Spears
Schedule 80 PVC FKM Union 2000 (S x FPT)
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Schedule 80 PVC FKM Union 2000 (S x FPT)
Schedule 80 PVC FKM Union 2000 (S x FPT) provides a removable connection between compatible PVC pipe and a male-threaded component using socket and female pipe-threaded connections. The socket end receives appropriately sized compatible PVC pipe, while the FPT end accepts a compatible male pipe thread.
The S x FPT union configuration combines socket and female-threaded connection interfaces with FKM sealing material. Selection should account for nominal size, Schedule 80 PVC compatibility, adjoining components, FKM compatibility, joining requirements, thread alignment, piping support, and available service clearance.
Product Highlights
- PVC construction
- FKM sealing material
- Schedule 80 design
- Union 2000 configuration
- Socket x FPT connections
- Provides a removable piping connection
- Combines socket and female-threaded interfaces
- Allows connected components to be separated without cutting adjoining piping
Technical Specifications
| Product Type | Union |
|---|---|
| Material | PVC |
| Schedule | Schedule 80 |
| Connection | Socket x Female Pipe Thread (S x FPT) |
| Connection Count | Two |
| Fitting Configuration | Union 2000 |
| Socket Interface | Compatible PVC Pipe |
| Threaded Interface | Compatible Male Pipe Thread |
| Sealing Material | FKM |
| Connection Style | Socket x Female Threaded |
| Joining Method | Compatible PVC Solvent-Cement Joining x Threaded Connection |
| Primary Function | Provide a Removable Connection Between Compatible PVC Pipe and Male-Threaded Components |
Union Design
The union configuration provides a connection point that can be separated when access to adjoining piping or equipment is required. This can simplify servicing or piping changes because the union can be opened without cutting the connected piping.
The union should be positioned where there is adequate room for assembly, disassembly, and future access. Adjoining components should be aligned and supported so the union is not relied upon to correct offsets or carry unnecessary mechanical loads.
Socket & FPT Connections
The socket connection receives appropriately sized compatible PVC pipe, while the FPT connection accepts an appropriately sized compatible male pipe thread. This S x FPT arrangement provides two different connection interfaces around the removable union body.
The socket surfaces should be prepared for the applicable PVC solvent-cement joining procedure, while the threaded component should be started carefully and kept properly aligned. Compatible joining and thread-sealing materials should be selected for their respective connection types.
Schedule 80 PVC Integration
The Schedule 80 PVC construction allows the union to integrate into compatible Schedule 80 PVC piping arrangements requiring a socket-to-threaded transition. Matching the nominal size and both connection interfaces to the adjoining components helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete piping system rather than the schedule designation alone. Intended service conditions, adjoining materials, connection compatibility, sealing materials, joining materials, piping support, and applicable practices should all be considered during fitting selection.
FKM Sealing Configuration
The FKM sealing material is part of the union sealing configuration and should be evaluated for compatibility with the intended service. Seal-material selection can depend on the conveyed media, temperature, operating conditions, and other application requirements.
The sealing surfaces and FKM seal should be inspected before assembly and kept free from damage or contamination. The union should be assembled evenly so the sealing components remain correctly positioned during installation and future servicing.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the S x FPT arrangement.
- Check Schedule 80 PVC compatibility.
- Confirm FKM suitability for the application.
- Allow adequate clearance for union servicing.
Our PVC fitting specialists can help review your nominal size, Schedule 80 requirements, S x FPT configuration, FKM sealing material, adjoining PVC pipe, mating male-threaded component, joining requirements, piping alignment, support requirements, and available service clearance before you order.
Frequently Asked Questions
What is a Schedule 80 PVC FKM Union 2000 used for?
It provides a removable connection between compatible PVC pipe and a male-threaded component using socket and female-threaded connections.
What does S x FPT mean?
S x FPT identifies a socket connection at one end and a female pipe-threaded connection at the other.
What connects to the socket opening?
The socket opening receives appropriately sized compatible PVC pipe for the applicable solvent-cement joining procedure.
What does FKM identify?
FKM identifies the specified sealing material used in the union and should be checked for compatibility with the intended application.
Why use a union connection?
A union provides a connection point that can be separated for access or servicing without requiring the adjoining piping to be cut.
What should I confirm before ordering?
Confirm the nominal size, S x FPT arrangement, Schedule 80 PVC compatibility, FKM sealing requirements, and adjoining components.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm the nominal connection size.
- Verify FKM compatibility for the application.
- Start the threaded component carefully by hand.
- Allow clearance for future union servicing.
