Prevost
90° Aluminum Male Thread Elbow for PPS Piping Systems
- SKU:
- PPS1 9CM
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
90° Aluminum Male Thread Elbow for PPS Piping Systems
PPS1 9CM 90° Aluminum Male Thread Elbows provide a transition from compatible PPS aluminum pipe to a male NPT threaded connection while changing the piping direction by 90 degrees. This configuration is useful where a PPS pipe run must connect directly to threaded equipment, valves, manifolds, or other compatible components.
Available in multiple pipe and male-thread combinations from 1/2" pipe OD x 3/8" MNPT through 3" pipe OD x 2-1/2" MNPT, the PPS1 9CM series provides a purpose-built threaded transition within the PPS aluminum piping system.
Product Highlights
- 90° aluminum male thread elbow for PPS piping systems
- PPS1 9CM fitting series
- Connects PPS pipe to a male NPT threaded connection
- Creates a 90-degree change in piping direction
- Multiple pipe OD and MNPT combinations available
- Part of the PPS 100% aluminum network
- Aluminum fitting construction
- Useful for connections to compatible threaded equipment and components
- Maximum operating pressure of 232 PSI
- Operating temperature range of -4°F to 176°F
- 11 configurations available
Technical Specifications
| Brand | Prevost |
|---|---|
| Product System | PPS Piping System |
| Product Type | 90° Aluminum Male Thread Elbow |
| Fitting Series | PPS1 9CM |
| Angle | 90° |
| Pipe Connection | PPS Pipe Socket |
| Thread Connection | Male NPT |
| Material | Aluminum |
| Maximum Operating Pressure | 232 PSI |
| Operating Temperature | -4°F to 176°F |
| Pipe OD Range | 1/2" through 3" |
| Male Thread Range | 3/8" MNPT through 2-1/2" MNPT |
Available Sizes & Dimensions
| Pipe OD x MNPT | Part Number | Dim. A | Dim. B | Dim. C | Dim. D |
|---|---|---|---|---|---|
| 1/2" x 3/8" MNPT | PPS1 9CM16252 | 1.26" | 2.36" | 1.97" | 1.02" |
| 1/2" x 1/2" MNPT | PPS1 9CM16253 | 1.26" | 2.36" | 2.17" | 1.02" |
| 3/4" x 1/2" MNPT | PPS1 9CM20253 | 1.50" | 2.83" | 2.40" | 1.26" |
| 1" x 1/2" MNPT | PPS1 9CM25253 | 1.81" | 3.43" | 2.80" | 1.50" |
| 1" x 3/4" MNPT | PPS1 9CM25254 | 1.81" | 3.43" | 2.83" | 1.50" |
| 1-1/4" x 1" MNPT | PPS1 9CM32255 | 2.24" | 4.06" | 3.46" | 1.81" |
| 1-1/2" x 1-1/4" MNPT | PPS1 9CM40256 | 2.68" | 4.84" | 4.17" | 2.24" |
| 1-1/2" x 1-1/2" MNPT | PPS1 9CM40257 | 2.68" | 4.84" | 4.17" | 2.24" |
| 2" x 1-1/2" MNPT | PPS1 9CM50257 | 3.31" | 6.81" | 6.89" | — |
| 2-1/2" x 2" MNPT | PPS1 9CM63258 | 3.94" | 8.11" | 7.99" | — |
| 3" x 2-1/2" MNPT | PPS1 9CM80259 | 4.72" | 9.57" | 9.65" | — |
Why Use a Male Thread Elbow?
Pipe-to-Thread Transition
- Connects PPS aluminum pipe to a compatible female NPT connection
- Eliminates the need for a separate elbow and threaded adapter in suitable installations
- Provides a compact 90-degree threaded transition
- Useful at equipment and component connection points
- Available with multiple pipe and thread-size combinations
90° Direction Change
- Changes the piping direction by 90 degrees
- Useful for equipment connections where space is limited
- Supports horizontal-to-vertical transitions
- Helps organize piping near walls and machinery
- Integrates into compatible PPS aluminum piping layouts
Common Applications
Threaded Equipment Connections
- Valves
- Manifolds
- Equipment connections
- Threaded accessories
- Distribution components with compatible female NPT ports
PPS Piping Networks
- Main piping connections
- Branch piping
- Equipment drops
- System extensions
- Piping modifications
- Industrial utility distribution
Selecting the Correct Fitting
Select the PPS1 9CM fitting according to both the PPS pipe outside diameter and the required male NPT thread size. Pipe OD alone is not sufficient because several pipe sizes are available with more than one threaded connection.
For example, 1" pipe is available with either a 1/2" MNPT or 3/4" MNPT connection, while 1-1/2" pipe is available with either 1-1/4" MNPT or 1-1/2" MNPT. Confirm both connection sizes before ordering.
Installation Considerations
- Confirm both the PPS pipe outside diameter and male NPT thread size before ordering.
- Verify the mating component has a compatible female NPT connection.
- Review fitting dimensions where installation clearance is limited.
- Prepare the PPS pipe connection according to PPS installation requirements.
- Use appropriate thread-sealing practices suitable for the application.
- Keep pipe ends, fitting connections, and threaded surfaces clean before assembly.
- Support connected piping and equipment appropriately.
- Do not exceed the published maximum operating pressure of 232 PSI.
- Maintain the system within the published -4°F to 176°F operating temperature range.
- Test the completed piping network before normal operation.
- Installation should be completed by personnel familiar with the piping system and intended service.
Review the PPS1 9CM 90° aluminum male thread elbow specification sheet for connection sizes, dimensions, and operating limits, or contact the GetPipe.com team for help selecting the correct pipe and thread combination.
Frequently Asked Questions
What is a PPS1 9CM fitting?
PPS1 9CM is a 90° aluminum elbow that connects compatible PPS pipe on one end to a male NPT threaded connection on the other.
What sizes are available?
This listing includes 11 pipe-and-thread combinations ranging from 1/2" pipe OD x 3/8" MNPT through 3" pipe OD x 2-1/2" MNPT.
Does the fitting have a male or female threaded end?
The threaded connection is male NPT.
Why are there multiple variants for the same pipe size?
Some PPS pipe diameters are offered with different male NPT thread sizes. For example, 1" pipe can be paired with either 1/2" MNPT or 3/4" MNPT.
What is the maximum operating pressure?
The published maximum operating pressure is 232 PSI.
What is the operating temperature range?
The published operating temperature range is -4°F to 176°F.
Is the fitting made from aluminum?
Yes. PPS1 9CM is part of the PPS 100% aluminum network.
How do I choose the correct fitting?
Match both the PPS pipe outside diameter and the required male NPT thread size to the connection in your piping system.
Can this elbow connect directly to a threaded component?
Yes, when the mating component has the corresponding compatible female NPT connection and is suitable for the intended application.
Are all of the fittings the same physical size?
No. The fitting dimensions vary according to pipe OD and thread size. Review the dimensional table when installation clearance is limited.
Where can I review the manufacturer's specifications?
The PPS1 9CM specification sheet is linked in the Ask Willy section directly above.
Important Ordering Notes
- This listing is for PPS1 9CM 90° aluminum male thread elbows.
- Select the fitting according to both pipe OD and MNPT thread size.
- Do not select the fitting based on pipe size alone where multiple thread options are available.
- Available combinations range from 1/2" pipe x 3/8" MNPT through 3" pipe x 2-1/2" MNPT.
- Each configuration has its own part number, dimensions, weight, price, cost, and EAN-13.
- Maximum operating pressure is 232 PSI.
- Published operating temperature range is -4°F to 176°F.
- Use with compatible PPS aluminum pipe and appropriately sized threaded components.
- Confirm thread compatibility before ordering.
- Install according to PPS system requirements.
