Description
Dixon B9MP-G300 Clamp Cross - 3" 304 Stainless Steel
Dixon B9MP-G300 is a 3" sanitary clamp cross manufactured from 304 stainless steel for hygienic and process piping applications.
Part of Dixon's B9MP clamp-cross family, this fitting provides four sanitary clamp connections arranged in a cross configuration. It creates a four-way junction for compatible sanitary tubing systems while maintaining removable clamp connections for cleaning, inspection, equipment service, and system maintenance.
Product Highlights
- Genuine Dixon sanitary clamp cross
- Manufacturer part number B9MP-G300
- 3" tube outside diameter
- 304 stainless steel construction
- Four sanitary clamp connections
- Four-way cross configuration
- Designed for hygienic and process piping systems
- Published center-to-end dimension: 3.75"
- Published overall span: 7.500"
- 316L stainless steel equivalent: B9MP-R300
- Part of Dixon's sanitary/hygienic fittings family
Technical Specifications
| Brand | Dixon |
|---|---|
| Manufacturer Part Number | B9MP-G300 |
| Product Type | Clamp Cross |
| Series | B9MP |
| Tube O.D. | 3" |
| Material | 304 Stainless Steel |
| Connection Type | Sanitary Clamp |
| Number of Connections | 4 |
| Configuration | Cross |
| Published Center-to-End Dimension | 3.75" |
| Published Overall Span | 7.500" |
| 316L Stainless Steel Equivalent | B9MP-R300 |
| Application | Hygienic and process piping branch connections |
304 Stainless Steel Construction
The B9MP-G300 is manufactured from 304 stainless steel, a widely used corrosion-resistant material for sanitary and general process piping applications.
304 stainless steel provides dependable performance in many compatible food, beverage, dairy, and industrial process environments while offering the durability required for repeated sanitary-system assembly and cleaning.
Material suitability should always be confirmed for the specific process fluid, cleaning chemistry, operating temperature, sanitation procedure, and environmental conditions.
Four-Way Clamp Cross Configuration
The B9MP-G300 provides four 3" sanitary clamp connections arranged around a common center point.
This cross configuration creates a four-way junction within a sanitary process piping system. Depending on the system design, the fitting can be used where a process line branches into several directions or where multiple flow paths converge at a common connection point.
Because all four ports use sanitary clamp interfaces, the fitting can be removed from compatible piping assemblies for cleaning, inspection, maintenance, or system modification.
Sanitary Clamp Connections
Connection Benefits
- Four removable sanitary joints
- Fast assembly and disassembly
- Supports routine cleaning and inspection
- Useful for modular process piping
- Provides convenient maintenance access
Typical Joint Components
- Compatible mating sanitary ferrule
- Properly selected sanitary gasket
- Appropriate sanitary clamp
- Correctly aligned process tubing or equipment connection
- Properly supported piping
Published Dimensions
| Tube O.D. | 3" |
|---|---|
| Center-to-End | 3.75" |
| Overall Cross Span | 7.500" |
Dixon's current catalog lists the 3" B9MP-G300 with a 3.75" center-to-end dimension. Earlier Dixon dimensional tables list the same fitting with a 7.500" overall span across opposing clamp ends.
304 vs. 316L Version
B9MP-G300
- 3" tube O.D.
- 304 stainless steel
- Dixon G-series material configuration
- For systems requiring compatible 304 stainless steel construction
B9MP-R300
- 3" tube O.D.
- 316L stainless steel
- Dixon R-series material configuration
- Corresponding 316L version of the B9MP clamp cross
Typical Applications
Food & Beverage
- Food processing systems
- Beverage production
- Dairy processing
- Breweries
- Wineries and distilleries
Hygienic & Process Systems
- Sanitary fluid-transfer systems
- Compatible pharmaceutical process piping
- Process equipment manifolds
- Multi-branch process piping
- Compatible industrial process systems
Sanitary Fitting Selection
Dixon identifies B9MP-G300 by its 3" tube outside diameter. Confirm sanitary tube O.D. against the existing process piping before ordering.
Do not automatically substitute nominal pipe size for sanitary tube O.D. Sanitary tubing and conventional pipe systems use different dimensional conventions.
Also confirm that 304 stainless steel is the required material and that the mating ferrules, sanitary gaskets, and clamps are compatible with the 3" connections.
Gasket & Clamp Selection
Sanitary Gasket
- Match gasket size to the 3" sanitary connection
- Select gasket material for the process media
- Verify operating-temperature compatibility
- Verify compatibility with cleaning chemicals
- Inspect before assembly
Sanitary Clamp
- Use the proper clamp size and style
- Inspect clamp components for wear or damage
- Align ferrule faces before tightening
- Follow applicable clamp installation procedures
- Do not use the clamp to correct piping misalignment
Standards & Sanitary Applications
Dixon's current hygienic fittings catalog references 3-A Sanitary Standard 63-04 and authorization number 621 for the B9MP clamp-cross family.
Application-specific sanitary, regulatory, documentation, material, and installation requirements should still be confirmed for the individual process system before ordering or placing the fitting into service.
Installation
Confirm the 3" tube O.D., 304 stainless steel construction, and cross configuration before installation.
Inspect all four clamp faces for contamination, scratches, dents, deformation, or other damage that could interfere with gasket sealing.
Install correctly sized sanitary gaskets between each pair of mating ferrule faces. Select gasket material according to the process fluid, operating temperature, cleaning chemicals, sanitation procedures, and other system requirements.
Align all mating connections before installing the sanitary clamps. Do not use the fitting or clamps to pull misaligned tubing or equipment into position.
Properly support connected piping and equipment so excessive external loads are not transferred to the clamp cross or sanitary joints.
After assembly, inspect all four connections and verify leak-free operation under appropriate process conditions before placing the system into normal service.
Our team can help confirm your tube O.D., stainless steel grade, clamp size, gasket material, and mating sanitary components before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What size is Dixon B9MP-G300?
B9MP-G300 is a 3" tube O.D. sanitary clamp cross.
What material is B9MP-G300?
Dixon identifies B9MP-G300 as the 304 stainless steel version of the 3" B9MP clamp cross.
How many connections does B9MP-G300 have?
The fitting has four sanitary clamp connections arranged in a cross configuration.
What is the center-to-end dimension?
Dixon lists the center-to-end dimension as 3.75".
What is the overall span across opposing ends?
Older Dixon dimensional tables list the overall span as 7.500" across opposing clamp ends.
What is the 316L stainless steel equivalent?
B9MP-R300 is the corresponding 3" 316L stainless steel clamp cross.
What does the G designation identify?
Within this B9MP product family, the G-series part number identifies the 304 stainless steel version.
What does the R designation identify?
Within the same B9MP family, the R-series part number identifies the corresponding 316L stainless steel version.
Are sanitary clamps included?
Do not assume clamps are included unless specifically stated in the GetPipe.com offering. Appropriate sanitary clamps are normally selected separately for the application.
Are sanitary gaskets included?
Do not assume gaskets are included unless specifically stated. Select the appropriate gasket size and material for the process conditions.
What is a clamp cross used for?
A clamp cross creates four sanitary connections at a common junction for process piping systems that branch or converge in multiple directions.
Is the 3" size tube O.D. or nominal pipe size?
Dixon identifies B9MP-G300 by 3" tube O.D. It should not automatically be treated as conventional nominal pipe size.
What should I verify before ordering B9MP-G300?
Confirm the B9MP-G300 part number, 3" tube O.D., 304 stainless steel material, required dimensions, mating sanitary connections, gasket material, and clamp requirements.
Important Ordering & Installation Notes
- This listing is for Dixon part number B9MP-G300.
- Product type is a sanitary clamp cross.
- Tube outside diameter is 3".
- Material is 304 stainless steel.
- Published center-to-end dimension is 3.75".
- Older Dixon literature lists an overall span of 7.500".
- Four sanitary clamp connections are provided.
- B9MP-R300 is the corresponding 316L stainless steel version.
- Verify tube O.D. before ordering.
- Do not confuse sanitary tube O.D. with nominal pipe size.
- Confirm 304 stainless steel compatibility with process media and cleaning chemistry.
- Select sanitary gaskets separately unless specifically included.
- Select sanitary clamps separately unless specifically included.
- Verify gasket material for chemical and temperature compatibility.
- Inspect all four clamp faces before assembly.
- Do not use damaged or distorted sealing surfaces.
- Properly support connected piping and equipment.
- Do not use the fitting or clamps to force misaligned piping into position.
- Verify complete system pressure and temperature limitations before operation.
- Follow applicable sanitary installation, cleaning, inspection, and process requirements.
