Lesso America
ABS DWV 90 Street Elbow (HUB x SPG)
- SKU:
- LN302
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
ABS DWV 90 Street Elbow (HUB x SPG)
ABS DWV 90° Street Elbows provide a compact 90-degree directional change in non-pressure drain, waste, vent, sewer, and general drainage systems.
Featuring a hub connection on one end and a spigot (SPG) connection on the other, this fitting allows a direct connection into another compatible ABS DWV hub without requiring an additional coupling. Manufactured for ABS DWV service, it meets recognized standards including ASTM D2661, CSA B181.1, and NSF Standard 14.
Product Highlights
- ABS DWV 90° street elbow
- Hub x Spigot connection configuration
- Provides a 90-degree directional change
- Street-style spigot end fits directly into a compatible hub
- Can reduce the need for additional couplings
- Useful for compact drainage layouts
- Hub connection accepts compatible ABS DWV pipe
- Designed for drain, waste, and vent systems
- Suitable for sewer and general drainage applications
- Non-pressure fitting
- Maximum operating temperature of 140°F
- Not intended for compressed air or gas service
- Not intended for pressure testing
- Manufactured from virgin ABS polymers
- Complies with ASTM D2661
- Certified to CSA B181.1
- Meets NSF Standard 14 requirements
Technical Specifications
| Product Type | ABS DWV 90° Street Elbow |
|---|---|
| Material | ABS |
| Connection Type | Hub x Spigot (SPG) |
| Angle | 90° |
| Joint Method | Solvent Cement |
| System Type | Drain, Waste, and Vent (DWV) |
| Pressure Service | Non-Pressure |
| Maximum Operating Temperature | 140°F |
| Primary Function | Provide a 90-Degree Directional Change with a Direct Street Connection |
| Referenced Standards | ASTM D3965, ASTM D2661, CSA B181.1, NSF Standard 14 |
| Typical Applications | Sanitary Drainage, Waste Lines, Vent Systems, Sewer, General Drainage, and Compact Piping Transitions |
Connection Configuration
Hub Connection
The hub end accepts compatible ABS DWV pipe for a permanent solvent-cement connection.
Spigot Connection
The spigot end is designed to fit directly into a compatible ABS DWV hub fitting, allowing a close-coupled installation without an extra pipe section or coupling.
Street Elbow Design
The street-style configuration combines one hub end with one spigot end, allowing the elbow to connect directly into another compatible hub fitting.
This can reduce overall assembly length and the number of separate fittings required in certain drainage layouts.
The 90-degree bend provides a directional change while preserving a compact connection arrangement for non-pressure ABS DWV systems.
Why Choose an ABS DWV 90° Street Elbow?
Compact Directional Change
- Creates a 90-degree turn
- Street end fits directly into a compatible hub
- Can eliminate the need for an extra coupling
- Helps reduce overall fitting length
- Useful in tighter drainage layouts
ABS DWV Benefits
- Lightweight construction
- Easy handling and installation
- Suitable for non-pressure drainage systems
- Compatible with ABS DWV piping systems
- Designed for long-term drainage service
Typical Applications
Drainage Systems
- Sanitary drain lines
- Waste piping
- Vent piping
- Sewer connections
- General building drainage
Routing Applications
- 90-degree piping turns
- Direct fitting-to-fitting connections
- Compact drainage assemblies
- Residential plumbing
- Commercial drainage systems
Standards & Compliance
- ASTM D3965: ABS material requirements for pipe extrusion and molded fittings
- ASTM D2661: Schedule 40 ABS drain, waste, and vent pipe and fittings
- CSA B181.1: ABS drain, waste, and vent pipe, fittings, and accessories
- NSF Standard 14: Plastic piping system components and related materials
Installation
Verify the nominal hub and spigot size before installation and confirm compatibility with the intended ABS DWV pipe and mating fitting.
Cut the mating ABS pipe square and remove burrs. Clean and prepare the pipe, hub, spigot, and mating fitting surfaces according to accepted ABS solvent-cement installation procedures.
Dry-fit the assembly first to confirm the required 90-degree orientation before applying solvent cement.
Apply compatible ABS solvent cement as required, fully seat the pipe into the hub and the spigot into the mating hub fitting, then maintain alignment while the joints set.
Our piping specialists can help review your pipe size, fitting layout, available installation space, and ABS DWV compatibility before you order.
Email the GetPipe.com Team Visit Quick SupportFrequently Asked Questions
What is an ABS DWV 90° street elbow used for?
It is used to create a 90-degree directional change in a non-pressure ABS drain, waste, or vent piping system.
What does HUB x SPG mean?
HUB means one end accepts compatible ABS pipe, while SPG means the other end is a spigot designed to fit into a compatible ABS hub fitting.
What makes this a street elbow?
The spigot end allows the elbow to connect directly into another compatible hub fitting without requiring an intermediate pipe section or coupling.
Does this fitting require solvent cement?
Yes. The hub and spigot connections are intended for compatible ABS solvent-cement installation.
Is this fitting intended for pressure systems?
No. This fitting is intended for non-pressure drain, waste, vent, sewer, and general drainage applications.
Can it be used for compressed air or gas?
No. The supplied product information specifically states that ABS DWV fittings are not intended for transporting compressed air or gas.
Can this fitting be used for pressure testing?
No. The supplied product information states that ABS DWV fittings should not be used for pressure testing.
What is the maximum operating temperature?
The supplied product information specifies applications where operating temperatures do not exceed 140°F.
What standards are referenced?
The supplied product information references ASTM D3965, ASTM D2661, CSA B181.1, and NSF Standard 14.
What should I verify before ordering?
Confirm the nominal hub and spigot size, mating pipe and fitting sizes, required 90-degree configuration, and intended non-pressure drainage application.
Important Ordering & Installation Notes
- This listing is for an ABS DWV 90° Street Elbow with HUB x SPG connections.
- Verify the required nominal size before ordering.
- The hub end accepts compatible ABS DWV pipe.
- The spigot end fits into a compatible ABS DWV hub fitting.
- The street-style connection can reduce the need for an additional coupling.
- Confirm fitting orientation before applying solvent cement.
- This fitting is intended for non-pressure DWV, sewer, and general drainage applications.
- Do not use for compressed air or gas service.
- Do not use for pressure testing.
- Maximum operating temperature is 140°F.
- Use compatible ABS solvent cement for installation.
- Cut pipe square and remove burrs before assembly.
- Clean and prepare all mating surfaces before solvent-cement installation.
- Fully seat the ABS pipe into the hub.
- Fully seat the spigot into the mating hub fitting.
- Maintain proper 90-degree alignment during installation.
- Allow completed joints to cure according to the solvent cement manufacturer's recommendations before service.
- Protect the fitting from incompatible chemicals and materials that may damage ABS compounds.
- Use caution with fire-stopping materials, sealants, and chemicals used around ABS piping.
- Consult manufacturer documentation for complete dimensions and installation requirements.
- Follow applicable plumbing codes and manufacturer installation recommendations.
