Milwaukee

INCLUDES: • (1) SHOCKWAVE Impact Duty 1" Drive 13/16" 4 Point SocketFEATURES:• Optimized for use with 1" drive impact wrenches, and adapters• Stamped and ink filled diameter markings for wear resistance• Dual hole design and groove for easier...

INCLUDES: • (1) SHOCKWAVE Impact Duty 1" Drive 1-1/16" Thin Wall Extra Deep 6 Point SocketFEATURES:• Optimized for use with 1" drive impact wrenches, and adapters• Stamped and ink filled diameter markings for wear resistance• Dual hole design and groove...

INCLUDES: • (1) SHOCKWAVE Impact Duty 1" Drive 1-1/8" Thin Wall Extra Deep 6 Point SocketFEATURES:• Optimized for use with 1" drive impact wrenches, and adapters• Stamped and ink filled diameter markings for wear resistance• Dual hole design and groove...

INCLUDES: • (1) SHOCKWAVE Impact Duty 1" Drive 1-1/4" Thin Wall Extra Deep 6 Point SocketFEATURES:• Optimized for use with 1" drive impact wrenches, and adapters• Stamped and ink filled diameter markings for wear resistance• Dual hole design and groove...

Milwaukee 49-67-0115 DescriptionThis spacer mounts between the cradle and the Diamond Drill Motor to increase the bit capacity from 10 inches to 14 inches. For use with models 4115, 4120, 4115-21, 4115-22, 4120-21 and 4120-22.Milwaukee 49-67-0115...

INCLUDES: • (1) M12 FUEL™ 16 ga Nibbler Die Holder ExtensionFEATURES:• Compatible with M12™ FUEL 16 ga Nibbler• Deeper cuts• Good for cutting corrugated metal• Quick to assembleSPECIFICATIONS:• Brand / Model Compatibility: Milwaukee M12 2476-20 Nibbler•...

DETAILS: INCLUDES: • (1) Black test lead • (1) Red test lead FEATURES: • Universal Test Leads work on all digitial multimeters, clamp meters and fork meters • UL approved and Highest Safety Rating of CAT IV 600V, CATIII 1000V SPECIFICATIONS: •...

DETAILS: INCLUDES: • (1) Black test lead • (1) Red test lead FEATURES: • Universal Connecting Test Leads plug into all digital multimeters, clamp meters, and fork meters • UL approved for improved safety • One meter (39 inches) long • Constructed with...

DETAILS: INCLUDES: • (1) black Industrial Test Probe • (1) red Industrial Test Probe FEATURES: • Universal Test Probes attach to all Connecting Test Leads • UL approved for improved safety • Constructed of Stainless Steel • Constructed with rugged Rubber...

DETAILS: INCLUDES: • (1) black Industrial Alligator Clip • (1) red Industrial Alligator Clip FEATURES: • Universal Alligator Clips attach to all Connecting Test Leads • UL approved for improved safety • Jaws open to 40mm wide • Constructed with rugged...

Milwaukee 49-77-2002 Specifications: •  Temperature Range: -40° to 500° F (-40° to 260° C) •  Accuracy: ±2.5° •  Length: 39" (1 m) Milwaukee 49-77-2002 Includes: •  (1) Thermocouple Milwaukee 49-77-2002 Features: • ...

Milwaukee 49-77-3001 Specifications: •  Length: 1.75" (44 mm) Milwaukee 49-77-3001 Includes: •  (1) Magnetic Meter Holder Milwaukee 49-77-3001 Features: •  Strong magnet hold meter in place •  Allows hands free operation

Milwaukee 49-80-0292 DescriptionThe 49-80-0292 Hook Nozzle can be used with all Milwaukee Heat Guns for bending, soldering pipe, shrinking tubing or any application where the heat needs to surround the work piece. Includes nozzle only.Milwaukee...

FEATURES: • Intensified heat for removing floor coverings, paint burning, vinyl top removal • Use with any Milwaukee Heat Gun The 49-80-0294 Air Spreader Nozzle can be used with all Milwaukee Heat Guns when intensified heat is needed for removing floor...

FEATURES: • Intensified heat in a specific area - soldering • Use with any Milwaukee Heat Gun The 49-80-0297 Air Reducer Nozzle can be used with all Milwaukee Heat Guns when intensified heat is needed in a specific area - ideal for soldering. Includes...

Milwaukee 49-80-0300 Includes  Hook Nozzle (49-80-0292)  Deflector Nozzle (49-80-0293)  Air Spreader Nozzle (49-80-0294)  Air Reduction Nozzle (49-80-0297)Milwaukee 49-80-0300 Features  For most common applications  Use with...

Milwaukee 49-80-0305 DescriptionThe 49-80-0305 Air Reduction Nozzle can be used with Milwaukee Heat Guns 8978-20, 8986-20, and 8988-20 for applications where intensified, spot directed heat is needed for corners, bending plexiglass or soldering. Includes...

FEATURES: • Intensified, spot directed for corners, bending plexiglass, soldering • Similar to 49-80-0305 but for larger work areas • Use with Milwaukee Heat Gun 8978-20, 8986-20, or 8988-20 The 49-80-0306 Air Reduction Nozzle can be used with...

FEATURES: • Intensified air flow for lap welding PVC canvasses and sheets • Must be used with 49-80-0305 Air Reduction Nozzle • Use with Milwaukee Heat Gun 8978-20, 8986-20, or 8988-20 The 49-80-0308 Slit Nozzle can be used with Milwaukee Heat Guns...

Milwaukee 49-80-0400 Description Milwaukee soldering iron tips are copper core________. The tips are optimized for fast heat up times and long life. This tip can be used for most small component and wire soldering. For best performance, use with...

Milwaukee 49-80-0401 Description Milwaukee soldering iron tips are copper core________. The tips are optimized for fast heat up times and long life. This tip can be used for most small component and wire soldering. For best performance, use with...

Milwaukee 49-81-0030 Features  Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee toolMilwaukee 49-81-0030 Specifications  Voltage 18 2 BULBS PER PACK

FEATURES: • 1-1/2 in. I.D. • Canvas covered • Wire reinforced • Rubber lined Black 10 foot long canvas covered, wire reinforced, rubber lined 1-1/2 inch I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors...

Milwaukee 49-90-0040 DescriptionBlack 15 foot long neoprene lined, wire reinforced, oil resistant 1-1/2 inch I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.Milwaukee...

Milwaukee 49-90-0050 Specifications: •  I.D.: 1 1/2" •  Material: Neoprene •  Length: 25' Milwaukee 49-90-0050 Features: •  Neoprene lined, oil resistant, wire reinforced •  Two straight molded cuff ends

FEATURES: • 1-1/4 in. O.D. • Metal • For cleaning boiler tubes and furnaces This 6 foot metal hose has a 1-1/4 inch O.D. and is connected ahead of a 1-1/2 inch I.D. hose to cool off potentially hot debris when cleaning boiler tubes and furnaces.

FEATURES: • 1-1/2 in. I.D. • Crushproof multi-flex vinyl • No wire reinforcement This 7 foot long crushproof multi-flex vinyl 1-1/2 inch I.D. hose has no wire re-enforcement. Molded cuff ends fit into swivel end or compression fit connectors which are...

Milwaukee 49-90-0150 Features  The Swivel End Connector joins 1-1/2 inch I.D. hoses to the Milwaukee vacuum cleaner hose openings  Allows the hose to spin freely and tangle free without coming loose from the vacuum  Made from chrome plated...

FEATURES: • Neat, safe storage of vacuum hoses • For use with Models 8911, 8912 and 8925 Ideal for neat safe storage of vacuum hoses, this wire frame fits 14" diameter vacuum models

FEATURES: • Prevents dust and dirt contamination • Removable for cleaning • For use with Models 8935 and 8965 To prevent dust and dirt contamination, a cloth filter with a gasket (49-90-0280) covers a wire frame (49-90-0290) and surrounds the bottom...

FEATURES: • Store attachments with the vacuum cleaner • For use with Models 8924, 8926 and 8927 This handy, durable tool pouch stores the attachments for your vacuum cleaner with the vacuum. Pouch 49-90-0295 fits Milwaukee vacuum models 8924, 8926, and...

FEATURES: • For cleaning behind radiators and other hard to reach place. • Attaches to 1-1/2 in. I.D. hoses For cleaning behind radiators and other hard to reach places use the Milwaukee 15 inch crevice tool. Attaches to 1-1/2 inch I.D. hoses.

FEATURES: • Provides brushing action when needed • Attaches to 49-90-0740 Utility Nozzle Attaches directly to 6 inch Utility Nozzle (49-90-0740) to give brushing action when needed.

Milwaukee 49-90-0550 Features  Two "quick-turn" thumb screws for quick tool changing  Accommodates interchangeable 14" inserts and replacementsMilwaukee 49-90-0550 Specifications  Width 14"  For Use On 49-90-1000

Milwaukee 49-90-0560 DescriptionThe 14 inch Brush Insert is quickly attached to the Major Floor Tool (49-90-0550) by thumb screws. It is used when cleaning rough floors and large wall and ceiling surfaces.Milwaukee 49-90-0560 FeaturesFor rough floors,...

FEATURES: • Replacement fabric strips for Fabric Attachment Shoe 49-90-0560 • Set of two Replacement brush strips when originals wear out for Brush Insert 49-90-0560. Set of two.

FEATURES: • Replacement brush insert for Round Dust Brush 49-90-0730 Replacement Brush Insert when originals wear out for 3 inch Round Dust Brush 49-90-0730. Sold singly.

Milwaukee 49-90-0760 Description The heavy duty Nylon Bristle Brush has a cast aluminum body for durability and a wide mouth for fast dust pickup. It offers a 10 inch cleaning path. Compression fits a 1-1/2 inch I.D. hose. Milwaukee 49-90-0760...

Milwaukee 49-90-1100 Description Sturdy steel construction with 4 wheels and a long hinged handle to easily tip a 55 gallon drum off or on. Rolls the 55 gallon drum easily even when full of debris. Milwaukee 49-90-1100 Features  Sturdy steel...

Milwaukee 49-90-1610 Features  For safe pickup of liquids  For use with Models 8911, 8912, 8925 and 8945Milwaukee 49-90-1610 Specifications  Diameter 16"  Quantity 1