Milwaukee

INCLUDES: • (1) M18 FUEL 14" Top Handle Chainsaw• (1) REDLITHIUM HIGH OUTPUT XC 8.0 Battery• (1) M18 & M12 Rapid Charger• (1) Scabbard• (1) ScrenchFEATURES:• POWERSTATE Brushless Motor delivers the power to complete cuts in demanding applications...

Milwaukee 49-57-1000 DescriptionMilwaukee's Threaded Steel Hawg® cutters range from 3/4" to 6" and drill up to 2" hole depth in steel. These cutters drill up to 3 times faster than twist drill bits due to the carbide teeth and alternating cutting pattern...

Milwaukee 3008-20 Description The MILWAUKEE M18 Brushless Telescoping Pole Pruning Shears provide fast, clean pruning, and eliminate the repetitive pulling associated with manual units. The telescoping pole pruning shear’s Brushless motor gives the...

INCLUDES: • (1) 32oz Dead Blow Ball Peen HammerFEATURES:• Most Durable: Steel Reinforced Handle• Precision Balanced Design• Anti-Slip Grip: Overmold Handle for more control• Most durable grip is resistant to peeling when exposed to solvents.• Smooth...

Milwaukee 48-73-7142E Description The MILWAUKEE High-Dexterity ANSI/ISEA 105-2016 Cut Level 4 Nitrile Dipped Gloves allow users to maintain high dexterity while also being more durable. These cut-resistant gloves are made of an 18 gauge knit for total...

Milwaukee 49-59-1937 Specifications: •  Diameter: 3/4" •  Hole Depth: 1" Milwaukee 49-59-1937 Features: •  Unique tooth geometry allows for better centering and faster cutting •  Thin wall design enables cutters to cut faster and...

INCLUDES: • (1) 1-1/16 in. Quick Change Tang Drive Steel Hawg® Cutter FEATURES: • 1-1/16 in. bit diameter • Quick change tang drive • 1 in. cutting depth • For use on 4245 Steel Hawg® SPECIFICATIONS: • Diameter 1-1/16 in • Depth 1 in Milwaukee's...

INCLUDES: • (1) 2-7/8 in. Threaded Steel Hawg® Cutter FEATURES: • 2-7/8 in. bit diameter • Metric thread size M18 x 1.5 shank • 2 in. cutting depth • For use with No. 3 Morse Taper Arbor Assembly 49-57-0010 SPECIFICATIONS: • Diameter 2-7/8 in • Depth...

Milwaukee 49-59-4113 Description Milwaukee Tungsten Carbide Tipped Annular Cutters offer an Advanced Tooth Geometry that Cuts, Cleans, and Clears while drilling, leading to Faster Holes and Longer Life. The cutters displace less material for the same...

INCLUDES: • 2" x 1" Annular Cutter • Ejector pin sold separately FEATURES: • 20% Thinner Wall Construction - Faster Cutting due to less material being removed for the same size hole. • Duel Alternating Tooth Geometry - More aggressive cutting as well...

Milwaukee 48-22-8901 Description Milwaukee Tool’s dipped gloves are designed to provide ultimate durability, all–day comfort, and best in class dexterity for handling small objects. Milwaukee Tool’s Cut 1 Dipped Gloves utilize a textured nitrile palm to...

Milwaukee 49-59-0812 Features  3/4" Diameter shank - Industry standard  Unique tooth geometry - Allows for better centering and faster cutting  Thin wall design - Enables cutters to cut faster and more efficiently by removing less material...

Milwaukee 49-16-B400C Description The MILWAUKEE® M12™ and M18™ Cable Strippers provide the most consistent strips and best access. The Milwaukee 400 MCM Cu THHN/ XHHW Bushings are individually engineered to deliver users safer and cleaner strips on all...

Milwaukee 48-73-5052 Description Milwaukee Tool’s ANSI Type R Class 2 High Visibility Performance Safety Vest is designed to carry more. This safety vest has 15 pockets including a clear ID holder, rear tablet pocket, and 3 internal pockets that provides...

Milwaukee 49-90-2018 Description The MILWAUKEE Vacuum Power Tool Adapter is ideal for collecting dust and debris directly from compatible power tools. The adapter is compatible with Milwaukee vacuums 0880-20, 0882-20, 0940-20, 0960-20, and 0970-20 and...

Milwaukee 49-59-0011 Description The Milwaukee 1 in. retractable pilot pin is designed to increase accuracy and productivity on the jobsite. The Milwaukee 1 in. retractable pilot pin provides users faster and easier alignment of the annular cutter at...

INCLUDES: • (1) 1-7/8 in. Threaded Steel Hawg® Cutter FEATURES: • 1-7/8 in. bit diameter • Metric thread size M18 x 1.5 shank • 2 in. cutting depth • For use with No. 3 Morse Taper Arbor Assembly 49-57-0010 SPECIFICATIONS: • Diameter 1-7/8 in • Depth...

FEATURES: • 2 5/8 in. bit diameter • For use with quick change arbor 49-57-0035 • 3/16 in. cutting depth For materials up to 3/16 inch these carbide tipped sheet metal Hole Saws produce fine holes in stainless steel or structural steel studs. They...

INCLUDES: • (1) CUT 6 DIPPED GLOVES - MFEATURES:• 18 Gauge - Total Mobility• Reinforced Nitrile Coating Between Thumb and Index Finger• Long-Lasting Nitrile Dip• ANSI Cut Level 6• EN388 - 4X43F• SMARTSWIPE™ Touchscreen Compatible Fingertips• High...

Milwaukee 49-59-1500 Specifications: •  Diameter: 1-1/2" •  Shank: 3/4" •  Depth: 1" Milwaukee 49-59-1500 Features: •  Unique Tooth Geometry - Allows for better centering and faster cutting •  Flute Design - Shorter flute...

INCLUDES: • 1-7/16" x 2" Annular Cutter • Ejector pin sold separately FEATURES: • 20% Thinner Wall Construction - Faster Cutting due to less material being removed for the same size hole. • Duel Alternating Tooth Geometry - More aggressive cutting as...

Milwaukee 49-59-4119 Description Milwaukee Tungsten Carbide Tipped Annular Cutters offer an Advanced Tooth Geometry that Cuts, Cleans, and Clears while drilling, leading to Faster Holes and Longer Life. The cutters displace less material for the same...

Milwaukee 48-22-9080 Description Milwaukee Tool’s 20oz Curved Claw Smooth Face Hammer provides the best driving performance in the industry. The hammer features a ShockShield™ grip, which results in up to 10x better vibration reduction and will not peel...

Milwaukee 2672-21 Description The M18™ FORCE LOGIC™ CABLE CUTTER KIT with 750 MCM Cu/Al Jaws delivers the fastest installation ready cuts. This open jaw, fully balanced in-line tool allows you to cut effortlessly in the tightest panels without looping...

INCLUDES: • 5/8" x 1" Annular Cutter • Ejector pin sold separately FEATURES: • 20% Thinner Wall Construction - Faster Cutting due to less material being removed for the same size hole. • Duel Alternating Tooth Geometry - More aggressive cutting as...

Milwaukee 2719-21 Description The Milwaukee 2719-21 M18 FUEL HACKZALL is the fastest cutting and most powerful one-handed reciprocating saw. Utilizing a POWERSTATE Brushless Motor and a best in class 7/8" stroke length, the M18 FUEL HACKZALL cuts up to...

Milwaukee 48-22-8783 Description The MILWAUKEE® XL Impact Cut Level 5 Goatskin Leather Gloves offer impact protection with comfortable leather. These XL work gloves are ANSI/ISEA Impact Level 2 Rated, and ANSI Cut Level 5 Rated. These XL leather work...

Milwaukee 48-22-8770 Description The MILWAUKEE® Small Impact Cut Level 3 Goatskin Leather Gloves offer impact protection with comfortable leather. These small work gloves are ANSI/ISEA Impact Level 2 Rated, and ANSI Cut Level 3 Rated. These leather work...

INCLUDES: • (1) 1-15/16 in. Threaded Steel Hawg® Cutter FEATURES: • 1-15/16 in. bit diameter • Metric thread size M18 x 1.5 shank • 2 in. cutting depth • For use with No. 3 Morse Taper Arbor Assembly 49-57-0010 SPECIFICATIONS: • Diameter 1-15/16 in •...

INCLUDES: • 1-3/4" x 1" Annular Cutter • Ejector pin sold separately FEATURES: • 20% Thinner Wall Construction - Faster Cutting due to less material being removed for the same size hole. • Duel Alternating Tooth Geometry - More aggressive cutting as...

Milwaukee 48-20-9050 Description MILWAUKEE® SHOCKWAVE™ Carbide Hammer Drill Bits use sharpened carbide, delivering up to 5x life in concrete and up to 2x faster drilling. Engineered with a precision ground tip, these bits will deliver faster starts and...

Milwaukee 49-59-2194 Specifications: •  Diameter: 1-15/16" •  Cutting Depth: 2" Milwaukee 49-59-2194 Features: •  The high speed steel cutter has shorter flute design which allows for chips to fall freely from cutter •  An unique...

INCLUDES: • (1) M18 FUEL Blind Rivet & Lockbolt Mandrel Stopper?FEATURES:• Compatible with both 2661 M18 FUEL™ 1/4" Lockbolt Tool w/ ONE-KEY™ and 2660 M18 FUEL™ 1/4" Blind Rivet Tool w/ ONE-KEY™ • Eliminates additional weight on tool as mandrels...

Milwaukee 49-59-4069 Description Milwaukee Tungsten Carbide Tipped Annular Cutters offer an Advanced Tooth Geometry that Cuts, Cleans, and Clears while drilling, leading to Faster Holes and Longer Life. The cutters displace less material for the same...

Milwaukee 49-59-4131 Description Milwaukee Tungsten Carbide Tipped Annular Cutters offer an Advanced Tooth Geometry that Cuts, Cleans, and Clears while drilling, leading to Faster Holes and Longer Life. The cutters displace less material for the same...

Milwaukee 1680-20 Features  Powerful, Heavy-Duty Milwaukee Built Motor  Low Speed Clutch Protects Gear Train  Powerful - Highest Amp Rating (13.0) And Power-To-Weight Ratio In Its Class  Rotating Handle - Roto-Lok 90° Left/Right...

Milwaukee 601B-3X Description Our heavy duty Pocket T-Shirt is made from durable, breathable fabric for all day protection to outlast the job. Built with a tear & abrasion resistant 60/40 cotton/poly blend, this t-shirt allows you to work hard while...

INCLUDES: • (1) 9/16 in. Quick Change Tang Drive Steel Hawg® Cutter FEATURES: • 9/16 in. bit diameter • Quick change tang drive • 1 in. cutting depth • For use on 4245 Steel Hawg® SPECIFICATIONS: • Diameter 9/16 in • Depth 1 in Milwaukee's Quick...

INCLUDES: • (1) 9/16 inch One Piece Steel Hawg® Cutter FEATURES: • Alternating tooth form geometry for faster cutting • Carbide teeth for longer life and cleaner cuts • Self-ejector and centering pin for faster plug removal and accurate cuts...

INCLUDES: • (1) FREEFLEX Unlined Bib Overalls - GRAY 34X30FEATURES:• Engineered To Move Freely: 4-way stretch fabric and custom crotch gusset allow for effortless kneeling and crouching• Lightweight, broken-in comfort• Jobsite Durability:...