Spears
Schedule 40 PVC Sweep 90° Elbow (SOC x SPG)
- Availability:
- Usually Ships Same Day
- Weight:
- 0.00 LBS
Description
Schedule 40 PVC Sweep 90° Elbow (SOC x SPG)
Schedule 40 PVC Sweep 90° Elbow (SOC x SPG) provides a sweeping 90-degree change in direction for compatible Schedule 40 PVC piping using one socket connection and one spigot connection. The socket end receives appropriately sized compatible PVC pipe, while the spigot end fits into an appropriately sized compatible receiving socket.
The sweep 90° elbow configuration combines a gradual right-angle transition with SOC x SPG connections in one fitting. Selection should account for nominal size, Schedule 40 PVC compatibility, socket and spigot positions, required direction change, adjoining pipe and fitting connections, joining requirements, piping alignment, and available installation clearance.
Product Highlights
- PVC construction
- Schedule 40 design
- 90° sweep configuration
- Socket x spigot connections
- Provides a sweeping right-angle transition
- Connects compatible PVC pipe and socket fittings
- Designed for compatible PVC solvent-cement joining
- Combines a 90° sweep with SOC x SPG connections in one fitting
Technical Specifications
| Product Type | Sweep Elbow |
|---|---|
| Material | PVC |
| Schedule | Schedule 40 |
| Connection | Socket x Spigot (SOC x SPG) |
| Connection Count | Two |
| Fitting Configuration | 90° Sweep Elbow |
| Socket Interface | Compatible PVC Pipe |
| Spigot Interface | Compatible Receiving Socket |
| Connection Style | Socket x Spigot |
| Joining Method | Compatible PVC Solvent-Cement Joining |
| Direction Change | 90° |
| Primary Function | Provide a Sweeping 90° Transition in Compatible Schedule 40 PVC Piping |
90° Sweep Elbow Design
The 90° sweep configuration redirects compatible PVC piping through a sweeping right-angle transition rather than a compact elbow profile. The fitting combines the directional change with socket and spigot connection styles for integration into compatible piping layouts.
The intended sweep orientation should be established before permanent joining so the adjoining components follow the required piping route. Planning the fitting position in advance also helps coordinate pipe lengths, nearby fittings, piping supports, and the installation space required for the sweep.
Socket & Spigot Connections
The socket connection receives appropriately sized compatible PVC pipe, while the spigot connection fits into an appropriately sized compatible receiving socket. This SOC x SPG arrangement allows the sweep elbow to connect between compatible PVC pipe and a socket-style fitting or component.
The mating surfaces should be prepared using the appropriate PVC solvent-cement joining procedure for the installation. Compatible joining materials, proper insertion, correct alignment, and planned sweep orientation help establish the connections without placing unnecessary stress on the fitting or adjoining piping.
Schedule 40 PVC Integration
The Schedule 40 PVC construction allows the sweep elbow to integrate into compatible Schedule 40 PVC piping arrangements requiring a 90-degree directional transition. Matching the nominal size and each connection style to the adjoining pipe or fitting helps maintain the intended piping configuration.
Application suitability should be evaluated using the requirements of the complete piping system rather than the schedule designation alone. Intended service conditions, adjoining materials, connection compatibility, joining materials, installation environment, piping support, and applicable practices should all be considered during fitting selection.
Sweeping Right-Angle Transition
A Schedule 40 PVC Sweep 90° Elbow provides a sweeping directional transition where the piping route must turn through 90 degrees. The SOC x SPG arrangement combines two connection interfaces within the same fitting while maintaining the required right-angle routing change.
Installation planning should consider the sweep profile, socket insertion, spigot insertion, adjoining component alignment, nearby fittings, available clearance, and piping support. Connected components should align naturally with the elbow so the fitting is not relied upon to correct offsets or support improperly positioned piping.
Installation & Selection Considerations
- Confirm the nominal size.
- Verify the required 90° sweep.
- Check Schedule 40 PVC compatibility.
- Identify the socket and spigot positions.
- Allow adequate clearance for the sweep configuration.
Our PVC fitting specialists can help review your nominal size, Schedule 40 requirements, SOC x SPG configuration, required 90° sweep, adjoining PVC pipe and socket fitting, connection orientation, joining requirements, piping layout, support requirements, and available installation clearance before you order.
Frequently Asked Questions
What is a Schedule 40 PVC Sweep 90° Elbow used for?
It provides a sweeping 90-degree change in direction in compatible Schedule 40 PVC piping using socket and spigot connections.
What does SOC mean?
SOC identifies a socket-style connection designed to receive appropriately sized compatible PVC pipe.
What does SPG mean?
SPG identifies a spigot-style connection designed to fit into an appropriately sized compatible receiving socket.
How much does this sweep elbow change the piping direction?
The sweep elbow redirects the compatible piping arrangement through a 90-degree change in direction.
What connects to each end of the sweep elbow?
The socket end receives compatible PVC pipe, while the spigot end fits into an appropriately sized compatible receiving socket.
How are the socket and spigot connections assembled?
The compatible PVC components are joined using the appropriate PVC solvent-cement preparation and assembly procedure for each connection.
Important Ordering & Installation Notes
- Inspect both connections before use.
- Confirm the nominal connection size.
- Prepare each mating surface correctly.
- Set the sweep orientation before cementing.
- Use compatible PVC joining materials throughout.
