Dixon
GAB1 - Global Air King® 2-Lug Hose End
- SKU:
- GAB1
- Availability:
- Usually Ships Within 24 Hours
- Weight:
- 0.47 LBS
*Images are for visual reference only.
Description
Details
Safety Notes
- Air King is for air and water service only
- Never use any Air King coupling for steam service!
- The use of an Air King safety clip or wire type retainer is necessary to ensure Air King universal couplings will not become accidentally disconnected.
- To provide protection against coupling breakage and related hazards, Dixon recommends the use of a whip hose.
- Pressure rating given at ambient temperature 70°F/21°C
Features
- Safety clip included
- Supplied with rubber washer, part # AWR4
Specifications
- Air King meets pressure requirements as specified in A-A-59553 commercial item description superseding Mil Spec.WWC-633D.
- Separation Force: 350 lbs.
Use
- Use of supplied safety clip guarantees the fittings are properly connected because the safety pin will not go through the holes in mating fittings until couplings are locked in place. Only one Air King safety clip or wire type retainer is required for each Air King universal coupling.
- Air King is for air and water service only
WARNING: This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Resources
- GAB1
- Air King® and Accessories
- Procedures 2100: Pre-Formed Band Clamp using Pneumatic Roll-Over Tool
- Procedure 2101: Pre-Formed Band Clamps using Punch Style Tool
- Procedure 2102: Pre-Formed Band Clamps using Punch Style Tool & Air King Hose
- Procedure 2103: Pre-Formed Band Clamps using Screw-Action Tool
- Typical Jobsite Setup for 125CFM Compressor
- Typical Jobsite Setup for 600CFM Compressor
- 2022 DPL Book 180.pdf
- Outside Air Applications
- Dixon Boss
