Specialties

12" W x 15"L xc7"D Cardboard Tub Box- Not Waxed Used for rough-ins. Saves time on bathtub installations in concrete floors.  

1-1/2" TRAP AIR VENT

Bar Sink Waste Socket Drain - Cast Brass 3-1/4″ LONG, 1-7/8″ FLANGE, 1″ MIP CONNECTION. SOLID BRASS PARTS. ROUGH BRASS FINISH.  

Kitchen Sink Spray- Black BLACK HANDLE W/ CHROME ACCENTS  

SERVICE SINK FAUCET COMPLETE WITH ALL MOUNTING HARDWARE 8″ CENTER TO CENTER, CHROME PLATED HEAVY PATTERN WITH CROSS HANDLES  

S.S. Spin Seal Basket Strainer 304 GRADE STAINLESS STEEL BASKET & CUP. FITS SINKS UP TO 1″ THICK.  

4" Sewer Relief Valve Cleanout Releases waste to outside of buildings in the event of sewer line blockage, preventing costly damage due to sewage backflow or overflow. Applicable in residential, commercial, or industrial settings- any structure connected...

3-1/2" Sewer Relief Valve DESIGNED FOR USE IN OUTSIDE CLEANOUTS TO ELIMINATE COSTLY DAMAGE DUE TO SEWAGE BACK-UP. FITS 3-1/2″ CAST IRON OR PLASTIC PIPES. PROVIDES A VISIBLE WARNING THAT SEWAGE IS BACKING UP. SPRING LOADED TO AUTOMATICALLY CLOSE,...

3" Sewer Relief Valve DESIGNED FOR USE IN OUTSIDE CLEANOUTS TO ELIMINATE COSTLY DAMAGE DUE TO SEWAGE BACK-UP. FITS 3″ CAST IRON OR PLASTIC PIPES. PROVIDES A VISIBLE WARNING THAT SEWAGE IS BACKING UP. SPRING LOADED TO AUTOMATICALLY CLOSE, PREVENTING...

2" Sewer Relief Valve

1-1/2" Sewer Relief Valve DESIGNED FOR USE IN OUTSIDE CLEANOUTS TO ELIMINATE COSTLY DAMAGE DUE TO SEWAGE BACK-UP. FITS 1-1/2″ CAST IRON OR PLASTIC PIPES. PROVIDES A VISIBLE WARNING THAT SEWAGE IS BACKING UP. SPRING LOADED TO AUTOMATICALLY CLOSE,...

Pop-up Sewer Relief Valve for 3" or 4" PVC Pipe Automatic relief valve for sewer cleanout riser. Fits standard 3″ or 4″ cleanout connections.  

Single Offset Bath Supplies- Chrome Plated Set of 2pcs- 1/2″ OD x 22″ length supplies, 2 pcs- 1/2″ IPS nuts, 2 pcs- 3/4″ IPS nuts, 2 pcs- washers and 2pcs- bell flanges.  

Plastic Shower Holder Adapter- Chrome Plated For use with part # HHS  

COMMERCIAL SWIVEL LIQUID SOAP DISPENSER W/ EXPOSED SCREWS- CHROME PLATED

1-1/2" Split (2pc) Plastic Slip Joint Nut FITS 1-1/2″ TUBULAR. WHITE PVC. NUT CAN BE REPLACED WITHOUT REMOVING TUBULAR!!  

72" Handheld Shower Hose (1/2" FIP x 1/2" FIP) 1/2″ FIP x 1/2″ FIP threaded connections.  

10" Steel Sink Hanger - Zinc Plated Finish Universal fit 10″ center to center. One piece. Used to hang sink on wall.  

Brass Shower Diverter Valve (Button Type )- Chrome Plated SHOWER DIVERTER VALVE (BUTTON TYPE )- CHROME PLATED -CHROME PLATED BRASS.  

Shower Diverter Valve- Lever Type- Chrome Plated CHROME PLATED BRASS  

Soap Dish w/ Concealed Screws- Chrome Plated Chrome plated zinc die cast. Comes with screws/mounting hardware. Concealed mounting brackets.  

SOAP DISH W/ EXPOSED SCREWS- CHROME PLATED CHROME PLATED ZINC DIE CAST. COMES W/ SCREW.  

Self-closing Shower/ Urinal Valve w/ Cross Handle 1/2″ FIP CONNECTION. CHROME PLATED HEAVY DUTY CAST BRASS W/ CROSS HANDLE.  

1/2" FIP Self Closing Shower/ Urinal Valve 1/2″ FIP connection. Chrome plated heavy cast brass body and handle w/ pull chain. For use with outdoor showers as well as wall hung urinals.  

3-1/2" ID x 6-3/4" OD 3/4" Thick Closet Gasket w/ Bolt Holes Closed Cell Sponge Neoprene Rubber Gasket  

3/4" Thick Sponge Closet Gasket (3-1/2" I.D. x 5-3/8" O.D.) For Setting Most Floor-Mounted Toilets. Replaces Wax Ring  

3/4" Thick Sponge Closet Gasket (3-1/2" I.D. x 5-1/4" O.D.) For setting most floor mounted toilets. Used in place of wax ring.  

1/2" Thick Sponge Closet Gasket (3-1/2"ID x 5-1/4"OD) FOR SETTING MOST FLOOR-MOUNTED TOILETS  

1-1/2" Sink Crumb Cup w/ Post Made of stainless steel. 3/4″ deep. Removable.  

1-1/2" Sink Crumb Cup Less Post STAINLESS STEEL  

5/16" x 2-1/4" Snap-off Brass Closet Bolts w/ Oval Washers- Paired 2-PCS-BRASS BOLTS, 2-PCS-STAINLESS STEEL OVAL WASHERS, 2PCS-CHROME PLATED OPEN ACORN HEX NUTS  

1-1/2" Gerber Style Bath Drain w/ Strainer- Chrome Plated 1-1/2″ COARSE THREAD. FINISHED STRAINER AND SCREW.  

1/2" IPS x 8" "S" Style Shower Arm- Chrome Plated Increases height of shower head by 8″.  

1/2" IPS x 10" "S" Style Shower Arm Chrome plated brass. Increases height of shower head by 10″.  

1/2" IPS X 15" RAIN STYLE SHOWER ARM - CHROME PLATED 1/2″ IPS x 15″ LENGTH 90 DEGREE BEND ARM. WALL CONNECTION. GIVES SHOWERHEAD CONNECTION A 15″ DISTANCE FROM WALL. DROPS 5″ FROM BEND  

1/2" IPS X 6" CP PLASTIC SHOWER ARM W/ FLANGE 1/2″ IPS X 6″ CP PLASTIC SHOWER ARM W/ FLANGE  

1/2" IPS Shower Arm Flange w/ Set Screw DIE CAST CHROME PLATED.  

1/2" IPS x 8" Brass Shower Arm- Chrome Plated

1/2" IPS x 6" SS Shower Arm- Chrome Plated Made of chrome plated stainless steel. 1.45mm thickness.  

1-1/8" White Rubber Basin/Tub Stopper Hollow to increase flexibility.