Marco Products

1-1/4" Maxum III Abrasive Metering Valve with Urethane Sleeve  

1-1/4" Nipple for Bantam Abrasive Metering Valve  

1-1/4" blast pot pusher line assembly with two 1-1/4" female swivels, two 1-1/4" T-bolt hose clamps, and 3' x 1-1/4" ID air hose. For 6.5 cu ft and smaller blast pots with a 1-1/4" pipe string. 1-1/4" Pusher Line Assembly Two 1-1/4" Female...

1-1/4" ID super-flex uncoupled blast hose with 1/4" inner tube for flexibility and reduced weight. This is a 100' section for longer runs.  1-1/4" ID x 1-7/8" OD 100' length Uncoupled 1/4" liner thickness 175 PSI working pressure 2-ply fabric...

1-1/4" ID super-flex uncoupled blast hose with 1/4" inner tube for flexibility and reduced weight.  1-1/4" ID x 1-7/8" OD 50' section Uncoupled 1/4" liner thickness 175 PSI working pressure 2-ply fabric reinforcement Literature: Blast Hose,...

1-Outlet Galaxy 301 Hose-Mountable Blast Light Convertor

1.0 Cu. Ft. Blast Pot, Hose & Nozzle Package

Nozzle washers for 3/4" entry nozzles. Sold 10/package. 3/4" gasket ID 10/package

1/2" Flat Washer for 0.35 Cu. Ft. Axle Assembly  

1/2" ID x 50 Ft. Black Heavy-Duty Abrasive Blasting Hose with 10L174

1/2" NPT Full Port Ball Valve. Assembly part for Allred L-Series Blast Pots. 1/2" NPT Full Port Ball Valve

1/2" NPT Union

1/2-20 Hex Nut

1/4" ID x 25' Airless Spray Hose, 3600 PSI with female x female fittings. 1/4" ID x 25' Airless Spray Hose 3600 PSI working pressure Female x Female couplings installed Polyester braid reinforcement Blue cover

1/4" ID x 25' Airless Spray Hose, 5000 PSI with female x female fittings. 1/4" ID x 25' Airless Spray Hose 5000 PSI Female x Female couplings installed Steel braid reinforcement Black cover

1/4" ID x 50' Airless Spray Hose, 3600 PSI with female x female fittings. 1/4" ID x 50' Airless Spray Hose 3600 PSI working pressure Female x Female couplings installed Polyester braid reinforcement Blue cover    

1/4" ID x 50' Airless Spray Hose, 5000 PSI with female x female fittings. 1/4" ID x 50' Airless Spray Hose 5000 PSI working pressure Female x Female couplings installed Steel braid reinforcement Black cover

1/8" Male NPT Petcock for small moisture separators commonly mounted on Allredi L-Series Blast Pots 1/8" Male NPT Petcock

1/8" NPT Pressure Gauge 160 psi

10" Abrasive Blasting Pot Funnel with Screen  

Blast pot packages are a simple way to add everything you need to start blasting with a single part number. This kit includes a 25' section of blast hose with nylon coupling and 1-1/4" nozzle holder. It also includes a lid and screen for any blast pot...

100 Ft. Pneumatic Twinline Hose - 3/16" Fittings

110 Ft. Pneumatic Twinline Hose - 1/4" X 1/8" Fittings

The Allredi 125E Remote Control System is a OSHA compliant "fail-to-safe" system with a 1-1/2" brass inlet valve, 1" brass outlet valve, abrasive trap, 120-Volt AC to 12-Volt AC power converter, 12-Volt AC 190 electric control assembly, 50' electric...

The Allredi 125P Remote Control System is a OSHA compliant "fail-to-safe" system with a 1-1/2" brass inlet valve, 1" brass outlet valve, abrasive trap, and a 150P Remote Control Switch. In the event that the user drops the remote control, the system...

Heavy-gauge steel blast pot lid for keeping rain and debris out of blast pots with 14" tops. Includes one handle. 14" Blast Pot Lid Steel One Handle

Blast pot screens prevent large debris or abrasive bags from falling in to blast pots. This screen fits blast pots with 14" tops and can be kept in place while using blast pot lids. 14" Blast Pot Screen 1/4" holes

The Allredi 151E Remote Control Switch has a lightweight, durable aluminum body that utilizes a spring loaded safety tab and broad handle. This is a repairable design with every part available. This has a 18" electric cord installed for splicing to your...

Allredi 155E Remote Control Switch utilizes a toggle switch to activate and deactivate the blast pot. This is a permanently sealed remote control switch to keep dust and debris from entering the body. This part includes 10' of Allredi Xtreme Duty...

Heavy-gauge steel blast pot lid for keeping rain and debris out of blast pots with 16" tops. Includes one handle. 16" Blast Pot Lid Steel One Handle

Blast pot packages are a simple way to add everything you need to start blasting with a single part number. This kit includes a 50' section of blast hose with nylon coupling and 1-1/4" nozzle holder. It also includes a lid and screen for any blast pot...

Blast pot screens prevent large debris or abrasive bags from falling in to blast pots. This screen fits blast pots with 16" tops and can be kept in place while using blast pot lids. 16" Blast Pot Screen 1/4" holes

Heavy-gauge steel blast pot lid for keeping rain and debris out of blast pots with 18" tops. Includes one handle. 18" Blast Pot Lid Steel One Handle

Blast pot packages are a simple way to add everything you need to start blasting with a single part number. This kit includes a 50' section of blast hose with nylon coupling and 1-1/4" nozzle holder. It also includes a lid and screen for any blast pot...

Blast pot screens prevent large debris or abrasive bags from falling in to blast pots. This screen fits blast pots with 18" tops and can be kept in place while using blast pot lids. 18" Blast Pot Screen 1/4" holes

2 and 4 Hole Jr. - Cover Bolt without Pin

2" NPT Aluminum Tank Coupling, Tapered Threads, Oversized Lugs 2" NPT aluminum tank coupling Tapered threads Oversized lugs

2" NPT Brass Tank Coupling, Tapered Threads, Oversized Lugs 2" NPT brass tank coupling Tapered threads Oversized lugs

4-lug threaded end coupling with 2" thread size for connecting equipment to a hose. 4-lug 2" female thread size Uses 10UG4 rubber gasket

2" ID Brass Abrasive Blasting Hose Coupling - Oversized