Specialties

7" Length (1/2cts) Long Tub Spout with Slip Connection Zinc die cast. 1/2" copper slip connection. 2-3/4" minimum nipple length from wall. 4-1/4" maximum nipple length from wall. 2-7/16" OD of spout...

7" Length (1/2ips) Long Tub Spout with Front Diverter Zinc die cast. 1/2" IPS connection at nose end of spout. 4-1/4" maximum nipple length from wall. 2-7/16" OD of spout at wall. Width at nose of...

7/8" OD (3/4 CTS) Low Pattern Flange- Chrome Plated (3/4" NOMINAL COPPER TUBE SIZE) SURE GRIP ESCUTCHEON. CHROME PLATED. FLANGE WIDTH IS 2-1/2".

7/8" OD (3/4" CTS) Floor and Ceiling Plate (3/4" NOM. CTS) SURE GRIP. CHROME PLATED.

7/8" OD (3/4" cts/ 1/2" ips) White Flexible Floor and Ceiling Plate 1/2" iron pipe size. 3/4" nomimal copper tube size. Non-corrosive. 100% rust proof. One piece split Polypropylene. 2.787" OD.

7/8" OD (3/4" cts/1/2"ips) C.P. Flexible Floor and Ceiling Plate 1/2" iron pipe size. 3/4" copper tube size. Non-corrosive. 100% rust proof. One piece split chrome plated Polypropylene. 2.787" OD.

7/8" OD (3/4"cts) White Poly Low Pattern Flange 3/4" NOMINAL COPPER TUBE SIZE. CORROSION RESISTANT. 2-1/2" DIAMETER. IDEAL FOR PAINTED WALLS. CANNOT PIT OR RUST. WILL NOT LOOSE ORIGINAL GRIP.

7/8" OD Floor & Ceiling Plate Heavy Pattern 3/4" NOMINAL CTS. HEAVY GAUGE CHROME PLATED

8" IPS C.P. Flexible Floor and Ceiling Plate 8" iron pipe size. Non-corrosive. 100% rust proof. One piece split chrome plated Polypropylene. 13" OD.

8" IPS White Flexible Floor and Ceiling Plate 8" iron pipe size. Non-corrosive. 100% rust proof. One piece split Polypropylene. 13" OD.

8-1/2" Brass Tub Spout w/ Back Diverter- Chrome Plated SOLID BRASS. 8-1/2" SPOUT LENGTH. ONE PIECE. WILL FIT 3/4" OR 1/2" IPS.

9" Long Tub Spout w/ Nose Diverter- Chrome Plated SOLID BRASS WITH NOSE DIVERTER. 9" SPOUT LENGTH. ONE PIECE. WILL FIT 1/2" IPS.

Adjustable 6' X 1" OD Straight Shower Rod

Adjustable Plastic Curtain Rod Holder - Chrome Plated Chrome plated plastic. Fits 15/16? OD and 1? OD rods. Turn to tighten against wall. Rubber pads will not mar surface. No screws needed.

Anchor Repair Flange Kit Mounts to floor to stabilize toilet. Use w/ brass, copper, plastic and cast iron flanges. Eliminate the need to replaced broken closet flanges. Simply place under the broken...

Basin Rosette (Deep Pattern) Steel, Zinc Plated .878 ID.

Bathtub Hanger Galvanized Steel Bathtub Hanger Galvanized Steel

Closet Bend Spacer (4" H x 4" ID x 6" OD) 4" HIGH X 4" ID 6" OD

Closet Kit #1

Closet Kit #2

Combo Clip for Counters (5/8" x 1-1/2")(4 clips)

Dishwasher Air Gap w/ 5/8" ID Connection- Chrome Plated Cover Comes with chrome plated ABS cover. Keeps waste from backing up into your dishwasher. Used in conjunction with our #DDH58 5/8" ID...

Dishwasher Disposal Connector w/ 4 Clamps RUBBER SLEEVE W/ 4 CLAMPS.

Dishwasher/ Disposal Connector w/ 2 Gear Clamps Made of flexible PVC with 2 gear clamps. Makes a positive seal between drain and disposal.

Display of 1/4" x 3-1/2" Closet Bolt Set w/ Oval Washers- Paired Display of 50prs

Double (deep) Cup Basket Strainer w/ Spring Lock Basket Stainless steel deep basket and spring tension post to lock basket. Zinc nut.

Double (deep) Cup Basket Strainer w/ Stick Post (brass nut) Stainless steel basket and strainer. Brass nut.

E LUG SINK INSTALLATION KIT (4 CLIPS)

Fit-All Basin Stopper (1" to 1-1/2") 1" TO 1-1/2" WHITE RUBBER STOPPER.

Fit-all Bathtub and Laundry Stopper (1-1/2" to 2") 1-1/2" TO 2" WHITE RUBBER STOPPER

Flexible Hair Strainer KEEPS HAIR OUT OF DRAIN. MADE OF SOFT WHITE RUBBER

Flexible Wedges - 1.14" W x 1.94" L x .25" H Wedges can be trimmed and stacked.

Heavy Brass Over The Rim Tub Spout - Chrome Plated 5? Length. 3/4? connection w/ 1/2? bushing at wall end of spout.

Junior Duo Basket Strainer w/ 2-1/2" Shank Fits 1-7/8" to 2-1/4" Drains for Bar Sink or Laundry Tub. Comes with Brass Nut

Kitchen Garbage Disposal Stopper - White

Leg Tub Add-A-Shower w/ Code Spout and 24" x 42" Surround COMES WITH CHROME PLATED SHOWER HEAD, CODE PATTERN DIVERTER SPOUT & SUPPORTS . 61" RISER (3/8" IPS) WITH 12" ROD AND RISER SUPPORT. 3/4"...

Metal Adjustable Curtain Rod Holder - Chrome Plated Chrome plated zinc dies cast. Fits 15/16? OD and 1? OD rods. Turn to tighten against wall. Rubber pads will not mar surface. No screws needed.

Oval Stainless Steel Closet Bolt Washer .042 THICK STAINLESS STEEL

Plastic Paper Roller w/ 3/8" End- Chrome Plated SPRING ACTION

POP-UP ROD CLIP CHROME PLATED