Dixon

J2B3 - J-Series Automotive Pneumatic Push-Loc Hose Barb Plug

(No reviews yet) Write a Review
SKU:
J2B3
Availability:
Usually Ships Within 24 Hours
Weight:
0.05 LBS
*Images are for visual reference only.
$4.14

Represents the combined quantity sold of all the sizes under this product SKU.
Sold:

Description

Details

Compatibility & Interchange Data

  • Truflate Automotive Interchange
  • Parker 10 Series, Rectus 55KM and Tomco A2100/PT400

Construction

Machined components are manufactured using solid bar stock.

Safety Notes

  • Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application.
  • Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death.
  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Specifications

Rated pressure for connected Brass Coupler & Steel Plug: 500 PSI (35 bar) Maximum Working and 11,500 PSI (793 bar) Burst

WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
View AllClose

Reviews