Pipe Hangers and Supports

Fig. 23L Malleable Iron C-Clamp With Locknut Empire’s 23L Malleable Iron C- Clamp is designed for attaching hanger rod to the bottom flange of a beam. Empire Figure 23L - Malleable Iron C-Clamp with Locknut Sumbittal PDF

Copper Tube Clevis Hanger 1/2" through 6" CTS Carbon Steel / Epoxy Coated For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Max Load: 6" 480 lbs. Product Submittal / Data Sheet PDF...

1" HAP Pipe Hanger - Model PL-1111-1 Fits: 1" CPVC, PEX and Copper and 3/4" PVC Pipe  The innovative – hold and protect – hap system pipe hanger is designed to securely hold 1” CPVC, PEX, copper pipe and 3/4″ PVC pipe. This...

258 Pipe Saddle Support Stanchion type support for stationary pipe. Sizes 4" through 12" are Cast Iron. Sizes 14" through 36" are Carbon Steel. Sizes 4" through 12" are available in Carbon Steel by special request only. Plain or Zinc Plated (Hot-Dip...

192 Adjustable Pipe Saddle Support Stanchion type support for stationary pipe where vertical adjustment is required. Size Range: 2" through 12" Product Submittal / Data Sheet PDF Anvil Pipe Hangers & Supports Submittal Catalog PDF

259 Pipe Saddle Support With U-Bolt Cast iron stanchion saddle with steel yoke and nuts. 14" through 36" carbon steel saddle with steel yoke. 4" through 12" steel saddle available on special request. Stanchion type support with additional stability...

265 Adjustable Pipe Saddle Support With U-Bolt Stanchion type support where vertical adjustment is required, plus the additional stability provided by U-bolt attachment to pipe. Cast iron saddle, steel yoke and nuts, steel locknut nipple and special cast...

264 Adjustable Pipe Saddle Support Stanchion type support where vertical adjustment of stationary pipe is required. Complete Set Size Range: 2-1/2" through 36" Product Submittal / Data Sheet PDF Anvil Pipe Hangers & Supports Submittal Catalog PDF

271 Pipe Roll Stand For support of pipe where longitudinal movement due to expansion and contraction may occur but where no vertical adjustment is required. Size Range: 2" through 42" Cast Iron Roll and Stand Product Submittal / Data Sheet PDF Anvil...

175 Roller Chair For support of pipe where longitudinal movement due to expansion and contraction may occur, but where no vertical adjustment is required. Size Range: 2" through 30" Cast Iron Roll, Steel Chair, Roll Rod, Bolts and Hex Nuts Product...

171 Single Pipe Roll For suspension of pipe from two rods where longitudinal expansion and contraction may occur. Size Range: 1" through 30" Cast Iron Roll and Sockets, Steel Roll Rod Product Submittal / Data Sheet PDF Anvil Pipe Hangers & Supports...

181 Adjustable Steel Yoke Pipe Roll For suspension of pipe from a single rod where longitudinal movement may occur because of expansion or contraction.  Size Range: 2-1/2" through 24" Cast Iron Roll, Carbon Steel Yoke, Roll Rod and Hex Nuts Product...

610 Ceiling Plate 3/8" Ceiling plate mounts on the underside of wood or steel to support up to 2" NPS horizontal piping.  Installation: Mount on the underside of wood or steel using the fasteners listed in NFPA 13, the fasteners detailed in the...

153 Pipe Hanger Flange Recommended for suspension of pipe lines or conduit from level ceilings. Flange size 3/8" has two holes, sizes 1/2", 5/8", and 3/4" have three holes. Provides vertical adjustment up to 1" Good Appearance Product Submittal / Data...

CT-128R Rod Threaded Ceiling Flange Recommended for attachment to wood beams or ceiling. Sizes 3/8" and 1/2" Material Malleable Iron Copper Plated Product Submittal / Data Sheet PDF Anvil Pipe Hangers & Supports Submittal Catalog PDF

395 Cast Iron Ceiling Plate Gives finished appearance where pipe enters ceiling. Sizes 1/2" to 4" furnished with one machine screw; sizes 5" to 8", two machine screws. Sizes 1/2" through 8" Material Cast Iron Plain or Zinc Plated Product Submittal /...

128R Ceiling Flange, Rod Threaded Recommended for attachment to wood beams or ceiling. Sizes 3/8" and 1/2" Material Malleable Iron Plain or Zinc Plated Product Submittal / Data Sheet PDF Anvil Pipe Hangers & Supports Submittal Catalog PDF

86 C-Clamp w/ Set Screw & Lock Nut Recommended for attachment to “W” and “M” beams where thickness of flange Z does not exceed 0.75". When clamp is used with Fig. 89 retaining clip, flange thickness may not exceed 0.62"...

14 Adjustable Side Beam Clamp Recommended for supporting pipe from the bottom flange of beams. Size 3/8" through 5/8" Plain or Zinc Plated Product Submittal / Data Sheet PDF Anvil Pipe Hangers & Supports Submittal Catalog PDF

133 Standard Duty Beam Clamp Clamp centers the load on beam to prevent distortion Note: Spacer is furnished for use with Fig. 290 weldless eye nuts. Spacer may be removed for use with Fig 278 eye rods. Plain or Hot-Dip Galvanized with Zinc Plated...

226 Truss Bracket or installation on the top chord of a steel web joist. Web thickness must be between 3/16" and 3/8" thick. Joist must be between 5" and 7" wide. For installation with Anvil Fig 202, 206, 207, & 551 brackets Rod Size 1/2" Material...

95 C-Clamp w/ Locknut Designed for fastening flange of “W” and “M” beam. Bottom hole tapped to accommodate hanger rod. Plain or Zinc Plated Product Submittal / Data Sheet PDF Anvil Pipe Hangers & Supports Submittal Catalog...

134 Heavy Duty Beam Clamp Clamp centers the load on beam to prevent distortion. Two half-clamps, pipe spacer and bolt with nut assembled. Note: Spacer is furnished for use with Fig. 290 weldless eye nuts. Spacer may be removed for use with Fig 278 eye...

94 Wide Throat Top Beam Clamp The Anvil Wide Throat Top Beam Clamp has a ductile iron body with hardened steel cup point set screw and locknut. Clamps to bar joists or top flanges. UL Listed. Recommended for use under roof installations with bar joist...

93 Universal C-type Clamp Wide Throat Recommended for use under roof installations with bar joist type constructions, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the edge...

92 Universal C-type Clamp, Standard Throat Recommended for use under roof installations with bar joist type construction, or for attachment to the top or bottom flange of structural shapes where the vertical hanger rod is required to be offset from the...

CT-121 Copper Tubing Riser Clamp Recommended for support and steadying of copper tube risers, either insulated or non-insulated. This product is not intended for use with hanger rods. For support and steadying of copper tubing risers. Product Submittal...

261 Extension Pipe or Riser Clamp For support of stationary steel pipe risers, cast iron pipe or conduit. This product is not intended for use with hanger rods. For this application refer to Fig. 40 Riser Clamp. Clamp is fitted and bolted preferably...

67 Pipe or Conduit Hanger Can be suspended by hanger rod or attached to wall. “T” slot in hanger permits side bolt to be installed after installation and setting of pipe. Strap and bolt with nut – assembled. Finish Zinc Plated Product...

CT-65 Light Adjustable Clevis Hanger Copper Plated Recommended for suspension of non-insulated, stationary copper tube. Adjustment may be made either before or after tubing is in place without temporary support of pipe. Hanger rod and nuts may be locked...

65 Light Adjustable Clevis Hanger Recommended for suspension of stationary pipe or conduit. An economical attachment for light duty service. Product Submittal / Data Sheet PDF Anvil Pipe Hangers & Supports Submittal Catalog PDF Pipe Chart: Common...

260 Adjustable Clevis Hanger Recommended for the suspension of stationary pipe lines. Design has yoke on outside of lower U-strap so yoke cannot slide toward center of bolt, thus bending of bolt is minimized. Sizes 5" and up have rod and two nuts instead...

Fig. 427 Adjustable Pipe Saddle Support With U-Bolt Finish: Plain Steel Empire Figure 427 – Adjustable Pipe Saddle Support with U-Bolt Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 426 Adjustable Pipe Saddle Support Finish: Plain Steel Empire Figure 425 – Adjustable Pipe Saddle Support Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 425 Pipe Saddle Support With U-Bolt Finish: Plain Steel Empire Figure 425 – Pipe Saddle Support Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 422 Adjustable Pipe Support Finish: Plain Steel Empire Figure 422 – Ajustable Pipe Support Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 421 Adjustable Pipe Saddle Support With Threaded Coupling Finish: Plain Steel Empire Figure 421 – Ajustable Pipe Saddle Support with Threaded Coupling Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 420 Pipe Saddle Support Finish: Plain Steel Empire Figure 420 – Pipe Saddle Support Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 280S Adjustable Pipe Roll Stand Finish: Plain Steel Empire Figure 280S – Adjustable Pipe Roll Stand Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Clevis Hanger with Insulation Saddle System 260R ISS Recommended for the suspension of stationary insulated chilled or hotwater pipe lines.  V-Block design cradles pipe through out the entire erection process. Clevis bolt spacer included as standard...