Ridgid
RIDGID 44587 K1500G 115 Volt Sectional Machine
(No reviews yet)
Write a Review
- SKU:
- Ridgid-44587
- UPC:
- 95691445872
- Availability:
- Usually Ships Within 24 Hours
- Weight:
- 216.00 LBS
*Images are for visual reference only.
Description
Ridgid 44587 Specifications:
• Width Wheel to Wheel: 26"
• Length Including Kickstand: 28"
• Ground to Top of Handle: 38"
• Back of Handle to Front: 49"
• Ground to Top of Housing Shell: 27"
Ridgid 44587 Includes:
• (1) Machine Only
• (1) A-1 Glove
• (1) A-12 Coupling Pin Key
• (1) A-34-10 Rear Guide Hose
Ridgid 44587 Features:
• A gasoline engine makes the K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable. Cuts through roots fast.
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control.
• Pull down on the handle and the cable spins at 600 RPM.
• Release frees cable instantly, automatic throttle control idles engine.
• Comes equipped to use 11/4" cable to clean 3" to 10" lines through 300 feet (75-250mm, 92m).
• 6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary the cable spinning speed to fit the application. Forward speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM.
• Low-profile, four-wheel cart easily rolls to the job. Guards against machine upset and possible fuel spillage.
• Width Wheel to Wheel: 26"
• Length Including Kickstand: 28"
• Ground to Top of Handle: 38"
• Back of Handle to Front: 49"
• Ground to Top of Housing Shell: 27"
Ridgid 44587 Includes:
• (1) Machine Only
• (1) A-1 Glove
• (1) A-12 Coupling Pin Key
• (1) A-34-10 Rear Guide Hose
Ridgid 44587 Features:
• A gasoline engine makes the K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable. Cuts through roots fast.
• Unique, easy-to-use, instant-acting cable clutch maximizes operator control.
• Pull down on the handle and the cable spins at 600 RPM.
• Release frees cable instantly, automatic throttle control idles engine.
• Comes equipped to use 11/4" cable to clean 3" to 10" lines through 300 feet (75-250mm, 92m).
• 6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary the cable spinning speed to fit the application. Forward speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM.
• Low-profile, four-wheel cart easily rolls to the job. Guards against machine upset and possible fuel spillage.
