Dixon
4" Stainless Steel Band Clamp
- SKU:
- NLDIXKS16
- Availability:
- Limited quantity available.
- Weight:
- 0.18 LBS
Description
4" Stainless Steel Band Clamp
4" Stainless Steel Band Clamp provides a preformed stainless steel clamping solution for compatible hose and coupling assemblies.
Constructed from 300 Series stainless steel, the Dixon KS16 uses a 302 Series stainless steel buckle with a 5/8" band width and .030" band thickness. The preformed clamp can be center punched or rolled over with compatible installation tooling.
Product Highlights
Stainless steel preformed clamp designed to secure compatible hose and coupling assemblies with proper tooling.
The 4" KS16 uses a 5/8" wide band with .030" thickness and a stainless steel buckle.
Technical Specifications
Band Clamp Installation Configuration
The KS16 provides a preformed stainless steel band sized for installation around a compatible hose and coupling assembly.
The preformed clamp can be center punched or rolled over using compatible tooling designed for the 5/8" band width.
Stainless Steel Band Clamp Design
The Dixon KS16 is supplied as a preformed band clamp with a specified 4" inside diameter. This provides a ready-sized clamping component for compatible hose and coupling assemblies.
Confirm the completed hose assembly diameter before installation because clamp selection should match the finished assembly rather than hose size alone.
The KS16 uses a 300 Series stainless steel band combined with a 302 Series stainless steel buckle. This provides stainless construction throughout the primary clamping components.
Inspect the band and buckle before installation for deformation, contamination, or visible damage. Damaged clamps should be replaced before assembly.
The clamp uses a 5/8" wide band with a .030" thickness. These dimensions should be confirmed when selecting replacement clamps and compatible installation tooling.
The clamp can be center punched or rolled over depending on the selected tool and installation method. Follow the appropriate tooling procedure during assembly.
The 4" dimension identifies the KS16 clamp inside diameter. Proper selection should account for the complete hose and coupling assembly after all components are positioned.
Verify clamp ID, band width, thickness, material, buckle construction, and tooling before ordering to ensure the clamp matches the intended installation.
Installation & Selection Considerations
Confirm the 4" clamp ID.
Verify the 5/8" band width.
Confirm .030" band thickness.
Match the completed hose assembly.
Use compatible installation tooling.

Our product specialists can help review clamp ID, stainless steel construction, band dimensions, hose requirements, and compatible installation tooling before you order.
Frequently Asked Questions
What is the Dixon KS16?
The KS16 is a Dixon K-Series preformed stainless steel band clamp with a 4" clamp inside diameter.
What material is the KS16 made from?
The band is 300 Series stainless steel and the buckle is 302 Series stainless steel.
What is the KS16 band width?
The Dixon KS16 uses a 5/8" wide stainless steel band.
What is the band thickness?
The KS16 uses a .030" thick stainless steel band.
How can the KS16 clamp be installed?
The preformed clamp can be center punched or rolled over using compatible installation tooling.
What is the package quantity for the KS16?
Dixon specifies a mandatory package quantity of 25 clamps for the KS16.
Important Ordering & Installation Notes
- Verify Dixon part number KS16.
- Confirm the 4" clamp ID.
- Verify the 5/8" band width.
- Confirm .030" band thickness.
- Verify stainless steel construction.
- Inspect the clamp before installation.
- Confirm hose and coupling compatibility.
- Use compatible installation tooling.
- Follow the selected tool instructions.
- Verify the completed assembly before service.