Flo-Mac
Aluminum Weld Eccentric Reducer
- SKU:
- 16EC
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
- Ships From:
- Los Angeles, California
Description
Aluminum Weld Eccentric Reducer - Schedule 40
Aluminum Weld Eccentric Reducers are designed for welded aluminum piping systems that require a transition between two different pipe sizes while maintaining alignment along one side of the piping run. Manufactured from 6061-T6 aluminum, these reducers are supplied in Schedule 40, with Schedule 80 configurations available by request.
Made in the USA, these eccentric reducers provide a durable, lightweight solution for compatible fabricated aluminum piping systems where an offset size transition is required.
Product Highlights
- Eccentric reducer configuration
- Schedule 40
- Schedule 80 available by request
- 6061-T6 aluminum construction
- Designed for welded aluminum piping systems
- Transitions between different pipe sizes with an offset centerline
- Maintains alignment along one side of the piping run
- Domestic origin
- Made in the USA
Technical Specifications
| Product Type | Eccentric Reducer |
|---|---|
| Material | 6061-T6 Aluminum |
| Standard Schedule | Schedule 40 |
| Optional Schedule | Schedule 80 - Available by Request |
| Connection Type | Weld |
| Configuration | Eccentric Size Reduction |
| Origin | Domestic - Made in the USA |
Eccentric Reducer Design
An eccentric reducer transitions from a larger pipe size to a smaller pipe size while offsetting the centerlines of the two ends. This allows one side of the piping run to remain aligned through the size transition.
The eccentric configuration is useful in piping layouts where maintaining a consistent pipe elevation or offset alignment is important.
6061-T6 Aluminum Technical Information
6061-T6 aluminum provides a combination of strength, relatively low weight, corrosion resistance, and weldability for compatible fabricated piping applications.
| Aluminum Alloy | 6061 |
|---|---|
| Temper | T6 |
| Minimum Ultimate Tensile Strength | 42,000 psi (300 MPa) |
| Typical Ultimate Tensile Strength | 45,000 psi (310 MPa) |
| Minimum Yield Strength | 35,000 psi (241 MPa) |
| Typical Yield Strength | 40,000 psi (275 MPa) |
| Elongation - 0.250" (6.35 mm) or Less | 8% or More |
| Elongation - Thicker Sections | 10% |
| Typical Thermal Conductivity at 80°C | Approximately 152 W/m·K |
| Published Fatigue Limit | 14,000 psi (100 MPa) at 500,000,000 Completely Reversed Cycles |
T651 temper has similar mechanical properties to T6. The stated fatigue-limit value is based on cyclic loading using a standard R.R. Moore test machine and specimen.
Aluminum does not exhibit a clearly defined “knee” on its S-N fatigue curve, so the number of cycles representing “infinite life” is not as clearly defined as it is for some other materials. Actual fatigue performance can also be significantly affected by loading conditions, gradients, and surface finish.
Schedule Options
Schedule 40
This listing is for Schedule 40 aluminum weld eccentric reducers. Select both reducer sizes to match the compatible piping system.
Schedule 80 by Request
Schedule 80 eccentric reducer configurations are available by request. Contact the GetPipe.com team for assistance with Schedule 80 requirements.
Product Features
Offset Size Transition
The eccentric design provides a transition between different pipe sizes while maintaining alignment along one side of the piping run.
Welded Installation
The reducer is designed for incorporation into compatible welded aluminum piping systems and fabricated assemblies.
Common Applications
Fabricated Piping Systems
- Aluminum piping assemblies
- Welded piping systems
- Industrial fabrication
- Mechanical piping installations
- Process piping applications
Offset Pipe Transitions
- Reducing from larger to smaller pipe sizes
- Offset piping transitions
- Horizontal piping runs
- Equipment connections
- Custom aluminum piping assemblies
Product Documentation
Pipe Diameter & Wall Thickness Chart
Use the pipe chart to review common pipe diameters and wall thicknesses when selecting compatible reducer sizes.
Need Help Selecting an Aluminum Eccentric Reducer?
Our industrial PVF specialists can help confirm large-end size, small-end size, schedule, material, and welding requirements before you order. Contact us for Schedule 80 availability.
Frequently Asked Questions
What material are these reducers made from?
These eccentric reducers are manufactured from 6061-T6 aluminum.
What schedule is supplied?
This listing is for Schedule 40 aluminum weld eccentric reducers.
Is Schedule 80 available?
Yes. Schedule 80 configurations are available by request. Contact the GetPipe.com team for availability and ordering assistance.
What is an eccentric reducer used for?
An eccentric reducer transitions between two different pipe sizes while offsetting the centerlines, allowing one side of the piping run to remain aligned.
What is the difference between an eccentric and concentric reducer?
An eccentric reducer offsets the centerlines of the two pipe sizes, while a concentric reducer keeps both ends on the same centerline.
What is the minimum tensile strength of 6061-T6 aluminum?
The original material information lists an ultimate tensile strength of at least 42,000 psi (300 MPa), with a typical value of approximately 45,000 psi (310 MPa).
What is the minimum yield strength of 6061-T6 aluminum?
The original material information lists a yield strength of at least 35,000 psi (241 MPa), with a typical value of approximately 40,000 psi (275 MPa).
What elongation is listed for 6061-T6 aluminum?
For material 0.250" (6.35 mm) thick or less, elongation is listed as 8% or more. In thicker sections, elongation is listed as 10%.
What is the typical thermal conductivity?
The typical thermal conductivity of 6061-T6 aluminum at 80°C is approximately 152 W/m·K.
What fatigue-limit information is listed?
The material information lists a fatigue limit of 14,000 psi (100 MPa) for 500,000,000 completely reversed cycles using a standard R.R. Moore test machine and specimen.
Are these reducers designed to be welded?
Yes. They are designed for incorporation into compatible welded aluminum piping systems.
Are these aluminum reducers made in the USA?
Yes. These reducers are identified as domestic products made in the USA.
Important Ordering Notes
- Material: 6061-T6 aluminum.
- Configuration: Weld Eccentric Reducer.
- This listing is for Schedule 40.
- Schedule 80 is available by request.
- Domestic origin - Made in the USA.
- Confirm both larger and smaller nominal pipe sizes before ordering.
- Confirm the required schedule for both ends of the reducer.
- Match the reducer to compatible pipe wall thicknesses and project requirements.
- Confirm welding procedures and material compatibility for the intended piping system.
- Actual fatigue performance can vary based on loading, gradient, surface finish, and other application conditions.
- Refer to the pipe chart for common pipe diameters and wall thicknesses.
