Lesso America
ABS DWV Slip Plug (SPG)
- SKU:
- LN110S
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
ABS DWV Slip Plug (SPG)
ABS DWV Slip Plugs provide a compact closure for compatible ABS DWV openings in non-pressure drain, waste, vent, sewer, and general drainage systems.
Featuring a spigot (SPG) connection, this fitting is designed to close a compatible ABS DWV hub or fitting opening. Manufactured for non-pressure drainage service, it meets recognized standards including ASTM D2661, CSA B181.1, and NSF Standard 14.
Product Highlights
- ABS DWV slip plug
- Spigot connection
- Designed to close compatible ABS DWV openings
- Compact plug-style configuration
- Designed for drain, waste, and vent systems
- Suitable for sewer and general drainage applications
- Non-pressure fitting
- Maximum operating temperature of 140°F
- Not intended for compressed air or gas service
- Not intended for pressure testing
- Manufactured from virgin ABS polymers
- Complies with ASTM D2661
- Certified to CSA B181.1
- Meets NSF Standard 14 requirements
Technical Specifications
| Product Type | ABS DWV Slip Plug |
|---|---|
| Material | ABS |
| Connection Type | Spigot (SPG) |
| Joint Method | Spigot / Solvent-Cement Connection |
| System Type | Drain, Waste, and Vent (DWV) |
| Pressure Service | Non-Pressure |
| Maximum Operating Temperature | 140°F |
| Primary Function | Close a Compatible ABS DWV Opening |
| Referenced Standards | ASTM D3965, ASTM D2661, CSA B181.1, NSF Standard 14 |
| Typical Applications | Sanitary Drainage, Waste Lines, Vent Systems, Sewer, and General Drainage |
Connection Configuration
Spigot Connection
The spigot end is designed to fit into a compatible ABS DWV hub or fitting opening, providing a compact closure within the drainage system.
Construction Details
The slip plug is manufactured from virgin ABS polymer material suitable for molded fittings and ABS drainage systems.
Its compact spigot configuration allows the plug to fit directly into a compatible hub opening, providing a simple way to close an unused or terminated drainage connection.
The fitting is intended strictly for non-pressure ABS DWV applications and should be installed using compatible ABS joining procedures where a permanent solvent-cement connection is required.
Why Choose an ABS DWV Slip Plug?
Compact Pipe Closure
- Closes compatible ABS DWV openings
- Spigot-style connection
- Compact installation
- Useful for unused drainage connections
- Simple one-piece design
ABS DWV Benefits
- Lightweight construction
- Easy handling and installation
- Suitable for non-pressure drainage systems
- Compatible with ABS DWV components
- Designed for long-term drainage service
Typical Applications
Drainage Systems
- Sanitary drain lines
- Waste piping
- Vent piping
- Sewer systems
- General building drainage
Closure Applications
- Unused fitting openings
- Terminated branch connections
- ABS DWV modifications
- Residential plumbing
- Commercial drainage systems
Standards & Compliance
- ASTM D3965: ABS material requirements for pipe extrusion and molded fittings
- ASTM D2661: Schedule 40 ABS drain, waste, and vent pipe and fittings
- CSA B181.1: ABS drain, waste, and vent pipe, fittings, and accessories
- NSF Standard 14: Plastic piping system components and related materials
Installation
Verify the nominal spigot size before installation and confirm compatibility with the intended ABS DWV hub or fitting opening.
Clean and prepare the spigot and mating ABS surface according to accepted ABS installation procedures.
If the application requires a permanent connection, use compatible ABS solvent cement according to manufacturer recommendations and fully seat the plug into the mating opening.
Allow any solvent-cement joint to cure according to the cement manufacturer's recommendations before placing the drainage system into service.
Our piping specialists can help review your nominal size, mating fitting, drainage application, and ABS DWV compatibility before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is an ABS DWV slip plug used for?
It is used to close a compatible ABS DWV opening in a non-pressure drainage system.
What does SPG mean?
SPG means spigot. The plug is designed to fit into a compatible ABS DWV hub or fitting opening.
Is this fitting intended for pressure systems?
No. This fitting is intended for non-pressure drain, waste, vent, sewer, and general drainage applications.
Can it be used for compressed air or gas?
No. The supplied product information specifically states that ABS DWV fittings are not intended for transporting compressed air or gas.
Can this fitting be used for pressure testing?
No. The supplied product information states that ABS DWV fittings should not be used for pressure testing.
What is the maximum operating temperature?
The supplied product information specifies applications where operating temperatures do not exceed 140°F.
Does this fitting require solvent cement?
If a permanent ABS connection is required, the spigot connection can be installed using compatible ABS solvent-cement procedures according to manufacturer recommendations.
What standards are referenced?
The supplied product information references ASTM D3965, ASTM D2661, CSA B181.1, and NSF Standard 14.
Can this plug be used to close an unused branch?
Yes, when the size and connection configuration are compatible with the intended ABS DWV fitting or opening.
What should I verify before ordering?
Confirm the nominal spigot size, mating ABS opening, operating temperature, and intended non-pressure drainage application.
Important Ordering & Installation Notes
- This listing is for an ABS DWV Slip Plug with a SPG connection.
- Verify the required nominal spigot size before ordering.
- The spigot end is designed to fit into a compatible ABS DWV hub or fitting opening.
- This fitting is intended for non-pressure DWV, sewer, and general drainage applications.
- Do not use for compressed air or gas service.
- Do not use for pressure testing.
- Maximum operating temperature is 140°F.
- Use compatible ABS solvent cement where a permanent connection is required.
- Clean and prepare all mating surfaces before solvent-cement installation.
- Fully seat the plug into the compatible mating opening.
- Allow solvent-cement joints to cure according to the cement manufacturer's recommendations before service.
- Protect the fitting from incompatible chemicals and materials that may damage ABS compounds.
- Use caution with fire-stopping materials, sealants, and chemicals used around ABS piping.
- Consult manufacturer documentation for complete dimensions and installation requirements.
- Follow applicable plumbing codes and manufacturer installation recommendations.
