Milwaukee
Milwaukee Tool SHOCKWAVE Impact Duty Expand Set - 10PC
- SKU:
- MLW48-32-4513
- Availability:
- Usually Ships Same Day
- Weight:
- 0.40 LBS
Description
DUTY®
Expand
Driver Bit Set
Expand an existing fastening selection with driver bits, magnetic holders and nut-driving options.
Product Overview
Use the holders and fastening tips to complement a kit that already covers your routine screw sizes.
Match the recess to an included tip; similar-looking profiles are not always interchangeable.
- Torque absorptionSHOCK ZONE absorbs torque.
- Tip durabilityWear-resistant working tips.
- Formed tipFits the matching recess.
- Visible sizingEtched bit-size markings.
Technical Specifications
- Application
- Mixed fastening
- Hardness control
- Custom heat treatment
- Torque relief
- Shockzone
- Tip protection
- Wear Guard
- Size marking
- Laser-etched
- Tip design
- Custom-machined
Choose the Correct Fit
Identify the required screw drive and size before choosing a bit. Remove paint or debris so the tip seats fully.
Secure the bit in a compatible tool or holder. Verify retention and keep the tip aligned with the screw.
Installation & Care
Start slowly, then use only the force required for the fastening task. Check the assembly’s tightening requirement.
Inspect tips after repeated use. Replace cracked, rounded or twisted bits rather than forcing a damaged tip into a screw.
Small Details. Big Jobsite Energy.
Get set. Stay focused. Make your next move count.
THE NEXT JOB.
Ask Willy:
Need help checking the fit? Tell Willy your tool, accessory and working dimensions so the GetPipe team can help.
Important Product Questions
Can I substitute a different screw profile?
Match the specified recess and tip size. A bit that only partly engages can slip, damage the screw and make later removal harder.
Why stop when the tip starts slipping?
Slipping can indicate the wrong size, poor alignment or a damaged screw. Forcing the bit can worsen the recess and make removal more difficult.
Does impact duty set the final torque?
No. Impact durability does not prevent overtightening. Use the fastener or assembly’s specified tightening method and torque.
