Masonry Drill Bits

Milwaukee 48-20-9017 Description MILWAUKEE® Carbide Hammer Drill Bits use sharpened carbide, delivering up to 5x life in concrete and up to 2x faster drilling. Engineered with a precision ground tip, these bits will deliver faster starts and less walking...

Milwaukee 48-20-3980 Description Milwaukee(R) SDS-Max drill bits provide faster drilling speeds, increased life, and more cordless efficiency. Breaker point pulverize the material leading to up to 20% faster drilling speeds. Rebar guards protect the bit...

Milwaukee 48-20-4360 DescriptionFour Cutter Carbide Bit Spline Bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline Drive Hammer. This positive engagement of Spline to Spline allows SDS...

Milwaukee 48-20-8096 Description Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard...

Milwaukee 48-20-4113 DescriptionTwo Cutter Carbide Bit Spline Bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline Drive Hammer. This positive engagement of Spline to Spline allows SDS...

FEATURES: • 3 in. diameter • Plastic • Used with core bit 48-20-5145 • For bit stability - reduces bit walk Use with Core Bit 48-20-5145 and Center Pin 48-20-5199 for starting a 1-1/4 inch hole. After drilling to a depth of approximately 1/4 inch,...

Milwaukee 48-20-8099 Description Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard...

Milwaukee 48-62-4062 Description Milwaukee(R) chisels are made from high grade, forged steel, providing up to 20% longer life. Bull point chisels are ideal for general demolition and starting holes in brick, block, and concrete. The long bit length...

INCLUDES: • (1) 1/2" x 4" x 6" Carbide Multi-Material Drill BitFEATURES:• For use with brick, block, concrete, steel, aluminum, ceramic tile, backer-board, wood, PVC, and drywall• Up to 85% faster in metal vs. standard masonry drill bits• SHOCKWAVE...

INCLUDES: • (1) SDS MAX Rotary Hammer Drill BitFEATURES:• Solid head carbide delivers up to 5x longer life in concrete with rebar• Rebar guards for maximum durability in hard aggregate and rebar • Sharp centering tip for exact spot drilling in concrete...

Milwaukee 48-20-3975 Description Milwaukee(R) SDS-Max drill bits provide faster drilling speeds, increased life, and more cordless efficiency. Breaker point pulverize the material leading to up to 20% faster drilling speeds. Rebar guards protect the bit...

Milwaukee 48-20-8031 Description Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard...

FEATURES: • 3/16 inch 4 flute • SDS Plus shank • 10 inch drilling depth • 12 inch overall length Milwaukee's 44 Magnum™ series carbide drilling bits offers a unique multi-faceted carbide insert reducing the breakage possibility when drilling through...

FEATURES: • 2-1/2 in. diameter • Plastic • Used with core bit 48-20-5040 • For bit stability - reduces bit walk Use with 48-20-6155 Center Pin and 48-20-5040 Thin Wall Core Bit

FEATURES: • Scaling Chisel • 3/4 inch Hex with 21/32 inch Round Shank • 2 inch width x 12 inch overall length • Made from forged high grade steel Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for removing weld...

INCLUDES: • (1) Straight Shank 3/8" X 12" Rebar CutterFEATURES:• Up to 3x life vs. competitive rebar cutters?• Up to 10x faster drilling in rebar vs. 4-cutter drill bits• Precision ground carbide for faster drilling?• Ideal for rebar embedded in...

Milwaukee 48-20-7196 DescriptionIncorporating the industry standard shank for carbide drilling bits, Milwaukee's SDS Plus bits have carbide vacuum brazed to heat treated steel shanks. The sharpened angle of the carbide creates two cutting edges. The...

INCLUDES: • (1) Straight Shank 1-3/8" X 12" Rebar CutterFEATURES:• Up to 3x life vs. competitive rebar cutters?• Up to 10x faster drilling in rebar vs. 4-cutter drill bits• Precision ground carbide for faster drilling?• Ideal for rebar embedded in...

FEATURES: • 5/8 in. diameter, 4-Cutter Carbide Bit head • Spline shank • Drilling depth 5 in. • Overall length 10 in. Four Cutter Carbide Bit Spline Bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive...

FEATURES: • 5/8 inch 4 flute • SDS Plus shank • 4 inch drilling depth • 6 inch overall length Milwaukee's 44 Magnum™ series carbide drilling bits offers a unique multi-faceted carbide insert reducing the breakage possibility when drilling through...

Milwaukee 48-89-2313 Includes(1) Red Helix Cobalt 1/4" Drill Bit Milwaukee 48-89-2313 FeaturesQUADEDGE TIP™ decreases heat build up for faster drillingRED HELIX™ for rapid material extractionENHANCED TAPERED WEB™ increases flute durability &...

Milwaukee 48-62-4089 Description Milwaukee(R) chisels are made from high grade, forged steel, providing up to 20% longer life. Scarping chisels scrape the surface rather than breaking material on top. The angled, offset head design allows for flush...

Milwaukee 48-20-3912 Description Milwaukee(R) SDS-Max drill bits provide faster drilling speeds, increased life, and more cordless efficiency. Breaker point pulverize the material leading to up to 20% faster drilling speeds. Rebar guards protect the bit...

FEATURES: • 1-3/4 in. diameter • Usable cutting depth 3 in. • Thin wall • Use with SDS Plus core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.) Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core...

FEATURES: • Clay Spade • 1-1/8 inch Collared Hex Shank with Notch • 5-1/2 inch width x 20 inch overall length • Made from forged high grade steel Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for demolition work...

FEATURES: • 2 in. diameter • Plastic • Used with core bit 48-20-5135 • For bit stability - reduces bit walk Use with Core Bit 48-20-5135 and Center Pin 48-20-5199 for starting a 1-1/4 inch hole. After drilling to a depth of approximately 1/4 inch,...

FEATURES: • Narrow Chisel • 1-1/8 inch Collared Hex Shank with Notch • 20-1/2 inch overall length • Made from forged high grade steel Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for demolition work and starting...

FEATURES: • Allows for drilling in tight spaces • Extends SDS-MAX drill and core bits • Maximum energy transfer maintains drilling productivity • Use with Max-Lok™ Connection • For use with SDS-MAX drill and core bits SPECIFICATIONS: • 82.5 inches •...

FEATURES: • 5/8 inch 4 flute • SDS Plus shank • 22 inch drilling depth • 24 inch overall length Milwaukee's 44 Magnum™ series carbide drilling bits offers a unique multi-faceted carbide insert reducing the breakage possibility when drilling through...

Milwaukee 48-62-4252 Description Milwaukee(R) Self-Sharpening chisels provide longer life and increased productivity during general demolition applications. The extended feature length at the tip of the chisel enables up to two times longer life compared...

FEATURES: • 1-1/2 in. diameter, 4-Cutter Carbide Bit head • Spline shank • Drilling depth 17 in. • Overall length 22 in. Four Cutter Carbide Bit Spline Bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive...

FEATURES: • Cold Chisel • SDS-Max Shank • 1 inch width x 11 inch overall length • Made from forged high grade steel Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for demolition work and starting holes in the...

FEATURES: • 4-Cutter Carbide Bit, Solid Carbide Tip for Up to 3X Life in Rebar • Drills More Accurate Holes for Anchoring Applications • Centering Tip for Accurate Hole Placement • Won't Lock Up in Rebar 1/4” Diameter x 6” Flute Length x 8” Overall...

Milwaukee 48-20-3910 Description Milwaukee(R) SDS-Max drill bits provide faster drilling speeds, increased life, and more cordless efficiency. Breaker point pulverize the material leading to up to 20% faster drilling speeds. Rebar guards protect the bit...

INCLUDES: • (1) SDS PLUS 3/8" X 12" Rebar CutterFEATURES:• HAMMER GUARD™ Shank protects teeth from accidental hammer impacts?• Up to 3x life vs. competitive rebar cutters?• Up to 10x faster drilling in rebar vs. 4-cutter drill bits• Precision ground...

FEATURES: • Scaling Chisel • 3/4 inch Hex Shank • 2 inch width x 12 inch overall length • Made from forged high grade steel Drop Forged of high grade steel, this Hammer Iron with heat treated work areas is used for removing weld spatter, scale and...

INCLUDES: • (1) Straight Shank 1/2" X 12" Rebar CutterFEATURES:• Up to 3x life vs. competitive rebar cutters?• Up to 10x faster drilling in rebar vs. 4-cutter drill bits• Precision ground carbide for faster drilling?• Ideal for rebar embedded in...

FEATURES: • 1/2 inch 4 flute • SDS Plus shank • 4 inch drilling depth • 6 inch overall length Milwaukee's 44 Magnum™ series carbide drilling bits offers a unique multi-faceted carbide insert reducing the breakage possibility when drilling through...

FEATURES: • 1-1/8 in. diameter, 4-Cutter Carbide Bit head • Spline shank • Drilling depth 17 in. • Overall length 22 in. Four Cutter Carbide Bit Spline Bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive...

Milwaukee 48-20-3926 Description Milwaukee(R) SDS-Max drill bits provide faster drilling speeds, increased life, and more cordless efficiency. Breaker point pulverize the material leading to up to 20% faster drilling speeds. Rebar guards protect the bit...