Wal-Rich
1-1/4" CTS Con-Stab Riser/Tool Item
- SKU:
- 2888027
- Availability:
- Allow 3 to 4 days to ship
- Weight:
- 0.36 LBS
- Note:
- CON-STAB FITTINGS REQUIRE CHAMFER TOOL
Description
1-1/4" CTS Con-Stab® Chamfer Tool – .090 Wall
The Wal-Rich 1-1/4" CTS Con-Stab® Chamfer Tool is designed to prepare compatible polyethylene pipe before installation into Continental Con-Stab® ID Seal fittings.
This tool is matched specifically to 1-1/4" CTS pipe with a .090 wall, helping ensure the correct pipe-end preparation for the intended Con-Stab® fitting system.
Product Overview
Proper chamfering prepares the outside edge of polyethylene pipe before insertion into a Con-Stab® fitting. Wal-Rich specifies matching the chamfer tool to the exact pipe configuration being installed.
Product #2888027 is identified for 1-1/4" CTS pipe with a .090 wall. Confirm both pipe size and wall before beginning installation.
Product Highlights
- For Con-Stab® ID Seal fittings
- 1-1/4" CTS pipe size
- .090 wall
- Wal-Rich product #2888027
- Pipe-specific chamfer tool
- Made for Continental fitting applications
Match Pipe Size & Wall
Wal-Rich lists product #2888027 for 1-1/4" CTS pipe with a .090 wall. Do not substitute a chamfer tool intended for IPS pipe, another CTS size, or a different wall configuration.
Technical Specifications
| Manufacturer | Wal-Rich Corporation |
|---|---|
| Manufacturer Part # | 2888027 |
| Product Type | Con-Stab® Chamfer Tool |
| Pipe Size | 1-1/4" CTS |
| Wall | .090 |
| Fitting System | Continental Con-Stab® ID Seal |
| Selection Basis | Pipe Size and Wall |
Confirm the Pipe
Verify that the polyethylene pipe is 1-1/4" CTS with a .090 wall before using this tool. Chamfer tools are matched to specific pipe configurations.
Follow the Arrow
Turn the chamfer tool in the direction shown by the arrow printed on the tool. This helps produce a clean, even chamfer on the pipe end.
Prepare an Even Chamfer
Proper pipe preparation helps the pipe enter the compatible Con-Stab® fitting as intended. Inspect the pipe end before proceeding with fitting insertion.
Match the Continental System
Wal-Rich identifies these chamfer tools for Continental fitting applications. Use a Continental chamfer tool with the corresponding Continental fitting system.
Availability & Ordering
Allow 1–2 Days to Ship. Confirm 1-1/4" CTS pipe and .090 wall before ordering to ensure the chamfer tool matches the intended application.
Wal-Rich Product Documentation
Review the official Wal-Rich catalog for the Con-Stab® chamfer-tool selection chart and manufacturer guidance.
Wal-Rich 2026 Catalog PDFFrequently Asked Questions
▸ What pipe does Wal-Rich #2888027 match?
Wal-Rich lists product #2888027 for 1-1/4" CTS pipe with a .090 wall.
▸ Is this an IPS chamfer tool?
No. Product #2888027 is identified by Wal-Rich as a 1-1/4" CTS chamfer tool.
▸ Does the wall thickness matter?
Yes. Wal-Rich's chamfer-tool chart identifies the pipe configuration by size and either CTS wall or SDR. This tool is listed for a .090 wall.
▸ Which direction should the chamfer tool be turned?
Follow the arrow printed on the tool and turn it in the indicated direction for a clean, even chamfer.
▸ Can I use this with another manufacturer's fitting?
Wal-Rich's catalog directs users to use a Continental chamfer tool with a Continental fitting.
▸ Where can I verify the Wal-Rich part number?
Product #2888027 is listed in the Wal-Rich Con-Stab® chamfer-tool chart in the official 2026 Wal-Rich catalog.
Send us the pipe size, CTS wall, or Wal-Rich product number and the GetPipe.com team can help verify the correct chamfer tool.
Wal-Rich Corporation supplies plumbing, heating, hardware, and industrial products through wholesale distribution. For Con-Stab® installations, match the chamfer tool to the pipe size and wall or SDR shown in the applicable Wal-Rich manufacturer documentation.
