Description
Dixon B7MP-R800 Clamp Tee - 8" 316L Stainless Steel
Dixon B7MP-R800 is an 8" sanitary clamp tee manufactured from 316L stainless steel for hygienic and process piping applications.
Part of Dixon's B7MP Clamp Tee family, this fitting provides three 8" sanitary clamp connections in a standard tee configuration. It creates a 90-degree branch from the main process line while maintaining removable clamp-style connections for cleaning, inspection, maintenance, and equipment service.
Product Highlights
- Genuine Dixon sanitary fitting
- Manufacturer part number B7MP-R800
- B7MP Clamp Tee series
- 8" sanitary tube O.D.
- 316L stainless steel construction
- Three sanitary clamp connections
- Standard equal-size tee configuration
- Current catalog dimension A: 7.88"
- Older published overall run: 15.750"
- Older published center-to-end dimension: 7.875"
- 304 stainless steel equivalent: B7MP-G800
- Designed for hygienic and sanitary process piping
Technical Specifications
| Brand | Dixon |
|---|---|
| Manufacturer Part Number | B7MP-R800 |
| Product Type | Clamp Tee |
| Series | B7MP |
| Tube O.D. | 8" |
| Run Size | 8" |
| Branch Size | 8" |
| Material | 316L Stainless Steel |
| Connection Type | Sanitary Clamp |
| Number of Connections | 3 |
| Configuration | Equal Clamp Tee |
| Current Catalog Dimension A | 7.88" |
| Older Published Overall Run | 15.750" |
| Older Center-to-End Dimension | 7.875" |
| 304 Stainless Steel Equivalent | B7MP-G800 |
| Typical Markets | Food, beverage, pharmaceutical, data center cooling, and compatible hygienic process systems |
Clamp Tee Configuration
The B7MP-R800 uses a standard equal-size sanitary tee configuration with three 8" clamp connections. Both ends of the straight run and the 90-degree branch use the same 8" tube O.D. size.
This fitting allows an 8" branch line to connect perpendicular to an 8" main run without reducing the branch size.
All three ports use sanitary clamp-style ends, allowing the tee to be assembled with compatible mating fittings, gaskets, and clamps and removed when inspection, cleaning, maintenance, or system modification is required.
316L Stainless Steel Construction
The B7MP-R800 is manufactured from 316L stainless steel, a corrosion-resistant stainless steel grade commonly used in hygienic and sanitary process piping systems.
316L stainless steel is frequently selected for compatible food, beverage, dairy, pharmaceutical, and industrial process applications where corrosion resistance, cleanability, and durable stainless steel construction are important.
Material suitability should always be confirmed for the actual process fluid, concentration, operating temperature, cleaning chemistry, sanitation procedures, and surrounding environment.
Sanitary Clamp Connections
8" Main Run
- Two 8" sanitary clamp connections
- Straight-through process flow path
- Maintains 8" tube O.D. through the run
- Removable clamp-style connections
- Designed for compatible sanitary tubing systems
8" Branch
- One 8" sanitary clamp branch connection
- 90-degree branch from the main run
- Same tube O.D. as the straight run
- No size reduction at the branch
- Suitable for equal-size process-line branching
Published Dimensions
| Tube O.D. | 8" |
|---|---|
| Current Catalog Dimension A | 7.88" |
| Older Overall Run | 15.750" |
| Older Center-to-End | 7.875" |
Dixon's current hygienic fittings catalog lists the 8" B7MP clamp tee with dimension A of 7.88". Earlier Dixon literature presents the horizontal run as 15.750" overall, corresponding to approximately 7.875" from the tee centerline to either end.
For fabrication, piping layout, equipment clearance, or installations where dimensional fit is critical, verify dimensions against the latest applicable Dixon drawing before installation.
316L vs. 304 Stainless Steel
B7MP-R800
- 8" tube O.D.
- 316L stainless steel
- Dixon R-series material configuration
- Equal clamp tee design
B7MP-G800
- 8" tube O.D.
- 304 stainless steel
- Dixon G-series material configuration
- Corresponding 304 stainless steel version
Typical Applications
Food & Beverage Processing
- Food processing systems
- Beverage production
- Dairy processing
- Breweries
- Compatible large-diameter sanitary piping
Process & Cooling Systems
- Compatible pharmaceutical process piping
- Sanitary fluid-transfer systems
- Process equipment connections
- Large-diameter branch connections
- Compatible data center cooling systems
Equal Tee vs. Reducing Tee
B7MP Equal Tee
The B7MP-R800 uses the same 8" tube O.D. size on both ends of the straight run and on the branch. It is intended where the branch line remains the same size as the main process line.
Reducing Tee
A reducing tee uses a smaller branch connection than the main run. If the branch line needs to transition to a smaller tube O.D., a compatible Dixon reducing tee should be selected instead.
Sanitary Fitting Selection
Dixon identifies B7MP-R800 as an 8" tube O.D. sanitary clamp tee. All three connections use the same 8" tube O.D. configuration.
Sanitary fitting sizes are based on tube outside diameter. Confirm the existing tube O.D. and mating sanitary connection geometry before ordering.
Also confirm that 316L stainless steel is appropriate for the process media, operating temperature, cleaning chemistry, sanitation requirements, and surrounding environment.
3-A Sanitary Information
Dixon's hygienic fittings documentation lists the B7MP Clamp Tee family under 3-A Sanitary Standard 63-04 and authorization number 621.
Application-specific sanitary, regulatory, certification, documentation, installation, and inspection requirements should still be confirmed for the complete process system.
Gasket & Clamp Selection
Sanitary Gaskets
- Select compatible gaskets for all three 8" connections
- Confirm sanitary connection geometry
- Select gasket material for the process media
- Verify operating-temperature compatibility
- Confirm compatibility with cleaning chemicals
- Inspect gaskets before assembly
Sanitary Clamps
- Use compatible sanitary clamps at all three connections
- Confirm mating connection geometry
- Inspect clamps before installation
- Align mating faces before tightening
- Properly support connected tubing and equipment
- Do not use clamps to force misaligned piping into position
Installation
Before installation, confirm the B7MP-R800 part number, 8" tube O.D., equal tee configuration, and 316L stainless steel construction.
Inspect all three sanitary connection faces for contamination, scratches, dents, deformation, or other damage that could interfere with proper gasket sealing.
Install compatible sanitary gaskets between each pair of mating connection faces. Select gasket material according to the process fluid, operating temperature, cleaning chemistry, sanitation procedures, and other system requirements.
Align connected tubing and equipment before installing and tightening the sanitary clamps. Do not use the clamps to pull misaligned piping into position.
Because of the larger 8" fitting size, properly support the main run and branch piping so equipment weight, piping weight, vibration, and other external loads are not transferred unnecessarily to the tee or sanitary joints.
After installation, inspect all three connections and verify leak-free operation under appropriate process conditions before placing the system into normal service.
Our team can help confirm your tube O.D., stainless steel grade, clamp size, gasket material, dimensions, and mating sanitary components before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is Dixon B7MP-R800?
B7MP-R800 is Dixon's 8" 316L stainless steel sanitary clamp tee.
What size is B7MP-R800?
The fitting is designed for 8" sanitary tube O.D.
What material is B7MP-R800?
Dixon lists B7MP-R800 as 316L stainless steel.
How many connections does it have?
The fitting has three sanitary clamp connections: two on the straight run and one on the 90-degree branch.
Is B7MP-R800 a reducing tee?
No. B7MP-R800 is an equal-size tee. The main run and branch all use the same 8" tube O.D.
What is the current catalog dimension A?
Dixon's current hygienic fittings catalog lists dimension A as 7.88".
What is the older published overall run?
Earlier Dixon literature lists the horizontal run as 15.750" overall.
What is the center-to-end dimension?
Older Dixon literature lists the center-to-end dimension as 7.875".
What is the 304 stainless steel equivalent?
B7MP-G800 is the corresponding 8" 304 stainless steel clamp tee.
Are sanitary clamps and gaskets included?
Do not assume clamps or gaskets are included unless specifically stated in the GetPipe.com offering. Compatible components should be selected for each sanitary connection.
Is the 8" size based on tube O.D.?
Yes. Dixon identifies this sanitary fitting using tube outside diameter.
What should I verify before ordering B7MP-R800?
Confirm the B7MP-R800 part number, 8" sanitary tube O.D., 316L stainless steel requirement, available installation space, gasket material, clamp compatibility, and mating sanitary components.
Important Ordering & Installation Notes
- This listing is for Dixon part number B7MP-R800.
- Product type is a sanitary clamp tee.
- Tube O.D. is 8".
- Material is 316L stainless steel.
- All three sanitary connections use the same 8" size.
- This is an equal clamp tee, not a reducing tee.
- Current catalog dimension A is 7.88".
- Older published overall run is 15.750".
- Older center-to-end dimension is 7.875".
- B7MP-G800 is the corresponding 304 stainless steel version.
- Verify sanitary tube O.D., clamp compatibility, gasket material, dimensions, and process compatibility before ordering.
- Properly support large-diameter piping so unnecessary external loads are not transferred to the fitting.
