Merit Brass
125# Lead Free Brass Hex Bushing
- SKU:
- XNL114
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
125# Lead Free Brass Hex Bushing
125# Lead Free Brass Hex Bushings are threaded reducing fittings designed to connect a larger female-threaded opening to a smaller male-threaded pipe, fitting, valve, or equipment connection. The compact hex-body design provides wrench flats for installation while combining male and female threaded connections in a single reducing fitting.
These fittings conform with the lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act and are certified to contain ≤0.25 weighted average % lead. Manufacturer dimensional, certification, and material safety documentation is provided below.
Product Highlights
- 125# lead free brass hex bushing
- Designed to reduce a threaded connection to a smaller nominal size
- Male x female threaded configuration
- Hex body provides wrench flats for installation
- Compact reducing fitting design
- Lead free brass construction
- Conforms with lead-content requirements for lead-free plumbing under the U.S. Safe Drinking Water Act
- Certified ≤0.25 weighted average % lead
- Designed for compatible threaded plumbing and piping systems
- Manufacturer dimensional and certification documentation available
Technical Specifications
| Product Type | Hex Bushing |
|---|---|
| Pressure Class | 125# |
| Material | Lead Free Brass |
| Connection Type | Threaded |
| Connection Configuration | Male x Female |
| Configuration | Reducing Hex Bushing |
| Lead Content | ≤0.25 Weighted Average % Lead |
| Compliance | Conforms with Lead Content Requirements for Lead Free Plumbing as Defined by the U.S. Safe Drinking Water Act |
| Primary Function | Reducing a Female-Threaded Connection to a Smaller Threaded Size |
Hex Bushing Construction
A hex bushing is a reducing fitting with external male threads and a smaller internal female threaded opening. It installs into a compatible female-threaded fitting, valve, or equipment connection and provides a smaller female connection for the next piping component.
The hex-shaped body provides wrench flats that make the bushing easier to tighten and remove during installation or system servicing.
Lead free brass construction makes this fitting suitable for applications requiring compliance with applicable lead-content requirements for plumbing products.
Why Choose a Lead Free Brass Hex Bushing?
Compact Size Reduction
- Reduces a larger threaded opening to a smaller size
- Male x female threaded configuration
- Combines size transition into one compact fitting
- Useful at valves, equipment, and threaded fittings
- Can reduce the need for larger multi-fitting transition assemblies
Hex Body Design
- Provides wrench flats for installation
- Helps provide controlled tightening
- Allows easier removal during servicing
- Compact profile for confined installations
- Suitable for compatible threaded piping assemblies
Lead Free Compliance
The supplied product information states that these fittings conform with lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act.
The fittings are also identified as being certified to contain ≤0.25 weighted average % lead. Review the manufacturer certification letter in the Product Documents section for additional certification information.
Hex Bushing vs. Reducing Coupling
Hex Bushing
- Male thread on the larger outside connection
- Female thread on the smaller inside connection
- Installs directly into a larger female-threaded opening
- Compact reducing configuration
- Hex body provides wrench flats
Reducing Coupling
- Female threaded connection on both ends
- Connects two male-threaded components of different sizes
- Used as an in-line reducing fitting
- Does not thread directly into a female fitting like a bushing
- Different connection configuration from a hex bushing
Common Applications
Plumbing & Water Systems
- Potable-water piping where applicable
- Commercial plumbing systems
- Water distribution piping
- Fixture connections
- Threaded pipe size transitions
Commercial & General Service
- Mechanical piping installations
- Utility piping systems
- Valve connections
- Equipment ports
- Applications requiring a compact threaded size reduction
Installation & Selection Guidance
- Confirm both the larger male thread size and smaller female thread size before ordering.
- Verify thread compatibility with both mating components.
- Use an appropriate thread sealant suitable for the piping material, system media, pressure, and temperature.
- Apply thread sealant according to the sealant manufacturer's instructions.
- Use the hex wrench flats when tightening the bushing.
- Avoid over-tightening threaded brass fittings.
- Confirm that the 125# fitting class is suitable for the intended piping system.
- Verify media, pressure, and temperature compatibility before installation.
- Confirm lead-free requirements for the specific plumbing application.
- Inspect the completed threaded connections for leaks before placing the system into service.
- Installation should comply with applicable plumbing codes and project requirements.
Product Documents
Import Brass Fitting Dimensions
Review manufacturer dimensional information for applicable lead free brass hex bushings and connection sizes.
Import Brass Fitting Certification Letter
Review the manufacturer certification documentation covering the lead free brass fitting product line.
Material Safety Data Sheet
Review the manufacturer material safety documentation for additional product and material information.
Need Help Selecting a Lead Free Brass Hex Bushing?
Our industrial PVF specialists can help review your larger and smaller thread sizes, pressure class, application, and lead-free plumbing requirements before you order.
Frequently Asked Questions
What is a brass hex bushing used for?
A hex bushing is used to reduce a larger female-threaded connection to a smaller female threaded size.
What connections does a hex bushing have?
A hex bushing has external male threads and a smaller internal female threaded connection.
Why does the bushing have a hex-shaped body?
The hex body provides wrench flats that make the fitting easier to tighten or remove during installation and servicing.
What pressure class is this fitting?
This fitting is identified as a 125# lead free brass hex bushing.
Is this fitting lead free?
Yes. The supplied product information states that it conforms with lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act.
What is the certified lead content?
The fitting is identified as containing no more than 0.25 weighted average percent lead.
How is a hex bushing different from a reducing coupling?
A hex bushing has male threads on the larger connection and female threads on the smaller connection. A reducing coupling has female threaded connections on both ends.
Can this fitting be used in potable-water systems?
The supplied product information states that the fitting conforms with U.S. Safe Drinking Water Act lead-content requirements for lead-free plumbing. Confirm all applicable local plumbing-code and system requirements before installation.
Where can I find fitting dimensions?
Use the Import Brass Fitting Dimensions document in the Product Documents section above.
Where can I verify the lead-free certification?
Use the Import Brass Fitting Certification Letter provided in the Product Documents section above.
Is material safety information available?
Yes. A manufacturer Material Safety Data Sheet is provided in the Product Documents section above.
Important Ordering Notes
- Product is a 125# lead free brass hex bushing.
- Designed to reduce a larger female-threaded opening to a smaller threaded size.
- Male x female threaded reducing configuration.
- Hex body provides wrench flats for installation.
- Conforms with lead-content requirements for lead-free plumbing as defined by the U.S. Safe Drinking Water Act.
- Certified ≤0.25 weighted average % lead.
- Confirm both nominal connection sizes before ordering.
- Verify the larger male thread and smaller female thread sizes.
- Confirm pressure, temperature, and media compatibility before use.
- Review applicable plumbing-code requirements for potable-water installations.
- Refer to the manufacturer dimensional, certification, and material safety documents for additional product information.
