Milwaukee
Milwaukee Tool CARABINER SHOCKWAVE SQ 1,2,3 SET
- SKU:
- MLW48-32-4090
- Availability:
- Usually Ships Same Day
- Weight:
- 0.18 LBS
Description
DUTY®
Square #1, #2, #3
Driver Bit Set
Keep the Square #1, #2, #3 selection together for jobs using these matching screw recesses.
Product Overview
Use the Square #1, #2 and #3 tips for jobs that repeatedly call for these screw recesses.
Match the required recess to an included tip; similar-looking profiles are not interchangeable.
- Torque absorptionSHOCK ZONE absorbs torque.
- Tip durabilityWear-resistant working tips.
- Formed tipFits the matching recess.
- Visible sizingEtched bit-size markings.
Technical Specifications
- Tip selection
- Square #1, #2, #3
- Material
- Custom Alloy76 steel
- Torque relief
- Shockzone
- Tip protection
- Wear Guard
- Size marking
- Laser-etched
- Tip design
- Custom-machined
Choose the Correct Fit
Identify the required screw drive and size before choosing a bit. Remove paint or debris so the tip seats fully.
Secure the bit in a compatible tool or holder. Verify retention and keep the tip aligned with the screw.
Installation & Care
Start slowly, then use only the force required for the fastening task. Check the assembly’s tightening requirement.
Inspect tips after repeated use. Replace cracked, rounded or twisted bits rather than forcing a damaged tip into a screw.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help checking the fit? Tell Willy your tool, accessory and working dimensions so the GetPipe team can help.
Important Product Questions
Which square sizes does this set cover?
The specified square selection is #1, #2 and #3. Match the tip to the recess; a nearby square size can damage the screw.
Why stop when the tip starts slipping?
Slipping can indicate the wrong size, poor alignment or a damaged screw. Forcing the bit can worsen the recess and make removal more difficult.
Does impact duty set the final torque?
No. Impact durability does not prevent overtightening. Use the fastener or assembly’s specified tightening method and torque.
