Spears
3" x 4" PVC DWV 90 Street Reducing Closet Elbow (S x H)
- SKU:
- P330
- Availability:
- Usually Ships Same Day
- Weight:
- 1.28 LBS
Description
3" x 4" PVC DWV 90 Street Reducing Closet Elbow (S x H)
3" x 4" PVC DWV 90 Street Reducing Closet Elbow (S x H) provides a 90-degree directional transition within compatible PVC drain, waste, and vent piping at a closet or toilet drainage connection. The street configuration combines a spigot connection with a hub connection while incorporating a 3" x 4" reducing size arrangement.
The 3" x 4" S x H street reducing closet elbow configuration combines a right-angle directional change, different nominal sizes, and two connection interfaces within one PVC DWV fitting. Selection should account for both connection sizes, spigot and hub compatibility, adjoining components, elbow orientation, joining requirements, piping alignment, support, and available installation clearance.
Product Highlights
- PVC construction
- DWV fitting design
- 90° closet elbow
- Street reducing configuration
- Spigot x hub connections
- 3" x 4" size arrangement
- Connects compatible PVC DWV components
- Combines a size transition and right-angle closet drainage connection
Technical Specifications
| Product Type | Street Reducing Closet Elbow |
|---|---|
| Material | PVC |
| System Type | DWV |
| Size | 3" x 4" |
| Connection | Spigot x Hub (S x H) |
| Connection Count | Two |
| Fitting Configuration | 90° Street Reducing Closet Elbow |
| Spigot Interface | Compatible Receiving Hub |
| Hub Interface | Compatible PVC DWV Pipe |
| Joining Method | Compatible PVC DWV Joining Procedure |
| Directional Change | 90° |
| Primary Function | Provide a 90-Degree 3" x 4" Reducing Transition Within Compatible PVC DWV Piping |
Street Closet Elbow Design
The street closet elbow configuration provides a 90-degree directional change while incorporating a spigot connection on one end. This allows the fitting to connect directly into a compatible receiving hub while providing the specified closet drainage transition.
The elbow orientation should be established before permanent joining so both connections align with the intended fixture and piping layout. Planning the position helps coordinate adjoining components, nearby fittings, support, and available working clearance.
Spigot & Hub Connections
The spigot connection fits into an appropriately sized compatible receiving hub, while the hub connection receives compatible PVC DWV pipe. Because the fitting uses a 3" x 4" reducing arrangement, each connection should be matched carefully to the correct adjoining component.
The mating surfaces should be prepared using the appropriate PVC DWV joining procedure. Proper insertion, compatible joining materials, correct elbow orientation, and careful alignment help establish the connections without unnecessary stress on the fitting.
PVC DWV Integration
The PVC DWV construction allows the street reducing closet elbow to integrate into compatible drain, waste, and vent piping arrangements at toilet fixture locations. Matching the 3" x 4" connection sizes and S x H interfaces to the adjoining components helps maintain the intended drainage configuration.
Application suitability should be evaluated using the requirements of the complete DWV system. Adjoining materials, connection compatibility, fixture location, joining materials, piping support, and local installation requirements should all be considered during fitting selection.
90° Reducing Transition
A 3" x 4" PVC DWV 90 Street Reducing Closet Elbow combines a right-angle transition, size reduction, and street-style connection within one fitting. The S x H arrangement provides a compact connection between compatible adjoining components.
Installation planning should consider elbow orientation, spigot engagement, fixture alignment, adjoining pipe position, nearby fittings, available clearance, and piping support. Connected components should align naturally without forcing the fitting into position.
Installation & Selection Considerations
- Confirm the 3" x 4" sizes.
- Verify the S x H arrangement.
- Check PVC DWV compatibility.
- Confirm the required 90° orientation.
- Align adjoining components before assembly.
Our PVC fitting specialists can help review the 3" x 4" configuration, DWV requirements, S x H connections, adjoining PVC components, fixture layout, elbow orientation, joining requirements, piping alignment, and available installation clearance before you order.
Frequently Asked Questions
What is a 3" x 4" PVC DWV 90 Street Reducing Closet Elbow used for?
It provides a 90-degree closet drainage transition while incorporating 3" and 4" connection sizes and a street-style spigot connection.
What does S x H mean?
It identifies a spigot connection at one end and a hub connection at the other.
Why is this fitting called reducing?
The fitting incorporates different specified nominal connection sizes within the elbow configuration.
What connects to the spigot end?
The spigot end fits into an appropriately sized compatible receiving hub.
Does elbow orientation matter?
Yes. The elbow should be positioned so the 90-degree transition corresponds with the intended closet drainage layout.
What should I confirm before ordering?
Confirm the 3" x 4" sizes, S x H arrangement, PVC DWV compatibility, and required elbow orientation.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm the 3" x 4" sizes.
- Verify the S x H arrangement.
- Prepare adjoining components correctly.
- Set the elbow orientation before assembly.
