Description
125# Bronze Threaded 45° Elbows
ASC / SCI FIG 36F1 125# Bronze Threaded 45° Elbows provide a 45-degree directional change for compatible threaded piping systems.
Manufactured from cast bronze ASTM B62, UNS Alloy C83600, these Class 125 fittings feature female NPT connections. SCI bronze fittings are UL Listed and 100% air tested for quality.
Product Highlights
- ASC / SCI FIG 36F1
- Class 125 bronze fitting
- 45° elbow configuration
- Female NPT connections
- UL Listed
- 100% air tested
Technical Specifications
| Product Type | 45° Elbow |
|---|---|
| Brand | ASC / SCI |
| Figure | 36F1 |
| Fitting Class | Class 125 |
| Material | Cast Bronze |
| Bronze Alloy | UNS C83600 |
| Material Standard | ASTM B62 |
| Configuration | 45° Elbow |
| Connection | Female NPT x Female NPT |
| Fitting Standard | AWWA C800 |
| Dimensional Standard | ASME B16.15 |
| Thread Standard | ASME B1.20.1 |
| Testing | 100% Air Tested |
| Listing | UL Listed |
Construction Details
FIG 36F1 elbows are manufactured from cast bronze conforming to ASTM B62, UNS Alloy C83600. The bronze construction provides corrosion resistance for compatible piping applications.
Fitting dimensions conform to ASME B16.15, while the female NPT connections conform to ASME B1.20.1. SCI also identifies this bronze fitting family as conforming to AWWA C800.
The 45-degree configuration provides a more gradual directional change than a 90-degree elbow and can be used individually or in combination with other fittings to route threaded piping.
Design & Typical Applications
45° Elbow Design
- 45-degree directional change
- Female NPT both ends
- Cast bronze construction
- Class 125 fitting design
- Compact threaded connection
Typical Applications
- Steam piping
- Water systems
- Gas and oil piping
- Air and pneumatic systems
- Marine applications
Installation & Selection Considerations
- Confirm the required pipe size.
- Verify female NPT connections.
- Use compatible thread sealant.
- Confirm media compatibility.
- Verify system requirements.
Use the supplied SCI Bronze Fittings document to review FIG 36F1 item numbers, connection information, and product details when selecting the correct 125# bronze threaded 45° elbow.
Need Help Selecting a 125# Bronze Threaded 45° Elbow?
Need help confirming pipe size, NPT connections, bronze material requirements, or compatibility with your piping application? The GetPipe.com Team can help.
Frequently Asked Questions
What is the figure number for this bronze 45° elbow?
The ASC / SCI 125# Bronze Threaded 45° Elbow is FIG 36F1.
What does a 45° elbow do?
It changes the direction of a threaded piping run by 45 degrees.
What material is FIG 36F1 made from?
The fitting is manufactured from cast bronze conforming to ASTM B62, UNS Alloy C83600.
What connections does this elbow have?
FIG 36F1 uses female NPT threaded connections on both ends.
What standards apply to this bronze fitting?
The fitting conforms to AWWA C800, with dimensions to ASME B16.15 and NPT threads to ASME B1.20.1.
Is this bronze elbow UL Listed?
Yes. SCI identifies this Class 125 bronze fitting family as UL Listed and 100% air tested.
Is this fitting lead-free for potable water service?
No. The C83600 bronze construction is not identified as lead-free. Use an appropriate lead-free fitting where potable-water compliance is required.
What should I confirm before ordering?
Confirm nominal pipe size, female NPT connections, material compatibility, and the requirements of the intended piping system.
Important Ordering & Installation Notes
- Confirm the required pipe size.
- Verify NPT thread compatibility.
- Use suitable thread sealant.
- Do not assume lead-free compliance.
- Confirm intended system service.
