Hangers & Supports

Fig. 212 Standard Steel Pipe Clamp Empire Figure 212 Standard Steel Pipe Clamp Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

H-Block Rooftop Pipe Support Block The HBM-Support Series is UV resistant and suitable for installation on most types of roofing material or other flat surfaces. A cost-effective method for mounting and supporting single pipe applications without losing...

Fig. 751-RT Rooftop Support Block The rubber rooftop support block allows you to connect channel struts with through bolts on each end of the block for added strength and stability. Screw type fasteners are used to attach struts and other applicable...

J-Hanger 1/2" through 4" NPS Electro-Galvanized Max Temperature: 450° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Product Submittal / Data Sheet PDF Light Duty Commercial...

Fig. 8100 Strut Nut With Regular Spring Strut Channel Strut Nut: Great for attaching hanger rod or other accessories from strut. Empire Series 8000 Submittal PDF

Light Duty Adjustable Clevis Hanger 1/2" through 4" NPS Electro-Galvanized Max Temperature: 450° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Product Submittal / Data...

Fig. 8000 Strut Nut W/O Spring Zinc Plated Strut Channel Strut Nut: Great for attaching hanger rod or other accessories from strut. Empire Series 8000 Submittal PDF

Adjustable Clevis Hanger 1/2" through 6" NPS Electro-Galvanized Max Temperature: 450° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Max Load: 6" 480 lbs. Product Submittal / Data...

Fig. 50 Standard Riser Clamp Empire’s Fig. 50 Standard Riser Clamp is designed for supporting and stabilizing vertical pipe runs. Plastic coated riser clamps are completely plastic coated with zinc plated hardware. The plastic coating prevents pipe...

Copper Ring Hanger 1/2" through 6" CTS Carbon Steel - Epoxy Coated Max Temperature: 450° F For the suspension of stationary Copper Tube Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Max Load: 6" 480 lbs. Product...

Fig. 95 Offset Pipe Clamp Plain Steel Finish Empire Figure 95 Offset Pipe Clamp Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

1" HAP Pipe Hanger - Model PL-1111-1 Fits: 1" CPVC, PEX and Copper and 3/4" PVC Pipe  The innovative – hold and protect – hap system pipe hanger is designed to securely hold 1” CPVC, PEX, copper pipe and 3/4″ PVC pipe. This...

Two-Hole Pipe Strap 1/4" through 4" Carbon Steel - Electro galvanized Max Temperature: 450° F For the suspension of stationary NPS Steel Pipe. See Chart below for Max Loads Product Submittal / Data Sheet PDF Light Duty Commercial Hangers...

Riser Clamp 1/2" through 6" NPS Carbon Steel - Electro Galvanized Max Temperature: 120° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Product Submittal / Data Sheet PDF...

Fig. 53B Angle Bracket Designed for attaching hanger rod to the side of beams or walls. Domestically Manufactured Finish Plain Carbon Steel Empire Figure 53 Angle Bracket Submittal PDF

6" Lockable HAP Pipe Hanger - Model PL-1111-V60 Fits: 6" PVC, Copper, Stainless, Black and Galvanized Pipe The innovative – hold and protect – hap system pipe hanger with locking system is designed to securely hold 6” PVC, copper,...

Fig. 189 Double Bolt Pipe Clamp Designed for the suspension of insulated pipe lines. Normally used with weldless eye nut, figure #13. Empire Figure 189 Double Bolt Pipe Clamp Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 428KT Adjustable Pipe Saddle Support Kit Empire Fig. 428KT Adjustable Pipe Saddle Support Kit Submittal PDF Empire Fig. 428KT, 429KTU, 430KTSF, 431KTSF Installation Guide PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Stainless Steel Clevis Hanger 1" through 8" NPS 304 Stainless Steel Max Temperature: 650° F For support of stationary steel pipe or conduit. Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Max Load: 6" 480 lbs. Max Load:...

Fig. 7510-RTE Rooftop Support Block W/Adjustable Elevated Strut The rubber rooftop support block allows you to connect channel struts with through bolts on each end of the block for added strength and stability. Screw type fasteners are used to attach...

Felted J-Hanger 1/2" through 4" CTS Carbon Steel and felt with adhesive backing Max Temperature: 120° F For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Product Submittal / Data...

Copper Plated Two-Hole Pipe Strap 1/4" through 4" CTS Carbon Steel - Epoxy Coated Max Temperature: 450° F For the suspension of stationary Copper Tube. See Chart below for Max Loads Product Submittal / Data Sheet PDF Light Duty Commercial...

Copper Tube Clevis Hanger 1/2" through 6" CTS Carbon Steel / Epoxy Coated For the suspension of stationary pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Max Load: 6" 480 lbs. Product Submittal / Data Sheet PDF...

4" Lockable HAP Pipe Hanger - Model PL-1111-V40 Fits: 4" PVC, Copper, Stainless, Black and Galvanized Pipe The innovative – hold and protect – hap system pipe hanger with locking system is designed to securely hold 4” PVC, copper,...

Stainless Steel Band Hanger 1/2" through 8" NPS 316 Stainless Steel Max Temperature:650° F For the suspension of stationary steel pipe Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Max Load: 6" 480 lbs. Max Load: 8"...

3/4" HAP Pipe Hanger - Model PL-1111-3/4  Fits: 3/4" CPVC, PEX and Copper and 1/2" PVC Pipe  The innovative – hold and protect – hap system pipe hanger is designed to securely hold 3/4” CPVC, PEX, copper pipe and 1/2″...

Fig. 97 Extended Pipe Clamp Plain Steel Finish Empire Figure 97 Extended Pipe Clamp Submittal PDF Pipe Chart: Common Diameters & Wall Thicknesses PDF

Fig. 429KTU Adjustable Pipe Saddle Support with U-Bolt Kit Empire Fig. 429KTU Adjustable Pipe Saddle Support with U-Bolt Kit Submittal PDF Empire Fig. 428KT, 429KTU, 430KTSF, 431KTSF Installation Guide PDF Pipe Chart: Common Diameters &...

Light Duty DWVG Hanger 1-1/2" through 4" NPS Carbon Steel - Electro Galvanized Pipe hanger or restraint for DWV pipe. Allows for easy adjustability of elevation Perfect for use with ABS or PVC plastic DWV pipe Product Submittal / Data Sheet PDF Light...

Copper Tubing Riser Clamp 1/2" through 6" CTS Carbon Steel - Epoxy Coated Max Temperature: 450° F For the suspension of stationary Copper Tube Max Load: 1/2" - 2-1/2" 150 lbs. Max Load: 3" 200 lbs. Max Load: 4" 250 lbs. Max Load: 6" 480 lbs. Product...

Fig. 422U Plain Adjustable Pipe Support W/ U-Bolt - Plain Steel Designed to be used in conjunction with a standard pipe and flange at the base to suppor piping where an overhead supporting member is not available. The stem is threaded the full length...

4" HAP Pipe Hanger - Model PL-1111-40 Fits: 4" PVC, Copper, Stainless, Black and Galvanized Pipe The innovative – hold and protect – hap system pipe hanger is designed to securely hold 4” PVC, copper, stainless and black pipe. This...

3" Lockable HAP Pipe Hanger - Model PL-1111-V30  Fits: 3" PVC, Copper, Stainless, Black and Galvanized Pipe The innovative – hold and protect – hap system pipe hanger with locking system is designed to securely hold 3” PVC, copper,...

Fig. 431KT Adjustable Bolt on Flange Support Kit Empire Fig. 431KT Adjustable Bolt on Flange Support Kit Submittal PDF Empire Fig. 428KT, 429KTU, 430KTSF, 431KTSF Installation Guide PDF 150# & 300# Flange Dimensional Specifications PDF Pipe...

3/4" Back of Stud HAP Pipe Hanger - Model PL-1111-B3/4  Fits: 3/4" CPVC, PEX, Copper and 1/2" PVC Pipe  The innovative – hold and protect – hap system pipe hanger is designed to securely hold 3/4” CPVC, PEX, copper pipe and...

Stainless Steel U-Bolt 1" through 8" NPS 316 Stainless Steel U-Bolt and four (4) hex nuts. Max Temperature: 450°F / 650°F Recommended for support, or guide of heavy loads; often employed in power, process plant and marine service. Product...

1/2" Back of Stud HAP Pipe Hanger - Model PL-1111-B1/2 Fits: 1/2" CPVC, PEX and Copper Pipe  The innovative – hold and protect – hap system pipe hanger is designed to securely hold 1/2” PVC, CPVC, copper pipe and PEX tubing. This...

1/2" HAP Pipe Hanger - Model PL-1111-1/2  Fits: 1/2" CPVC, PEX and Copper Pipe  The innovative – hold and protect – hap system pipe hanger is designed to securely hold 1/2” PVC pipe and PEX tubing. This easy-to-install hanger...

2" HAP Pipe Hanger - Model PL-1111-23 Fits: 2" PVC and 2-1/2" Copper Pipe The innovative – hold and protect – hap system pipe hanger is designed to securely hold 2” PVC pipe and 2-1/2” copper pipe. This easy-to-install hanger...

Fig. 153 Side Beam Clamp Designed for mounting to sides of wood beams using drive screws. Bottom hole is tapped for rod. Empire Figure 153 Side Beam Clamp Submittal PDF