Marco Products

#6 Tungsten carbide brass poly long venturi blast nozzle. #6 - 3/8" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane Jacket Tungsten carbide liner 6-1/2" length Documents: Blast Nozzles - Part Numbers and Schematics...

#6 Tungsten carbide all poly long venturi blast nozzle. #6 - 3/8" orifice 1" entry with 1-1/4" NPS thread Polyurethane jacket and threads Tungsten carbide liner 6-3/4" length Documents: Blast Nozzles - Part Numbers and Schematics Guide - 106M029...

#6 Tungsten carbide all poly long venturi blast nozzle with 50MM thread. #6 - 3/8" orifice 1-1/4" entry with 50MM thread Polyurethane Jacket and threads Tungsten carbide liner 6-3/4" length Blast Nozzles - Part Numbers and Schematics Guide - 106M029...

#7 Tungsten carbide brass poly long venturi blast nozzle. #7 - 7/16" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane Jacket Tungsten carbide liner 8" length Documents: Blast Nozzles - Part Numbers and Schematics Guide...

#7 Tungsten carbide all poly long venturi blast nozzle. #7 - 7/16" orifice 1" entry with 1-1/4" NPS thread Polyurethane jacket and threads Tungsten carbide liner 8" length Documents: Blast Nozzles - Part Numbers and Schematics Guide - 106M029...

#8 tungsten carbide brass poly long venturi blast nozzle #8 - 1/2" orifice 1" entry with 1-1/4" NPS brass thread Impact absorbing polyurethane jacket Tungsten carbide liner 8-3/4" length Documents: Blast Nozzles - Part Numbers and Schematics...

#8 Tungsten carbide all poly long venturi blast nozzle. #8 - 1/2" orifice 1" entry with 1-1/4" NPS thread Polyurethane jacket and threads Tungsten carbide liner 9" length Documents: Blast Nozzles - Part Numbers and Schematics Guide - 106M029...

1/4" female nut & barb for twinline hoses 1/4" female nut & barb Used for the 1/4" ID air hose in 1/4" x 1/8" twinline hose

1/8" female nut & barb for twinline hoses. This part is used to connect the 1/8" threaded leg of twinline with 1/4" and 1/8" fittings. All twinline hose has a 3/16" ID. 1/8" female nut & barb Fits the 1/8" ID threaded fitting on twinline...

1/2" Oetiker clamp for securing male twinline hose fittings 1/2" Oetiker clamp Used for securing male twinline hose fittings

Pneumatic Twinline Hose Ferrel

Pop-up Valve Seat is a orange rubber o-ring that is used with pop-up valves inside of blast pots for forming a seal and allowing the blast pot to pressurize. Pop-Up Valve Seat Orange Rubber O-Ring

Pop-up valve with male internal sleeve. Orange rubber body, seats with Pop-Up Valve Seat (1006040) Pop-Up Valve, Internal Orange Rubber Body

Red replacement safety tab for the Allredi 150P and 151E Remote Control Switches. This part works with spring (1015005, not included) to lift the handle and deactivate the switch. Replacement Safety Tab Fits Allredi 150P & 151E Remote Control...

Allredi Regulator Metering Vave with a heavy-duty solid steel metering handle, easily accessible clean-out port, stainless steel metering plate and valve core, and galvanized pipe fittings. This valve has a 1-1/2" inlet and 1-1/4" outlet. Also referred...

This repair kit fits both the 1-1/4" & 1-1/2" GateKeeper Air Valves. This kit includes the nuts, gaskets and o-rings, and diaphragm. See part numbers and schmatics guide for a full list of part numbers included. Repair Kit for 1-1/4" & 1-1/2"...

Aluminum replacement handle for the Allredi 150P and 151E Remote Control Switches Replacement Handle Fits Allredi 150P & 151E Remote Control Switch Documents: Allredi 150P Remote Control Switch - Part Numbers & Schematics Guide - 106M023...

Replacement Toggle Boot for 155E, 156E, and 158P Remote Control Switches Toggle Boot Fits 155E, 156E, and 158P Remote Control Switches Documents: Allredi 155E Remote Control Switch - Part Numbers & Schematics Guide - 106M001 Allredi 155E...

Rubber Button Bumper for the Allredi 150P Remote Control Switch. This part is what stops the flow of air through the adapter block and completes the circuit to activate the blast system when the handle is depressed. Rubber Button Bumper Fits Allredi...

Rubber Leg Tip for .15 and .35 Cu. Ft.

Rubber Liner for 1" ID Abrasive Blasting Hose  

Service Kit - Urethane for Bantam Abrasive Metering Valve  

The Service Kit for 1-1/2" High Flow GateKeeper Air Valves replaces the interal nuts, gaskets, o-rings, a disc, and disc plate. See part numbers and schematics guide for a full list of part numbers included. Service Kit for 1-1/2" High Flow...

Service kit for Allredi 1-1/2" Inlet Valve. Includes o-rings, inner spring, bottom cap gasket, outer spring, and two plug washers. Service Kit for Allredi 1-1/2" Inlet Valve Documents: Allredi 125P Remote Control System - Part Numbers &...

The Service Kit for 150P Remote Control Switch includes a safety tab, adapter block gasket, two each screws and springs, three button bumpers, and four washers. See part numbers and schematics guide for a full list of parts included. Service Kit Fits...

Service Kit for Tandem Remote Control Valve  

Internal shut off arm for Allredi 153 Remote Control Valve. Connects internal washer and screws to open and close the rubber valve washer. Shut Off Arm Fits Allredi 153 Remote Control Valve Documents: Allredi 153 Remote Control Valve - Part...

Silver Tip Nozzles - Tungsten

Socket Head Cap Screw 10-32 X 3/8”

Replacement spring for the Allredi 150P and 151E Remote Control Switches. This part works with the safety tab (1015003, not included) to lift the handle and deactivate the switch. Two required, sold individually. Replacement Spring Fits Allredi 150P...

Tandem Remote Control Valve  

1-1/2" NPT Brass Tank Coupling, Tapered Threads 1-1/2" NPT brass tank coupling Tapered threads Standard lugs

Clemco CPF replacement airline filter cartridge. 6-stage filter cartridge  For use with the Clemco CPF breathing air filter  Documents: Clemco® CPF Series Airline Filter - Part Numbers and Schematics Guide - 106M485

1/8" male threaded barb. This part is used to connect with the 1/8" fitting on twinline with 1/4" and 1/8" fittings. All twinline hose has a 3/16" ID.  1/8" male threaded barb Fits the 1/8" ID threaded fitting on twinline...

1-1/4" NPS Brass Tank Coupling, Straight Threads 1-1/4" NPS brass tank coupling Straight threads Standard lugs

Ultralite Blast Suit, size XX-Large. The Ultralite Blast Suit is a durable, light-weight coverall designed specifically for abrasive blasting environments where mineral, slag, and other non-ferrous abrasives are used. This blast suit is constructed of a...

Ultralite Blast Suit, size small. The Ultralite Blast Suit is a durable, light-weight coverall designed specifically for abrasive blasting environments where mineral, slag, and other non-ferrous abrasives are used. This blast suit is constructed of a...

Urethane Service Kit for Maxum and Maxum III Abrasive Metering Valves  

Valve Body for Blastmaster® 153 Remote Control Valve  

Valve Spring for 2- and 4-Hole Jr.