Braxton Harris

100' Beaded Chain on a Reel 3/16". Trade Size # 10 100′ Beaded chain on a reel 3/16″. Trade size #10. Nickel plated brass.  

ACRYLIC TOWEL RING W/ EXPOSED SCREWS CHROME PLATED ZINC DIE CAST. COMES W/ SCREWS. QUICK INSTALLATION.  

1" x 6' ALUMINUM ANGLED SHOWER ROD 1″ OUTSIDE DIAMETER X 6′ LENGTH. MADE OF ALUMINUM.  

1" x 5' Aluminum Angled Shower Rod 1″ OUTSIDE DIAMETER X 5′ LENGTH. MADE OF ALUMINUM.  

1/2" IPS x 10" Length Adjustable Shower Arm

Small Air Admittance Valve (Ayrlett) (20 DFU 1-1/2" or 2" Pipe) Fits 1-1/2″ and 2″ Pipe sizes. Vents up to 160 DFU on a branch and up to 20 DFU on a stack. Can be used as an individual,...

Leg Tub Add-a-Shower Unit w/ 24" X 42" Rectangular Rod COMES WITH CHROME PLATED 2.5 GPM SHOWER HEAD, DIVERTER SPOUT & SUPPORTS . 61″ RISER (3/8″ IPS) WITH 12″ ROD AND RISER...

65" Brass Riser For AAS & AASDSR

Fixed Wall Bracket for #AASDSR

Add-A-Shower Diverter Spout & 61" Riser (3/8" IPS) 61″ RISER (3/8″ IPS), SHOWER HEAD 2.5 GPM @ 80 PSI LESS SHOWER ROD  

Replacement Diverter Spout for Add-a-shower (#AASDSR)  

Add-A-Shower Bathcock Diverter- Code Pattern

Leg Tub Add-A-Shower Bathcock Diverter CHROME PLATED BRASS. 3-3/8″ CENTER. 3/8″ FPT RISER CONNECTION  

Adjustable Wall Bracket for #AAS

Leg Tub Add-a-Shower Unit less Rectangular Rod COMES WITH 61″ RISER WITH WALL SUPPORTS, CHROME PLATED BATH COCK (3-3/8″ CENTERS) W/ DIVERTER AND CHROME PLATED SHOWER HEAD  

1-7/8" 3-Prong Steel Drain Strainer

1-5/8" 3-PRONG DRAIN STRAINER, STEEL  

7"-13" Pipe OD High Temperature Corrugated Roof Flashing Made for high temperature applications. Fits pipes 7″ (177mm) to 13″ (330mm) OD. Base diameter 16-1/2″ (412mm). Height...

7"-13" OD Corrugated Roof Flashing Fits pipes 7″ (177mm) to 13″ (330mm) OD. Base diameter 16-1/2″ (412mm). Made of virgin gray EPDM rubber with continuous service range of -65...

6"-11" OD Corrugated Roof Flashing Fits pipes 6″ (152mm) to 11″ (729mm) OD. Base diameter 14-1/2″ (368mm). Height 6″. Made of virgin gray EPDM rubber with continuous service...

5"-9" OD Corrugated Roof Flashing Fits pipes 5″ (127mm) to 9″ (228mm) OD. Base diameter 10-1/2″ (266mm). Height 6″. Made of virgin gray EPDM rubber with continuous service...

1/4"-5" Pipe OD High Temperature Corrugated Roof Flashing Made for high temperature applications. Fits pipes 1/4″ (6mm) to 5″ (127mm) OD. Base diameter 7-3/4″ (196mm). Height...

1/4"-5" Pipe OD Corrugated Roof Flashing Fits pipes 1/4″ (6mm) to 5″ (127mm) OD. Base diameter 7-3/4″ (196mm). Height 4″. Made of virgin gray EPDM rubber with continuous...

300 lb. Water Test Gauge 2-1/2″ Shatterproof face with steel case. 3/4″ female hose thread connection with rubber washer.  

8" Cast Iron Wing Nut Test Plug - Straight STRAIGHT PATTERN. CAST IRON. FITS INSIDE 8″ PIPE. UNEXPANDED OUTER DIMENSION IS 7-1/2″.  

6" Cast Iron Wing Nut Test Plug - Straight STRAIGHT PATTERN. CAST IRON. FITS INSIDE 6″ PIPE. UNEXPANDED OUTER DIMENSION IS 5-1/2″.  

5" Cast Iron Wing Nut Test Plug - Straight STRAIGHT PATTERN. CAST IRON. FITS INSIDE 5″ PIPE. UNEXPANDED OUTER DIMENSION IS 4-1/2″.  

4" Cast Iron Wing Nut Test Plug - Straight STRAIGHT PATTERN. CAST IRON. FITS INSIDE 4″ PIPE. UNEXPANDED OUTER DIMENSION IS 3-5/8″.  

3" Cast Iron Wing Nut Test Plug - Straight STRAIGHT PATTERN. CAST IRON. FITS INSIDE 3″ PIPE. UNEXPANDED OUTER DIMENSION IS 2-3/8″.  

2" Cast Iron Wing Nut Test Plug - Straight STRAIGHT PATTERN. CAST IRON. FITS INSIDE 2″ PIPE. UNEXPANDED OUTER DIMENSION IS 1-3/4″.  

Weksler Multi-angle Thermometer for Cold Water (0-120degrees) 3-1/2″ stem. 1″ NPSM. Well is sold separately. Adjustable to any angle. 9″ scale red reading mercury tubes.  

1/2" npt Straight Water Heater Thermometer w/ Brass Well (40-260 Degrees F) 2″ X 1/2″ NPT brass well. Range: 40-260 degrees Fehrenheit (5-120 x 2 C). For use with commercial and...

200lb Water/ Gas Test Gauge Assembly (3/4" mpt/ fght) 3/4″ male pipe threads or adapts to 3/4″ male hose threads. 2″ face with 1/4″ MPT adapter.  

Water Gauge Set (1/2"mpt x 5/8" OD x 12" Length)

2" Compound Pressure/ Vacuum Gauge 2″ FACE, 2 LB. INCREMENTS, STEEL CASE, 1/4″ MIP LOWER BRASS CONNECTION, 0-150 LB. RANGE. 0-30 IN VACUUM.  

6" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 5.62″ and maximum pipe ID 6.4″. Maximum...

4" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 3.78″ and maximum pipe ID 4.5″. Maximum...

3" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 2.86″ and maximum pipe ID 3.25″. Maximum...

2" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 1.96″ and maximum pipe ID 2.25″. Maximum...

1-1/2" Galvanized Mechanical Test Plugs Galvanized Steel Flanges with Molded Rubber Gaskets. Fits both cast iron and PVC pipe. Fits minimum pipe ID 1.44″ and maximum pipe ID 1.65. Maximum back...