Braxton Harris

6-3/8" Replacement Strainer for 2" or 3" for FD2 and FDCC2 6-3/8" OD strainer only for floor drain with trap.

6-Volt Flashlight. Waterproof. Polyethylene construction. Shatterproof lens. Large reflector for larger beam. Lantern floats for easy recovery in water. Includes 6 volt battery.  

6-Way Heavy Duty Screw Driver DURABLE BITS: 2 SLOTTED AND 2 PHILLIPS. SHAFT ENDS ARE1/4″ & 5/16″ HEX SIZES FOR USE AS NUT DRIVERS. 7-1/2″ LENGTH.  

6-way Heavy Duty Screwdriver Display (24pcs) 24 PACK DISPLAY CARTON. DURABLE BITS: 2 SLOTTED AND 2 PHILLIPS. SHAFT ENDS ARE1/4? & 3/16? HEX SIZES FOR USE AS NUT DRIVERS. 7-1/2? LENGTH.

6-way screwdrive/ nut drive 12-pack. Carton-priced per each Priced per screwdriver in display.

6-WAY SCREWDRIVER SLOTTED REPLACEMENT BIT  

60 lb Gas Test Gauge Assembly w/ 1" FIP Connection Steel casing with 2" shatterproof face and 1/4" MPT connection, 1/2" lb. increments. Brass air valve. Chrome plated body with 1" FPT inlet.

60 lb Gas Test Gauge Assembly w/ 3/4" FIP Connection Adapts to 3/4" MPT connection, steel casing with 2" shatterproof face and 1/4" MPT connection, 1/2" lb. increments. Brass air valve. Chrome plated body with 3/4" FPT inlet.

60' 1-5/8" ID x 1" Wall Self Seal Pipe Insulation, 10 Per Carton 1-5/8" ID x 1" Wall Thickness. 6 Foot Lengths. Fits 1-1/2" CTS, 1-1/4" IPS. R Factor: 6.9. Flame Spread Rating & Smoke Rating: 25/50. Will Not Contribute Significantly To Fire. Thermal...

60lb Mega No Hub Torque Wrench (5/16" socket) Slide down rocking reversing feature. Heavy duty build with chrome vanadium sockets. 60lb rated with 5/16″ socket.  

65" Brass Riser For AAS & AASDSR

66' 1-7/8" ID x 3/4" Wall Self Seal Pipe Insulation, 11 Per Carton 1-7/8" ID x 3/4" Wall Thickness. 6 Foot Lengths. Fits 1-1/2" IPS. R Factor: 4.8. Flame Spread Rating & Smoke Rating: 25/50. Will Not Contribute Significantly To Fire. Thermal...

66' 2-5/8" ID X 1/2" WALL SEMI-SLIT PIPE INSULATION 1/2" WALL THICKNESS

7" Channel Lock Tongue and Groove Pliers (426) RIGHT ANGLE TEETH. UNDERCUT TONGUE & GROOVE. WITH COMFORT GRIPS.  

7" Diameter 16 Gauge Stainless Steel Extension Cover 7" outside diameter 16 gauge stainless steel with beveled edge. Made to be used on floors or walls. 1500 degree Fahrenheit fire rating.

7" Diameter 16 Gauge Stainless Steel Extension Cover w/ 1/4" x 4" Length Bolt 7″ outside diameter 16 gauge stainless steel with beveled edge. Made to be used on floors or walls. 1500 degree Fahrenheit fire rating. Chrome plated bolt is 1/4″...

7" Diameter 24 Gauge Stainless Steel Extension Cover w/ 1/4" x 4" Length Bolt 7″ DIAMETER WALL ACCESS COVER WITH CHROME PLATED BOLT. BOLT HAS 1/4″ THREADS X 4″ LENGTH.

7" Griplock* Tongue and Groove Water Pump Pliers (GL6) 1″ CAPACITY  

7" Lavatory Hanger Steel 7″ universal fit. Galvanized steel  

7" Length (1/2cts) Long Tub Spout with Slip Connection Zinc die cast. 1/2" copper slip connection. 2-3/4" minimum nipple length from wall. 4-1/4" maximum nipple length from wall. 2-7/16" OD of spout at wall. Width at nose of spout is 1-7/8".

7" Length (1/2ips) Long Tub Spout with Front Diverter Zinc die cast. 1/2" IPS connection at nose end of spout. 4-1/4" maximum nipple length from wall. 2-7/16" OD of spout at wall. Width at nose of spout is 1-7/8". 1/2" IPS connection.

7" Length (1/2ips) Long Tub Spout with Nose Connection Zinc die cast. 1/2″ connection at nose end of spout. 4-1/4″ maximum nipple length from wall. 2-7/16″ OD of spout at wall. Width at nose of spout is 1-7/8″.  

7" OD 24 Gauge Stainless Steel Extension Cover 7″ outside diameter. Cleanout access wall cover.

7" Strap Wrench 7″ handle length 2″ IPS capacity. Heavy malleable iron construction with high tensile strength strap. For use on decorative finished products to prevent damage to finish.  

7" Utility Knife w/ Retractable Blade EXTRA BLADES STORE IN HANDLE.  

7" x 5/16" Log Lighter Key (zinc die-cast) 7" LENGTH X 5/16" CONNECTION

7" x 7" Mini Tub/Shower Splash Guards (pair) White Polystyrene. Self adhesive strips. Make sure area is clean where adhesive will be applied. Caulking may be desired.  

7"-13" OD Corrugated Roof Flashing Fits pipes 7″ (177mm) to 13″ (330mm) OD. Base diameter 16-1/2″ (412mm). Made of virgin gray EPDM rubber with continuous service range of -65 degrees F to 250 degrees F. Aluminum round base conforms to...

7"-13" Pipe OD High Temperature Corrugated Roof Flashing Made for high temperature applications. Fits pipes 7″ (177mm) to 13″ (330mm) OD. Base diameter 16-1/2″ (412mm). Height 6″. Made of virgin red silicone rubber with...

7' (84") S.S. Braided Ice Maker Connector- Lead Free 1/4″ O.D. Female Compression x 1/4″ O.D. Female Compression x 7′ (84″) length. Fits all standard ice makers. Includes nickel plated brass ends.

7-1/2" Channel Lock Needle Nose Pliers (326) 7-1/2A” LENGTH WITH SIDE CUTTER. CROSS HATCHING ON JAWS. POLISHED HIGH CARBON DROP FORGED STEEL. WITH COMFORT GRIPS. PERFECTLY MATED CUTTER, HEAT TREATED TO HOLD ITS EDGE.  

7-1/4" OD Flat Cleanout Cover Plate- Matte Chrome Finish 7-1/4″ OUTSIDE DIMENSIONS. FLAT DESIGN HIDES CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14 WOOD SCREW.  

7-1/4" OD Flat Plastic Cleanout Cover Plate- White Finish 7-1/4″ OUTSIDE DIMENSIONS. FLAT DESIGN HIDES CLEANOUT FITTING. MANUFACTURED FROM HIGH IMPACT PLASTIC. SUPPLIED WITH #14 WOOD SCREW. WHITE FINISH CAN BE PAINTED OR WALLPAPERED.  

7.5" Black Nylon Cable Ties 50#(UV/ Weather Resistant) 7" length, 3/16" width, standard type 40lbs tensile strength. Heat and UV stabilized nylon. Black color.

7/8" (3/4"cts) Self Seal Poly Pipe Insulation Tee

7/8" Ballcock Coupling Nut- Solid Brass 7 THREADS, 7/8" THREAD CONNECTION X 11/16" HOLE

7/8" Flare Brass Short Nut (style 41S) 7/8″ flare threads. Used with copper, brass, aluminum, welded steel tubing. Used on lines handling hard to hold liquids and gases, including gasoline, grease oil, water, vacuum lines, air lines, LP and...

7/8" ID x 50' Dishwasher Drain Hose IAPMO LISTED. EPDM WITH 2-PLY TEXTILE BRAIDED REINFORCING. MEETS ANSI / AHAM DW-1SPECIFICATIONS. RESISTS KINKING.

7/8" O.D. Brass Compression Union- Lead Free 7/8" OUTSIDE DIAMETER. TEMPERATURE RANGES FROM -65 TO 250 DEGREES FAHRENHEIT. USED WITH COPPER, BRASS & ALUMINUM TUBING, LOW AND MEDIUM AIR, WATER AND OIL PRESSURE LINES.

7/8" OD (3/4 CTS) Low Pattern Flange- Chrome Plated (3/4" NOMINAL COPPER TUBE SIZE) SURE GRIP ESCUTCHEON. CHROME PLATED. FLANGE WIDTH IS 2-1/2".