Dixon
1240404K - Female NPSM Swivel x Hose Barb Ball Seat
- SKU:
- 1240404K
- Availability:
- Usually Ships Same Day
- Weight:
- 0.05 LBS
Description
Engineered to connect.
Built to perform.
1240404K — Female NPSM Swivel x Hose Barb Ball Seat 1240404K connects hose to a female NPSM swivel with a ball seat through a barbed shank, with hose retention selected to suit the complete hose-and-fitting assembly. The specification gives 4 barbs and a .97-inch barb length.
Match both ends before choosing retention
Choose the fitting by hose size and connection geometry first, then check its barb dimensions and required retention hardware. The thread, seat or branch arrangement must match the actual mating parts in the installation.
Selection & Installation
Connection and barb dimensions: The listed stem length is 1.39 inches and nut length is .53 inches. Match the hose inside diameter and mating connection, allowing clearance for the swivel and selected retention hardware.
Hose retention: Dixon specifies hose clamps or crimped ferrules for these standard hose fittings. Select the retention method for the actual hose construction, fitting dimensions and intended service rather than treating the barb alone as securement.
WARNINGThis product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Product documents
3 PDF REFERENCES
Ask Willy: Need help choosing the right Dixon part?
Need help confirming 1240404K? Share the connection sizes, mating part details and service conditions with us so the correct fitting can be checked before you place an order.
Frequently Asked Questions
Does the hose barb need retention hardware?
Yes. Dixon specifies hose clamps or crimped ferrules for these standard hose fittings. The appropriate hardware depends on the actual hose, fitting dimensions and intended application.
What dimensions should I compare before ordering?
Check hose inside diameter, the opposite connection size and the listed barb dimensions. Also allow space for the selected retention hardware and the planned hose routing.
Can I determine the service rating from the fitting name?
No. Confirm the documented limits for the exact fitting, hose and retention method. Material, temperature and media compatibility must be checked for the assembled connection before service.
