Merit Brass
125# Leaded Brass 90° Elbow
- SKU:
- X101
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
125# Leaded Brass 90° Elbow
125# Leaded Brass 90° Elbows are threaded fittings designed to change the direction of compatible piping by 90 degrees. The brass construction provides a compact threaded connection for compatible plumbing, mechanical, and industrial piping systems.
This product is identified as a 125# leaded brass fitting. Manufacturer dimensional, certification, and material safety documentation is provided below for reference.
Product Highlights
- 125# brass 90° elbow
- Leaded brass construction
- 90-degree directional change
- Threaded fitting configuration
- Designed for compatible piping systems
- Compact elbow body
- Suitable for compatible plumbing and mechanical applications
- Manufacturer fitting dimensions available
- Manufacturer certification letter available
- Material Safety Data Sheet available
Technical Specifications
| Product Type | 90° Elbow |
|---|---|
| Pressure Class | 125# |
| Material | Brass |
| Lead Status | Leaded |
| Connection Type | Threaded |
| Angle | 90° |
| Primary Function | Changing Piping Direction by 90 Degrees |
| Product Documentation | Dimensions, Certification Letter, and SDS Available |
90° Elbow Construction
A 90° elbow is used to redirect a compatible threaded piping run through a right-angle turn. This allows piping to change direction while maintaining a threaded mechanical connection.
The fitting is suitable for compatible piping layouts where a compact 90-degree directional change is required.
Why Choose a 90° Elbow?
Directional Change
- Changes piping direction by 90 degrees
- Useful in compact piping layouts
- Helps route piping around equipment and structures
- Threaded fitting configuration
- Suitable for compatible plumbing and mechanical systems
Brass Construction
- Brass fitting body
- Leaded material
- Suitable for compatible piping applications
- Manufacturer dimensional information available
- Certification and SDS documentation provided
90° Elbow vs. 45° Elbow
90° Elbow
- Provides a right-angle turn
- Changes piping direction by 90 degrees
- Common in tight directional changes
- Used where a sharper turn is required
- This product configuration
45° Elbow
- Provides a shallower directional change
- Changes piping direction by 45 degrees
- Useful for offset piping arrangements
- Requires a different piping layout
- Different angle from this fitting
Common Applications
Plumbing & Mechanical Piping
- Threaded piping systems
- Pipe routing changes
- Equipment connections
- Utility piping
- General plumbing assemblies
Industrial & General Service
- Mechanical piping installations
- Maintenance and repair work
- Compatible process piping
- Equipment piping connections
- Applications requiring a brass threaded elbow
Installation & Selection Guidance
- Confirm the required nominal fitting size before ordering.
- Verify thread compatibility with the mating piping components.
- Confirm the 90-degree configuration matches the intended piping layout.
- Use an appropriate thread sealant for the system media, pressure, and temperature.
- Apply thread sealant according to the sealant manufacturer's instructions.
- Avoid over-tightening threaded fittings.
- Confirm pressure, temperature, and media compatibility before use.
- Verify that leaded brass is permitted for the intended application.
- Installation should comply with applicable piping, plumbing, and project requirements.
Important Material Notice
- This product is identified as leaded brass.
- Confirm that leaded fittings are permitted for the intended application before installation.
- Do not assume this product meets lead-free potable-water requirements.
- Review the manufacturer certification and material safety documentation for additional information.
Product Documents
Import Brass Leaded Fitting Dimensions
Review manufacturer dimensional information for applicable leaded brass fittings and connection sizes.
Import Brass Leaded Fitting Certification Letter
Review manufacturer certification documentation for the import leaded brass fitting product line.
Material Safety Data Sheet
Review the supplied material safety documentation for the leaded brass fitting product line.
Need Help Selecting a 125# Leaded Brass 90° Elbow?
Our industrial PVF specialists can help review your fitting size, thread requirements, piping layout, and material requirements before you order.
Frequently Asked Questions
What is a 90° elbow used for?
A 90° elbow is used to change the direction of a compatible piping run by 90 degrees.
What material is this fitting?
The supplied product information identifies this fitting as leaded brass.
What pressure class is this fitting?
The product is identified as a 125# fitting.
Is this fitting threaded?
Yes. This product is intended for compatible threaded piping connections.
Is this fitting lead free?
No. The supplied product information identifies this fitting as leaded.
Where can I find fitting dimensions?
Use the Import Brass Leaded Fitting Dimensions document in the Product Documents section above.
Where can I find certification information?
Use the Import Brass Leaded Fitting Certification Letter in the Product Documents section above.
Is an SDS available?
Yes. A Material Safety Data Sheet is provided in the Product Documents section above.
Important Ordering Notes
- Product is a 125# leaded brass 90° elbow.
- Threaded fitting configuration.
- Designed to change piping direction by 90 degrees.
- Leaded brass construction.
- Confirm nominal fitting size before ordering.
- Verify thread compatibility with mating piping components.
- Confirm pressure, temperature, and media compatibility before use.
- Verify that leaded material is permitted for the intended application.
- Refer to the manufacturer dimensional, certification, and SDS documents for additional product information.
