16" Copper Sweat "“ Wrot Copper "“ IAPMO Approved "“ NSF Approved

5/16" - 18 TPI Plain Finished Hex Nut 5/16" INSIDE DIAMETER. 18 THREADS PER INCH. PLAIN FINISH.

5/16" - 24 THREADS STOP & WASTE DRAIN CAP REPLACEMENT CAP FOR STOP & WASTE VALVES. INCLUDES RUBBER GASKET.

5/16" BARB X 1/4" FPT BRASS HOSE BARB ADAPTER 5/16" BARB (HOSE ID) X 1/4" FEMALE PIPE THREADS

5/16" Barb x 1/4" MPT Brass Hose Barb Adapter 5/16" BARB (HOSE ID) X 1/4" MALE PIPE THREADS

5/16" BARB X 1/8" FPT BRASS HOSE BARB ADAPTER 5/16" BARB (HOSE ID) X 1/8" FEMALE PIPE THREADS

5/16" BARB X 1/8" MPT BRASS HOSE BARB ADAPTER 5/16" BARB (HOSE ID)X 1/8" MALE PIPE THREADS

5/16" BARB X 3/8" MPT BRASS HOSE BARB ADAPTER 5/16" BARB (HOSE ID) X 3/8" MALE PIPE THREADS

5/16" Brass Hex Nut

5/16" Closed Hex Nickel Plated Acorn Cap Nut 5/16" X 9/16"

5/16" Flare Brass Forged Short Nut 5/16" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...

5/16" Flare Brass Short Nut (style 41S) 5/16" flare threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...

5/16" Flare Brass Tee 5/16" X 5/16" X 5/16" FLARE THREADS. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and natural...