Argco

FIRE SPRINKLER HEAD PROTECTIVE CAP Lightweight plastic tube fits over Semi-Recessed Escutcheon Inner Ring to protect from damage or paint 1-15/16 dia x 2-13/16 long The Escutcheon Head Protector Protective Cap is designed to safeguard fire sprinkler...

CPVC Standoff No-Block 2 Hole Strap For mounting CPVC pipe to wood Flared edges help protect CPVC Galvanized steel Supplied with #10 hex head cap screws Complies with the static load requirements of NFPA® 13 ...

Eye Socket Steel Galvanized Model 037 Steel Eye Socket - 3/8" 3/8" hole for lag screw and two additional 1/4" screw holes Size Range: 3/8" rod size Finish: Electro-Galvanized Structural attachment used to join hanger rod to a structure. Click here for...

Model 020 Rod Swivel Attachment Used as a branch line restraint for structural attachment. Designed to be used with PHD Model 350 Beam Clamp

Sold in box quantities of 12 Made of tough, durable plastic Non-breakable 100 % Rust Proof Split design allows you to simply bend open, wrap around pipe, and snap closed. Click here for Technical Data ...

CPVC 90° Sidemount Two-Hole Strap 100 PER BOX 9 LBS Top or bottom beam installation Can be used as a restrainer from upward movement of the sprinkler head Galvanized steel, supplied with hex screws UL Listed. File VIXH.EX6587 Cross References: TOLCO...

2 pc. universal headguard - 1/2" IPS Features heavy gauge wire construction with powder coated red finish. (100 per case) Click here for Technical Data

Breakable Red Caps - Molded Plastic 2-1/2" NST Each set includes two caps and 4 eyelets with nuts for FDC 2-1/2" swivels. The caps have been molded with scored tabs for easy removal with a wrench. Provides protection...

UL AND FM APPROVED 200 PER BOX 20 LBS For fire sprinkler and other commercial piping Knurled swivel nut (3/8")design permits vertical hanger adjustment after installation. Zinc Plated steel construction Rubber...

4" OD x 1-3/4" ID x 1/32" thick Conceal oversized holes & cutting errors in ceiling tile Fire resistant plastic 1/32" thick Simply flex open and install around existing sprinkler drop. Forms to deep draws with low forces when heated to the upper...

PTFE Tape Industrial (.4 Density) 1/2" x 260" For all industrial applications Made from 100% virgin PTFE No pigments, no additives Exceeds MILSpec T-27730A Temperature range of -450F to +550F VOC’s (Volatile Organic...

Model 360 Wide Throat Beam Clamp 3/8" rod size Malleable iron, includes lock nut Click here for Technical Data Click here for Technical Data

CPVC One-Hole Wrap Around Strap 100 PER CASE Designed to support pipe running horizontally on the side of a beam. Install with hanger tabs upward only. Can also be used AS A GUIDE ONLY to limit movement of vertical CPVC...

FIRE SPRINKLER oops ring will conceal oversized holes in wall or ceiling. Simply install between Concealed escutcheon and sprinkler head. Fire resistant White steel plate 1/16" thick x 2-3/8" Inner Dimension x 4-1/2" Outer...

Air-Water gauge 0-300 PSI 1/4" NPT plastic back Manufactured in USA UL Listed, FM Approved and meets all requirements of Standard 25 of the NFPA Click Here to Upgrade to a Gauge Kit 60 per case/ 30# Available with...

The most Flexible Hose in its Class!  •Tested and Approved by UL with 2 bends at 4” bending radius for 28” hoses  •At the most competitive pricing “SAVINGS GUARANTEED”  •Backed by unsurpassed...

Solid Cast Galvanized Steel Wall Plate 1/2" IPS with Set Screw. (100 per case) Click here for Technical Data

Welding Outlet (Male Thread) ULC Listed / FM Approved Carbon Steel Welding Face with Saddle Shaped Design, easy for welding Click here for Technical Data (PDF) California Prop 65 WARNING WARNING:...

Purlin Clamp (Malleable Iron-Plain)(Cross Reference PHD Model 290)3/8"" rod sizeAlso available zinc platedStructural attachment to lower flange of metal beams or purlins with 45° flanges up to 2"" long and 90° flanges up to 1-1/2"" highSet screw...

Replacement Heel Jaw Assembly for 12" to 14" Pipe WrenchCross Reference: 31635All parts interchangeable with RIDGID® Click Here for Replacement Parts Breakdown RIDGID® is a registered trademark of RIDGID, Inc. ARGCO is not an...

20 pc inner box / 100 pc master boxThreaded Rod Fastener for ConcreteBottom mount - 3/8" thread x 1/4" shank x 1-1/2" longOne piece self-tapping for use in concreteFM, ICC ListedUse Concrete Drive Socket 2530313V-SOCKETClick here for...

For plumbers and pipe fitters. Color coded pink to signify that it is heavier than standard white thread seal tapes. Ensures leak free joints. Exceeds MIL Spec T-27730A. Temperature range of -450F to +550F. Teflon®...

(25 pcs inner box / 125 pcs master box) 3/8" rod 1/4 x 1" shank length Self drilling and threading into wood No pre-drilling required. Made in the U.S.A. UL Listed Click here for Technical...

Includes 2 keys - Keyed alike

CPVC 2 Hole Strap 3/4" Horizontal or vertical position Used at side or bottom of beam Galvanized steel, supplied with hex slotted screwsCross Reference: Tolco Fig 23 UL Listed. File VIXH.EX6587 ...

Model 906 Side Beam Angle Bracket 3/8" UNC Low Carbon Steel with Electro-Galvanized Finish UL Listed Click here for Technical Data (PDF)

Sammy® GST 10 for Wood. 3/8" ROD 1/4 x 2" shank length No pre-drilling required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A. UL Listed. Click here for Technical Data Minimum Purchase 1 Box of 25 pcs ...

Sammy® CST 2 for Concrete. Made with The Original Tapcon®. 1/2" ROD 5/16" x 1 1-1/2" shank length 1/4" pre-drilled pilot hole required. Install with Sammy #14 (Black) Nut Driver Made in the U.S.A. Click here for Technical Data Minimum Purchase 1...

Red one piece double hook headguard - 1/2" IPS. Heavy wire construction with latch hooks, exposed for easy installation. (100 per case) Click here for Technical Data

Tuf-Glide thread sealant with PTFE FBC™ System Compatible indicates that this product has been tested, and is monitored on an ongoing basis, to assure its chemical compatibility with FlowGuard Gold®, BlazeMaster® and Corzan® piping...

Red one piece double hook headguard with baffle plate - 1/2" IPS. Designed to protect Upright Sprinkler Heads Heavy wire construction with latch hooks, exposed for easy installation. (100 per case) Click here for...

White plastic rod button Injection molded plastic 3/8" inner diameter x 1/2" height x 1-51/64" Outer diameter Recommended for giving a finished appearance where threaded rod enters ceiling (100 per case) Click...

1/2" x 1/2" Brass Sprinkler Extension Designed to be used to correct sprinkler head elevation without removing or re-cutting sprinkler drop. Material: Brass* - B16 * Contains lead. Not for use in water systems intended for...

Model 010 Sway Brace Pipe Attachment The pipe attachment component of a sway brace system used in conjunction with a structural attachment fitting and joined together with a bracing pipe element forming a complete sway brace...

Fire Sprinkler Laser Centering Level Grid-Marksman Increase speed, accuracy and productivity with ceiling grid installations  24” Aluminum Level is Durable and Easy to use Laser Attachment is recessed in the profile of the level protecting it...

Drum Drip Assembly Threaded Connections GalvanizedAuxiliary drain designed to meet NFPA 13 and NFPA 25 requirements.Assembled with 1" brass quarter turn valves with chrome plated brass balls. They are easily retro-fitted into existing...

The most Flexible Hose in its Class! •Tested and Approved by UL with 2 bends at 4” bending radius for 28” hoses •At the most competitive pricing “SAVINGS GUARANTEED” •Backed by unsurpassed integrity and Liberty...

The 2-pc adjustable sprinkler escutcheon (canopy) has been designed to provide an aesthetically pleasing concealment of the sprinkler piping servicing the individual sprinkler head. The replacement version provides an alternative for...