Dixon
1240302K - Female NPSM Swivel x Hose Barb Ball Seat
- SKU:
- 1240302K
- Availability:
- Usually Ships Same Day
- Weight:
- 0.03 LBS
Description
Engineered to connect.
Built to perform.
1240302K — Female NPSM Swivel x Hose Barb Ball Seat 1240302K connects hose to a female NPSM swivel with a ball seat through a barbed shank, with hose retention selected to suit the complete hose-and-fitting assembly. The specification gives 3 barbs and a .75-inch barb length.
Small part.
Big connection.
Dixon 1240302KNPSM Ball-Seat Hose Swivel
Match the female thread and ball seat before choosing hose and retention hardware.
Selection & Installation
Dimensions and fit: The listed stem length is 1.08 inches and nut length is .44 inches. Match hose ID and the mating connection, allowing clearance for the swivel and retention hardware.
Hose retention: Dixon specifies hose clamps or crimped ferrules. Select hardware for the actual hose and fitting, then verify the complete assembly’s suitability for the intended service.
WARNINGThis product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Product documents
3 PDF REFERENCES
Ask Willy: Need help choosing the right Dixon part?
Need help confirming 1240302K? Share the connection sizes, mating part details and service conditions with us so the correct fitting can be checked before you place an order.
Frequently Asked Questions
Does the hose barb need retention hardware?
Yes. Dixon specifies hose clamps or crimped ferrules for these standard hose fittings. The appropriate hardware depends on the actual hose, fitting dimensions and intended application.
What dimensions should I compare before ordering?
Check hose inside diameter, the opposite connection size and the listed barb dimensions. Also allow space for the selected retention hardware and the planned hose routing.
Can I determine the service rating from the fitting name?
No. Confirm the documented limits for the exact fitting, hose and retention method. Material, temperature and media compatibility must be checked for the assembled connection before service.
