Charman Inc.
5/8" OD Yellow Coated Gas Connector with Straight Ball Valve - 3/4" MIP x 3/4" FIP
- Availability:
- Usually in Stock – Ships Quickly
- Weight:
- 0.00 LBS
Description
5/8" OD Yellow Coated Gas Connector with Straight Ball Valve - 3/4" MIP x 3/4" FIP
Charman Inc 5/8" OD Yellow Coated Gas Connectors with Straight Ball Valve provide a flexible gas connection with an integrated shutoff valve configuration. This family features a 3/4" MIP connection on one end and a 3/4" FIP straight ball valve connection on the other, with lengths from 12" through 72" for different installation layouts.
The flexible corrugated connector construction helps bridge fixed gas piping and compatible equipment where rigid-pipe alignment may be impractical. The integrated straight ball valve provides an accessible shutoff point while maintaining 3/4" nominal threaded connections at both ends.
Product Highlights
- Charman Inc yellow coated gas connector
- 5/8" outside diameter
- 3/4" MIP connection
- 3/4" FIP straight ball valve connection
- Integrated straight ball valve
- Flexible corrugated connector construction
- Yellow exterior coating
- Available in lengths from 12" through 72"
- Multiple lengths for different installation layouts
- Designed for compatible gas appliance and equipment connections
Technical Specifications
| Product Type | Yellow Coated Gas Connector with Straight Ball Valve |
|---|---|
| Brand | Charman Inc |
| Product Family | 800-58-A8 |
| Connector OD | 5/8" |
| Connection 1 | 3/4" MIP |
| Connection 2 | 3/4" FIP Straight Ball Valve |
| Connection Configuration | 3/4" Male Iron Pipe x 3/4" Female Iron Pipe Straight Ball Valve |
| Valve Style | Straight Ball Valve |
| Construction | Flexible Corrugated Gas Connector |
| Exterior | Yellow Coated |
| Available Lengths | 12", 18", 24", 30", 36", 48", 60" and 72" |
| Primary Application | Flexible Gas Appliance and Equipment Connections with Integrated Shutoff |
Understanding the Connection Configuration
This connector has a 3/4" MIP connection on one end and a 3/4" FIP straight ball valve on the other. The MIP end provides a male threaded connection, while the valve end provides a female threaded connection.
Both ends use the same 3/4" nominal pipe size, making this configuration useful where a male-to-female 3/4" connection and an integrated shutoff valve are required.
Why Choose a Connector with a Straight Ball Valve?
Flexible Installation
- Accommodates practical routing between fixed connection points
- Useful where rigid piping alignment is difficult
- Provides flexibility between gas piping and connected equipment
- Multiple lengths accommodate different installation layouts
- Helps simplify final appliance and equipment connections
Integrated Shutoff
- Includes a straight ball valve
- Provides an accessible shutoff point within the connection assembly
- 3/4" FIP valve-side connection
- 3/4" MIP connector-side connection
- Combines flexible connection and shutoff functionality in one configuration
Choosing the Correct Length
Measure the distance and planned routing between the gas supply and appliance or equipment connection before selecting a connector. Choose a length that provides adequate routing without requiring the connector to be stretched or placed under unnecessary tension.
Available lengths range from 12" through 72", allowing the connector to be matched more closely to the installation. Avoid selecting excessive length simply to create additional slack.
Common Applications
Gas-Fired Equipment
- Compatible gas appliances
- Commercial cooking equipment
- Heating equipment
- Mechanical equipment
- Other compatible gas-fired equipment
Installation & Replacement
- New equipment installations
- Replacement gas connector applications
- Maintenance projects
- Equipment connection updates
- Applications benefiting from an integrated straight shutoff valve
Available Connector Lengths
The 800-58-A8 connector family is available in eight lengths while maintaining the same 5/8" OD, 3/4" MIP x 3/4" FIP connection configuration, and straight ball valve design.
- 12"
- 18"
- 24"
- 30"
- 36"
- 48"
- 60"
- 72"
Straight Ball Valve Connection
The straight ball valve provides an integrated shutoff point at the 3/4" FIP end of the connector assembly. This can simplify installations where an accessible shutoff valve is required near the connected appliance or equipment.
Confirm valve orientation, accessibility, thread sizes, and system requirements before ordering and installation.
Ask Willy: Need Gas Connector Help?
Review the Yellow Coated Gas Connector specification sheet for product information, or use the complete Charman Inc connector catalog to compare available connector diameters, connection configurations, valve options, and lengths before ordering.
Installation & Selection Guidance
- Confirm that a 5/8" OD gas connector is appropriate for the intended installation.
- Confirm the required connection configuration is 3/4" MIP x 3/4" FIP with straight ball valve.
- Verify that the 3/4" MIP end mates with a compatible female threaded connection.
- Verify that the 3/4" FIP valve end mates with a compatible male threaded connection.
- Confirm the straight ball valve will remain accessible after installation.
- Select a connector length appropriate for the actual installation distance and routing.
- Do not stretch the connector to reach between connection points.
- Avoid sharp bends, kinks, crushing, twisting, or other connector damage.
- Route the connector so it is protected from physical damage.
- Inspect the connector, coating, valve, and end fittings before installation.
- Avoid contact with sharp edges or surfaces that could damage the connector or coating.
- Use connection and sealing practices appropriate for the gas piping system and applicable requirements.
- Leak-test completed gas connections using an appropriate method before placing equipment into service.
- Follow applicable fuel-gas codes, local requirements, equipment instructions, and connector documentation.
- Installation should be completed by qualified personnel familiar with gas piping systems.
Product Selection Considerations
Connection & Valve Configuration
This family uses a 3/4" MIP connection on one end and a 3/4" FIP straight ball valve on the other. Confirm both thread types and that an integrated straight ball valve is appropriate for the installation.
Connector Length
Select from 12", 18", 24", 30", 36", 48", 60", or 72" according to the required installation distance and routing. Choose a length that permits proper installation without stretching or excessive slack.
Need Help Selecting a Gas Connector?
Our PVF specialists can help review your connector diameter, MIP and FIP requirements, ball valve configuration, required length, and installation conditions before you order.
Frequently Asked Questions
What size is this gas connector?
This connector family has a 5/8" outside diameter with a 3/4" MIP connection and a 3/4" FIP straight ball valve connection.
What connections does this connector have?
It has a 3/4" MIP male threaded connection on one end and a 3/4" FIP female threaded straight ball valve on the other.
Does this connector include a shutoff valve?
Yes. This connector configuration includes a straight ball valve at the 3/4" FIP end.
What lengths are available?
This listing includes 12", 18", 24", 30", 36", 48", 60", and 72" lengths.
What does MIP mean?
MIP identifies a male threaded pipe connection. The connector end in this family is 3/4" MIP.
What does FIP mean?
FIP identifies a female threaded pipe connection. The straight ball valve end in this family is 3/4" FIP.
Are both threaded connections the same nominal size?
Yes. Both connections are 3/4" nominal size, but one is male and the valve-side connection is female.
How do I choose the correct connector length?
Measure the required connection distance and consider the intended routing. Select a length that allows proper installation without stretching, kinking, twisting, or placing unnecessary tension on the connector.
Should the ball valve remain accessible?
Yes. The valve should be positioned so it remains accessible for normal operation and service in accordance with applicable installation requirements.
Should gas connections be leak-tested after installation?
Yes. Completed gas connections should be leak-tested using an appropriate method before the connected equipment is placed into service.
Important Ordering Notes
- This listing is for Charman Inc 5/8" OD yellow coated gas connectors with straight ball valve.
- Connection configuration is 3/4" MIP x 3/4" FIP straight ball valve.
- The 3/4" MIP connection is male threaded.
- The 3/4" FIP connection is female threaded and incorporates the straight ball valve.
- Select the required connector length from the available options.
- Available lengths are 12", 18", 24", 30", 36", 48", 60", and 72".
- Confirm both mating connection types before ordering.
- Confirm the valve will remain accessible after installation.
- Confirm connector routing and required installation length before ordering.
- Do not install a connector that is kinked, twisted, crushed, or otherwise damaged.
- Review the linked Charman Inc specification sheet and connector catalog for additional product information.
- Installation should comply with applicable fuel-gas codes, equipment requirements, and local regulations.
- Gas connections should be installed and tested by qualified personnel.
